Copyright 2011, Atmel December, 2011 Atmel ARM-based Flash Microcontrollers 1 1

Copyright 2011, Atmel December, 2011 Atmel ARM-based Flash Microcontrollers 2 Agenda Atmel ARM ® -based Microcontrollers: Key Headlines Atmel Cortex™-M–based Flash Microcontrollers Overview Portfolio and Roadmap Product Offering Tools and Software

Copyright 2011, Atmel December, 2011 Atmel ARM926EJ-S–based Microcontrollers 3 Atmel Corporation 2325 Orchard Parkway San Jose, CA USA Tel:(+1)(408) Fax:(+1)(408) Atmel Asia Limited Unit 01-5 & 16, 19F BEA Tower, Millennium City Kwun Tong Road Kwun Tong, Kowloon HONG KONG Tel:(+852) Fax:(+852) Atmel Munich GmbH Business Campus Parkring 4 D Garching b. Munich GERMANY Tel:(+49) Fax:(+49) Atmel Japan G.K. 16F Shin-Osaki Kangyo Bldg OsakiShinagawa-ku, Tokyo JAPAN Tel: (+81)(3) Tel: (+81)(3) © 2011 Atmel Corporation. All rights reserved. Atmel ®, Atmel logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. ARM ®, ARMPowered ® logo and others are the registered trademarks or trademarks of ARM Ltd. Other terms and product names may be the trademarks of others. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.