MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS

Slides:



Advertisements
Similar presentations
Example 3.4 A converging-diverging nozzle (Fig. 3.7a) has a throat area of m2 and an exit area m2 . Air stagnation conditions are Compute.
Advertisements

Chapter 17 Compressible Flow Study Guide in PowerPoint to accompany Thermodynamics: An Engineering Approach, 5th edition by Yunus A. Çengel and.
One-dimensional Flow 3.1 Introduction Normal shock
MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS
Non-frictional Source of Entropy Generation… P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Rotational Inviscid Flows.
Chapter 12: Compressible Flow
Chap 5 Quasi-One- Dimensional Flow. 5.1 Introduction Good approximation for practicing gas dynamicists eq. nozzle flow 、 flow through wind tunnel & rocket.
16 CHAPTER Thermodynamics of High-Speed Gas Flow.
Review AE430 Aircraft Propulsion Systems Gustaaf Jacobs.
Chapter 17 COMPRESSIBLE FLOW
Example 3.1 Air flows from a reservoir where P = 300 kPa and T = 500 K through a throat to section 1 in Fig. 3.4, where there is a normal – shock wave.
Introduction to Propulsion
Analysis of Oblique Shocks P M V Subbarao Associate Professor Mechanical Engineering Department I I T Delhi A Mild, Efficient and Compact Compressor ….
Ch4 Oblique Shock and Expansion Waves
MAE 5130: VISCOUS FLOWS Introduction to Boundary Layers
MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS
MAE 1202: AEROSPACE PRACTICUM Lecture 12: Swept Wings and Course Recap April 22, 2013 Mechanical and Aerospace Engineering Department Florida Institute.
Gas Dynamics ESA 341 Chapter 3
Dr Kamarul Arifin B. Ahmad PPK Aeroangkasa
MAE 4262: ROCKETS AND MISSION ANALYSIS
Chapter IV Compressible Duct Flow with Friction
If the shock wave tries to move to right with velocity u 1 relative to the upstream and the gas motion upstream with velocity u 1 to the left  the shock.
MAE 4261: AIR-BREATHING ENGINES Exam 2 Review Exam 2: November 18 th, 2008 Mechanical and Aerospace Engineering Department Florida Institute of Technology.
MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS
Analysis of A Disturbance in A Gas Flow P M V Subbarao Associate Professor Mechanical Engineering Department I I T Delhi Search for More Physics through.
MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS Compressible Flow Over Airfoils: Linearized Subsonic Flow Mechanical and Aerospace Engineering Department Florida.
MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS Review: Bernoulli Equation and Examples Mechanical and Aerospace Engineering Department Florida Institute of.
Compressible Flow Introduction
P M V Subbarao Professor Mechanical Engineering Department I I T Delhi
Analysis of Expansion Waves P M V Subbarao Associate Professor Mechanical Engineering Department I I T Delhi Another Zero Cost Nozzle …..
Review of Components Analysis Aerospace Engineering, International School of Engineering (ISE) Academic year : (August – December, 2012) Jeerasak.
Supersonic Inlets - Oblique Shocks -1 School of Aerospace Engineering Copyright © 2001 by Jerry M. Seitzman. All rights reserved. AE3450 Supersonic (Engine)
The figure shows that the minimum area which can occur in a given isentropic duct flow is the sonic, or critical throat area. Choking For γ=1.4, this reduces.
Advanced fluid mechanics (II) Course content: 1.Compressible Fluid Mechanics Textbook: Modern Compressible Flow, 2 nd ed., by John D Anderson, Jr. Reference.
MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS
MAE 5310: COMBUSTION FUNDAMENTALS Detonation Mechanical and Aerospace Engineering Department Florida Institute of Technology D. R. Kirk.
MAE 5360: Hypersonic Airbreathing Engines Ramjet Overview Mechanical and Aerospace Engineering Department Florida Institute of Technology D. R. Kirk.
Lecture #10 Ehsan Roohi Sharif University of Technology Aerospace Engineering Department 1.
AERODYNAMICS-II.
Compressible Frictional Flow Past Wings P M V Subbarao Professor Mechanical Engineering Department I I T Delhi A Small and Significant Region of Curse.
First step in Understanding the Nature of Fluid Flow…. P M V Subbarao Professor Mechanical Engineering Department I I T Delhi Analysis of Simplest Flow.
MAE 4261: AIR-BREATHING ENGINES
© Fox, Pritchard, & McDonald Introduction to Fluid Mechanics Chapter 13 Compressible Flow.
MAE 5380: Advanced Propulsion Thermodynamics Review and Cycle Analysis Overview Mechanical and Aerospace Engineering Department Florida Institute of Technology.
Reflection of Oblique Shocks P M V Subbarao Professor Mechanical Engineering Department I I T Delhi A Train of Waves ….. Where to End ???
Isentropic Flow with Area Change -1 School of Aerospace Engineering Copyright © 2001 by Jerry M. Seitzman. All rights reserved. AE3450 Isentropic Flow.
Oblique Shocks -1 School of Aerospace Engineering Copyright © 2001 by Jerry M. Seitzman. All rights reserved. AE3450 Supersonic Flow Turning For normal.
Flow of Compressible Fluids. Definition A compressible flow is a flow in which the fluid density ρ varies significantly within the flowfield. Therefore,
Chapter 12 Compressible Flow
High Speed Flight Chapter 7.
WORK Work = Force x Distance POWER power = work done ÷ time taken ENERGY 1-POTENTIAL ENERGY (Potential Energy = Force x Distance ) 2-KINETIC ENERGY Energy.
Shock waves and expansion waves Rayleigh flow Fanno flow Assignment
Subject Name: FLUID MECHANICS Subject Code:10ME36B Prepared By: R Punith Department: Aeronautical Engineering Date:
CHAPTER 17 COMPRESSIBLE FLOW
MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS
Mach’s Vision of Flying
MAE 5380: AIR-BREATHING ENGINE INLETS
MAE 5360: Hypersonic Airbreathing Engines
Gas Dynamics for Design of Intakes
Analysis of Two Extreme Gas Dynamic Activities
MAE 5350: Gas Turbines Ideal Cycle Analysis
Subject Name: AIRCRAFT PROPULSION Subject Code: 10AE55
MAE 5360: Hypersonic Airbreathing Engines
MAE 5360: Hypersonic Airbreathing Engines
The Bow Shock and Magnetosheath
Introduction to Propulsion
MAE 5380: ROCKETS AND MISSION ANALYSIS
P M V Subbarao Professor Mechanical Engineering Department
Control of Entropy Generation due to Shock
Introduction to Fluid Mechanics
Presentation transcript:

MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS Overview of Shock Waves and Shock Drag Mechanical and Aerospace Engineering Department Florida Institute of Technology D. R. Kirk

PERTINENT SECTIONS Chapter 7: Overview of Compressible Flow Physics Reads very well after Chapter 2 (§2.7: Energy Equation) §7.5, many aerospace engineering students don’t know this 100% Chapter 8: Normal Shock Waves §8.2: Control volume around a normal shock wave §8.3: Speed of sound Sound wave modeled as isentropic Definition of Mach number compares local velocity to local speed of sound, M=V/a Square of Mach number is proportional to ratio of kinetic energy to internal energy of a gas flow (measure of the directed motion of the gas compared with the random thermal motion of the molecules) §8.4: Energy equation §8.5: Discussion of when a flow may be considered incompressible §8.6: Flow relations across normal shock waves

PERTINENT SECTIONS Chapter 9: Oblique shock and expansion waves §9.2: Oblique shock relations Tangential component of flow velocity is constant across an oblique shock Changes across an oblique shock wave are governed only by the component of velocity normal to the shock wave (exactly the same equations for a normal shock wave) §9.3: Difference between supersonic flow over a wedge (2D, infinite) and a cone (3D, finite) §9.4: Shock interactions and reflections §9.5: Detached shock waves in front of blunt bodies §9.6: Prandtl-Meyer expansion waves Occur when supersonic flow is turned away from itself Expansion process is isentropic Prandtl-Meyer expansion function (Appendix C) §9.7: Application t supersonic airfoils

EXAMPLES OF SUPERSONIC WAVE DRAG F-104 Starfighter

DYNAMIC PRESSURE FOR COMPRESSIBLE FLOWS Dynamic pressure is defined as q = ½rV2 For high speed flows, where Mach number is used frequently, it is convenient to express q in terms of pressure p and Mach number, M, rather than r and V Derive an equation for q = q(p,M)

SUMMARY OF TOTAL CONDITIONS If M > 0.3, flow is compressible (density changes are important) Need to introduce energy equation and isentropic relations Must be isentropic Requires adiabatic, but does not have to be isentropic

NORMAL SHOCK WAVES: CHAPTER 8 Upstream: 1 M1 > 1 V1 p1 r1 T1 s1 p0,1 h0,1 T0,1 Downstream: 2 M2 < 1 V2 < V1 P2 > p1 r2 > r1 T2 > T1 s2 > s1 p0,2 < p0,1 h0,2 = h0,1 T0,2 = T0,1 (if calorically perfect, h0=cpT0) Typical shock wave thickness 1/1,000 mm

SUMMARY OF NORMAL SHOCK RELATIONS Normal shock is adiabatic but nonisentropic Equations are functions of M1, only Mach number behind a normal shock wave is always subsonic (M2 < 1) Density, static pressure, and temperature increase across a normal shock wave Velocity and total pressure decrease across a normal shock wave Total temperature is constant across a stationary normal shock wave

