New Features/Functions Ver.3 KX-TDA/TDE/NCP New Features/Functions Ver.3 Panasonic Communications CO.,LTD.

Enhanced SD or Enhanced Key “ New Features/Functions The following new features/functions are available from, - TDE MPR 3.0 Enhanced SD or Enhanced Key Note Conference feature improvement No MEC is needed. Enhanced Common Extension Feature (Common extension numbering for 2 or more PBXs) Yes CLIP of extension which set C-Fwd can be set to ISDN Network by programming option. Improved ARS function. (Dial 011 and 01 is supported) 128 IP-PT by MPR card is supported. Display power unit type. Sales company mode FAX auto transfer via ESVM Max. IP trunk simultaneous call (SIP-Trunk + H.323 G/W) 32 ➔ 64

Enhanced SD or Enhanced Key “ New Features/Functions The followings are minor modification from, - TDE MPR 3.0 Enhanced SD or Enhanced Key Note Official support for KX-DT3xx No American PRI caller ID support. Canadian PRI caller name support Max. Number of A/K 40 ➔100

New Conference Function (8-Party Conference and Broadcast)

8-Party Conference and Broadcast -1 “ 8-Party Conference and Broadcast -1 Outline - A PT (Owner) can call multiple parties, assigned as members of a conference group. - Max. 8 conference groups can be programmed. - 2 Conference Mode: - 8-Party Conference Mode (Owner + 7 members): Two-way communication. - Broadcast Mode (Owner + 31 members): One way communication. Cannot mix Broadcast or Conference feature - not possible on same system. External External terminals (ISDN/Analogue) can be members of a conference group. ISDN Analogue A MEC card is needed. Owner QSIG extensions (Remote office) can be member of a conference group. MEC QSIG Local Remote

8-Party Conference and Broadcast - 2 “ 8-Party Conference and Broadcast - 2 8-Party Conference Mode Owner Two-way Max. 7 Members One way N/A Broadcast Mode Owner Two-way N/A One way Max. 31 Members The Owner can control local PBX members. Owner Two-way Max. 7 Members One way Max. 24 Members

8-Party Conference and Broadcast - 3 “ 8-Party Conference and Broadcast - 3 The number of simultaneous conference calls Group-1 Owner Two-way One way N/A Group-x Owner Two-way N/A One way Total 32 Terminals Group-8 Owner Two-way One way

8-Party Conference and Broadcast - 4 “ 8-Party Conference and Broadcast - 4 Member Control (8-Party Conference Mode) Available terminals Local PBX Extensions External parties ISDN/Analogue Non-listed Ext. Can Join Owner Two-way Max. 7 Members One way IN/OUT Disconnect The Owner can control local PBX members.

8-Party Conference and Broadcast - 5 “ 8-Party Conference and Broadcast - 5 Member Control (Broadcast Mode) Available terminals Local PBX Extensions External parties ISDN/Analogue Non-listed Ext. Can Join Owner Two-way Max. 7 Members One way IN/OUT Disconnect The Owner can control local PBX members.

8-Party Conference and Broadcast - 6 “ 8-Party Conference and Broadcast - 6 8-Party Conference Mode Owner System Programming 8-party conference Total 8 parties

8-Party Conference and Broadcast - 7 “ 8-Party Conference and Broadcast - 7 Broadcast Mode Owner System Programming 31 Broadcasting Total 32 parties

8-Party Conference and Broadcast - 8 “ 8-Party Conference and Broadcast - 8 Owner Extension System Programming Can be - D-PT - IP-PT - PBX-DECT Should be “Enable” Cannot be - SLT - ISDN-Ext. - SIP Ext. - External Caller

8-Party Conference and Broadcast - 9 “ 8-Party Conference and Broadcast - 9 Conference Groups System Programming System Program Max. 8 Groups

8-party conference members “ 8-Party Conference and Broadcast - 10 Members (8-party Conference Mode) System Programming 8-party conference members Max.7

8-Party Conference and Broadcast - 11 “ 8-Party Conference and Broadcast - 11 Members (Broadcast Mode) System Programming Max.31 31Broadcast members

8-Party Conference and Broadcast - 12 “ 8-Party Conference and Broadcast - 12 Members System Programming 20１ 202 203 301 302 74771111 74771112 04771111 04771112 Member Can be - PT/SLT/ISDN - PS - SIP - TIE Extension - External line (ISDN/Analogue) Cannot be - ICD-Group - PS Ring Group - VM Group - External Pager DISA

8-Party Conference and Broadcast - 13 “ 8-Party Conference and Broadcast - 13 Make a conference From an owner Extension, Normal mode : Dial *32 + Conference group number + # Security mode : Dial *32 + Conference group number + Conference Password + # LCD: Calling / Called Extension Conference1: PCCUK When a member of the group answers the call. LCD: Calling Extension LCD: Called Extension No of member Conference : 2 Conference

8-Party Conference and Broadcast - 14 “ 8-Party Conference and Broadcast - 14 If a member does not answer the call? System Programming Ringing stops via a pre-programmed timer.

