Class 19: 3D Cartesian Coordinate Computations GISC March 2009

Class Update Remember Article Reviews (2) are due 16 April 2009.

Coordinates Geodetic reference systems use curvilinear and Cartesian (rectangular) coordinate systems that are referred to the ellipsoid. Curvilinear values: geodetic latitude, longitude and ellipsoid surface. Right-handed, earth-fixed, 3-D coordinate system. Cartesian [ X;Y;Z ]

Cartesian Coordinates Earth-Centered-Earth-Fixed (ECEF) Orientation of axes is identical to spherical earth model. X lies in equatorial plane intersecting Greenwich Y in equatorial plane at 90deg E longitude Z coincident with earth's spin axis Origin Earth Center of Mass (COM) corresponds to the center of the ellipsoid.

GPS vectors Represent differences in geocentric coordinates.

GPS Vector

Local Geodetic Horizon Coordinates LGH is an earth-fixed, right-handed, orthogonal, 3-D coordinates system having its origin at any point specified. N axis in meridian plane Positive north U axis along the normal to the ellipsoid. Positive up E axis right-handed system perpendicular to meridian plane Positive east

Local Geodetic Coordinates Referred to origin of the local geodetic system using Geodetic azimuth Vertical angle or zenith angle Mark-to-mark sland range from the origin

Geocentric ↔ Geodetic

Radius of curvature of prime vertical

Algorithms

Geocentric to Geodetic XYZ to Lat, Lon, ellipsoid height Longitude is computed as in spherical case. Both height above ellipsoid and latitude must be iterated. – Ellipsoid height requires we know latitude and radius of curvature of prime vertical – Latitude requires we know radius of curvature of prime vertical and ellipsoid height – Radius of curvature of prime vertical requires we know latitude.

Iteration required Required because latitude and ellipsoid height are dependent upon one another. One approach (used in text) is to first set ellipsoid height to 0 then solve for latitude. Then solve for h then lat again... then again

Coordinate transformations by Molodensky (translation) The values DX, DY, DZ above show the difference in origin between datums and WGS 84. Also shown are ellipsoid parameter differences.

Bursa-Wolf Transformation For geographic transformations between two geocentric datums. Applied to geocentric coordinates. – X axis points to Greenwich – Y is 90 deg east – Z is to north Consists of three translation, three rotations and scale change.

Rotations Rotations preserve the length of a vector. When we rotate the point stays fixed by the coordinate axes are moved resulting in new coordinate values. – A counter-clockwise (CCW) rotation is considered positive with respect to the old system.

Rotations Coordinates for a point in 2-D space are computed using plane trigonometry. Where r is length and theta is azimuth – X = r * cos(theta) – Y = r * sin(theta) Rotations either add or subtract an angle (gamma) from the azimuth (theta). – X' = r * cos(gamma – theta) – Y' = r * sin(gamma - theta)

Underlying trigonometry X' = r * cos(gamma – theta). We apply the difference formula (see below)

Rotation angles (detail) X' = r * cos(gamma – theta) – = r(cos(gamma)*cos(theta)+sin(gamma)sin(theta)) – = r cos(gamma)cos(theta) + r sin(gamma)sin(theta) – Since X = r * cos(gamma) and Y = r * sin(gamma) X' = X cos(theta) + Y sin(theta) Y' = r*sin(gamma – theta) – = r(sin(gamma)cos(theta)-cos(gamma)sin(theta)) – = r(sin(gamma)cos(theta) – r cos(gamma)sin(theta) Y' = -X*sin(theta) + Y*cos(theta)

Matrix form We can translate the previous page into matrix form:

Transformations Translation: coordinates are derived by merely subtracting the translations from their corresponding coordinates. – X' = X – T where T is translation vector Scale change – Can be used for feet to meter conversions. – X' = s*X where s is scale factor

Transformations Four parameter (2D)- Apply translations, rotations, and scale in two dimensions only. Seven-parameter transformation (3D) – apply three translations, three rotations and one scale change. – X' = s*R*X+T' (in alternate form below)

Matrix rotations A single axis rotation matrix is the rotation matrix that describes the effect of rotating the entire coordinate system about an axis through a specified angle. Rotation matrices are square, normal orthogonal matrices. Transpose of an normal orthogonal matrix is equivalent to its inverse.

Euler Angles D, C, B rotations retain the values for Z, Y and X respectively.

Rotations The order in which single axis rotations are performed is critical. Algebraic sign of the rotation angle is considered positive if the rotation is viewed as a counterclockwise rotation from the positive end of the axis when looking toward the origin.

Transformation Parameters Note: milli-arcseconds (mas) = (1/3600)*(pi/180)

Local Geocentric We cannot transform directly from local geodetic coordinates to geodetic coordinates. – We must use geocentric coordinates. Perform two rotations to align local system with geocentric. – Make U-axis parallel with Z-axis geocentric – Then align all corresponding axes with one another. Rotation matrix consists of geodetic coordinates of standpoint (origin).

Geocentric to Local The transpose of this rotation matrix can be used to transpose from local to geocentric. Result [ X;Y;Z] input [ E;N;U]

Matlab code