TABULATION OF NORMAL SHOCK PROPERTIES

SUMMARY OF NORMAL SHOCK RELATIONS

NORMAL SHOCK TOTAL PRESSURE LOSSES Example: Supersonic Propulsion System Engine thrust increases with higher incoming total pressure which enables higher pressure increase across compressor Modern compressors desire entrance Mach numbers of around 0.5 to 0.8, so flow must be decelerated from supersonic flight speed Process is accomplished much more efficiently (less total pressure loss) by using series of multiple oblique shocks, rather than a single normal shock wave As M1 ↑ p02/p01 ↓ very rapidly Total pressure is indicator of how much useful work can be done by a flow Higher p0 → more useful work extracted from flow Loss of total pressure are measure of efficiency of flow process

ATTACHED VS. DETACHED SHOCK WAVES

Normal shock wave model still works well DETACHED SHOCK WAVES Normal shock wave model still works well

EXAMPLE OF SCHLIEREN PHOTOGRAPHS

OBLIQUE SHOCK WAVES: CHAPTER 9 Upstream: 1 M1 > 1 V1 p1 r1 T1 s1 p0,1 h0,1 T0,1 Downstream: 2 M2 < M1 (M2 > 1 or M2 < 1) V2 < V1 P2 > p1 r2 > r1 T2 > T1 s2 > s1 p0,2 < p0,1 h0,2 = h0,1 T0,2 = T0,1 (if calorically perfect, h0=cpT0) q b

OBLIQUE SHOCK CONTROL VOLUME Notes Split velocity and Mach into tangential (w and Mt) and normal components (u and Mn) V·dS = 0 for surfaces b, c, e and f Faces b, c, e and f aligned with streamline (pdS)tangential = 0 for surfaces a and d pdS on faces b and f equal and opposite Tangential component of flow velocity is constant across an oblique shock (w1 = w2)

SUMMARY OF SHOCK RELATIONS Normal Shocks Oblique Shocks

q-b-M RELATION Shock Wave Angle, b Detached, Curved Shock Strong M2 < 1 Weak Shock Wave Angle, b M2 > 1 Detached, Curved Shock Deflection Angle, q

SOME KEY POINTS For any given upstream M1, there is a maximum deflection angle qmax If q > qmax, then no solution exists for a straight oblique shock, and a curved detached shock wave is formed ahead of the body Value of qmax increases with increasing M1 At higher Mach numbers, the straight oblique shock solution can exist at higher deflection angles (as M1 → ∞, qmax → 45.5 for g = 1.4) For any given q less than qmax, there are two straight oblique shock solutions for a given upstream M1 Smaller value of b is called the weak shock solution For most cases downstream Mach number M2 > 1 Very near qmax, downstream Mach number M2 < 1 Larger value of b is called the strong shock solution Downstream Mach number is always subsonic M2 < 1 In nature usually weak solution prevails and downstream Mach number > 1 If q =0, b equals either 90° or m

EXAMPLES Incoming flow is supersonic, M1 > 1 If q is less than qmax, a straight oblique shock wave forms If q is greater than qmax, no solution exists and a detached, curved shock wave forms Now keep q fixed at 20° M1=2.0, b=53.3° M1=5, b=29.9° Although shock is at lower wave angle, it is stronger shock than one on left. Although b is smaller, which decreases Mn,1, upstream Mach number M1 is larger, which increases Mn,1 by an amount which more than compensates for decreased b Keep M1=constant, and increase deflection angle, q M1=2.0, q=10°, b=39.2° M1=2.0, q=20°, b=53° Shock on right is stronger

OBLIQUE SHOCKS AND EXPANSIONS Prandtl-Meyer function, tabulated for g=1.4 in Appendix C (any compressible flow text book) Highly useful in supersonic airfoil calculations

TABULATION OF EXPANSION FUNCTION

SWEPT WINGS: SUPERSONIC FLIGHT If leading edge of swept wing is outside Mach cone, component of Mach number normal to leading edge is supersonic → Large Wave Drag If leading edge of swept wing is inside Mach cone, component of Mach number normal to leading edge is subsonic → Reduced Wave Drag For supersonic flight, swept wings reduce wave drag

WING SWEEP COMPARISON F-100D English Lightning

SWEPT WINGS: SUPERSONIC FLIGHT M∞ < 1 SU-27 q M∞ > 1 ~ 26º m(M=1.2) ~ 56º m(M=2.2) ~ 27º

SUPERSONIC INLETS Normal Shock Diffuser Oblique Shock Diffuser

SUPERSONIC/HYPERSONIC VEHICLES

EXAMPLE OF SUPERSONIC AIRFOILS http://odin.prohosting.com/~evgenik1/wing.htm