8-Party Conference and Broadcast - 15 “ 8-Party Conference and Broadcast - 15 Member Control (8-party Conference Mode) Dial *32 + conference group number # ➔ Extension answers (All Extension are in conference mode). Group-1 7 Members Multi party Conference 20１ 202 203 Owner 201 Two Way 202 201 202 203 DSS 203

8-Party Conference and Broadcast - 16 “ 8-Party Conference and Broadcast - 16 Member Control (8-party Conference Mode) ➔ Press “DSS” button (Owner) ➔ Remove the member from conference mode ➔ Press “DSS” button (Owner) again ➔ Establish the conversation again. (Similar Operation can be done by the CONF/TRANSFER keys.) Group-1 7 Members Multi party Conference 20１ 202 203 Owner DSS 201 201 Two Way DSS 202 202 201 202 203 203 One Way DSS

*32# + Conference group number + # “ 8-Party Conference and Broadcast - 17 Member Control (8-party Conference Mode) Non listed Member: Dial *32# + Conference group number + # ➔ Join the conference. Group-1 7 Members Multi party Conference 20１ 202 203 Owner 201 Two Way 202 KX-HGT100 Possible If a customer needs security, please use the security conference mode. 201 202 203 203 DSS *32# + Conference group number + # 204 204

8-Party Conference and Broadcast - 18 “ 8-Party Conference and Broadcast - 18 Make a conference (Security Mode) From an owner Extension, Dial *32 + Conference group number + Conference password + # Conference password : 1-8 digits (0-9) or *: Owner can decide when making the conference. Group-1 7 Members Multi party Conference If the owner uses * as conference password, nobody can join the conference. Owner 201 Two Way 202 201 202 203 203 *32# + Conference group number + Conference password + # DSS 204 204

8-Party Conference and Broadcast - 19 “ 8-Party Conference and Broadcast - 19 Member Control (Broadcast Mode) Dial *32 + conference group number # ➔ Extension answers (All Extension are in Broadcasting mode). Group-1 7 Members Multi party Conference 20１ 202 203 204 Owner 201 Two Way 202 203 One Way 204

8-Party Conference and Broadcast - 20 “ 8-Party Conference and Broadcast - 20 Member Control (Broadcast Mode) ➔ Press “DSS” button (Owner) ➔ Establish the conversation. Max. 7 Broadcasting Members can join a multi party conference. Group-1 7 Members Multi party Conference DSS (201) In 20１ 202 203 204 Owner 201 201 Two Way DSS (202) In 202 202 201 202 203 Max.7 203 One Way DSS 204

8-Party Conference and Broadcast - 21 “ 8-Party Conference and Broadcast - 21 Member Control (Broadcast Mode) ➔ Press “DSS” button (Owner) ➔ Remove the member from conference mode. Group-1 7 Members Multi party Conference DSS (201) Out 20１ 202 203 204 Owner 201 201 Tow Way DSS (202) Out 202 202 201 202 203 203 One Way DSS 204

8-Party Conference and Broadcast - 22 “ 8-Party Conference and Broadcast - 22 Member Control (Broadcast Mode) If a Broadcasting member wants to join, ➔ Press “200 DSS” button (Ext.201) ➔ Off-hook call tone on the owner Ext. ➔ Press “201 DSS” button (Owner) ➔ Establish the conversation. Group-1 7 Members Press “DSS” Multi party Conference I want to join (Meet Me) 200 202 203 Owner 201 Two Way 200 DSS 202 Off-hook call tone 203 This function is only possible on local extensions. Not possible: Remote Extensions External Parties

8-Party Conference and Broadcast - 23 “ 8-Party Conference and Broadcast - 23 Member Control (Broadcast Mode) When 7 broadcasting member are in the same multi party conference, the 8th member cannot join to the multi party conference, Group-1 7 Members Multi party Conference 20１ 202 203 204 205 206 207 208 Owner 201 Two Way 202 203 201 202 203 204 205 207 Max.7 Cannot join DSS 208

8-Party Conference and Broadcast - 24 “ 8-Party Conference and Broadcast - 24 Member Control (Remote Ext./External Party) Join Conference Possible: - Local Extensions - External parties through ISDN - External parties through Analogue Not Possible: - Remote Extensions External External ISDN Analogue Great !!!! Yes QSIG No Yes Local Remote Owner Conference

External Party Numbers “ 8-Party Conference and Broadcast - 25 Member Control (Remote Ext./External Party) Conference Member Programming External External 20１ 202 203 04771111 04771112 05771111 05771112 477-xxxx 577-xxxx External Party Numbers ISDN Analogue Great !!!! Yes NB: The PBX cannot see an analogue line call status (E.g. Answer, Disconnect) , therefore the PBX does not release the line until the conference is finished. Owner Conference

8-Party Conference and Broadcast - 26 “ 8-Party Conference and Broadcast - 26 Member Control (Remote Ext./External Party) If a PBX owner does not want an employee to make a conference with external party, please set the reserved bit 07-6 to “Enable” External External ISDN Analogue Sales Company Mode Yes Reserved bit 07-6 Enable : Not possible Disable : Possible (Default) Owner Conference

8-Party Conference and Broadcast - 27 “ 8-Party Conference and Broadcast - 27 Member Control (How to Join from External Party - 1) External 1- Dial to DISA 3- Dial *47+ *Verification Code + PIN or Dial *47 + Ext. No. + PIN 5- Dial *32# + Conference group number + Conference password + # ISDN Analogue 2- DISA answers Join Conference DISA 4- Confirmation Tone An external caller cannot start a conference via DISA. Owner Conference

8-Party Conference and Broadcast - 28 “ 8-Party Conference and Broadcast - 28 Member Control (How to Join from External Party - 2) External CLIP 488-1234 1- Dial to DISA 3- Dial *32# + Conference group number + Conference password + # ISDN Join Conference 2- DISA answers System Speed Dial (SSD) Entry 000: 0488-1234: CLI Ext.201 DISA Enhanced SD or Enhanced Key An external caller cannot start a conference via DISA. Owner Conference

8-Party Conference and Broadcast - 29 “ 8-Party Conference and Broadcast - 29 System Programming Default: Disable Option: Enable System Programming (System Speed Dial) Tanaka 04881234 201 Yamada 04881235 202 Toyota 04881236 203

8-Party Conference and Broadcast - 30 “ 8-Party Conference and Broadcast - 30 Member Control (Remove member) ➔ Press “FLASH/RECALL” button ➔ Remove (Disconnect) the member who joined the Multi party conference last. Multi party Conference Join Order 1st 201 2nd 203 The last Group-1 Out of Conference Multi party Conference One way 201 Two Way FLASH/RECALL Owner 202 201 202 203 204 Disconnect 203 203 204

8-Party Conference and Broadcast - 31 “ 8-Party Conference and Broadcast - 31 Member Control (Remove member) ➔ Press “FLASH/RECALL” button ➔ Remove (Disconnect) the member who joined the Multi party conference last. Multi party Conference Join Order 1st 202 2nd 201 The last Group-1 Out of Conference Multi party Conference Disconnect 201 201 Two Way FLASH/RECALL Owner 202 201 202 203 204 203 204

8-Party Conference and Broadcast - 32 “ 8-Party Conference and Broadcast - 32 Member Control (Remove member) ➔ Cannot directly control a member (Disconnect by Flash/Recall button) in the one way area. Multi party Conference Join Order 1st 202 2nd 201 Group-1 Out of Conference Multi party Conference One way 201 Two Way Owner 202 201 202 203 204 Disconnect 203 204

8-Party Conference and Broadcast - 33 “ 8-Party Conference and Broadcast - 33 Member Control (Remove member) Question: How to disconnect the one way members. Multi party Conference Join Order 1st 202 2nd 201 Group-1 Out of Conference Multi party Conference One way 201 Two Way Owner 202 201 202 203 204 Disconnect ? 203 204

8-Party Conference and Broadcast - 34 “ 8-Party Conference and Broadcast - 34 Member Control (Remove member) ➔ Can control (Disconnect by Flash/Recall button) an external party. Multi party Conference Join Order 1st 201 2nd 202 3rd 203 4th External Group-1 Out of Conference Multi party Conference One way 201 Two Way FLASH/RECALL Owner 202 201 202 203 CO1 203 Disconnect

8-Party Conference and Broadcast - 35 “ 8-Party Conference and Broadcast - 35 System Programming Group-1 Multi party Conference The Owner extension “Flash Mode” should be “Flash Recall” Mode. 201 Two Way Owner 202 Out of Conference 201 202 203 204 203 204

8-Party Conference and Broadcast - 36 “ 8-Party Conference and Broadcast - 36 Conditions, if an extension has, Set to C-FWD ? ➔ The broadcast call arrives this extension. Set to DND ? ➔ The broadcast call does not arrive this extension. Busy ? ➔ Call waiting function will be performed. Auto Answer ➔ The Auto Answer function will not be performed. SXDP-PS ? ➔ The broadcast call does not arrive this PS. Internal Call Block is Block ➔ The broadcast call does not arrive this extension. Other Conditions If owner extension has DSS key of a member of broadcasting group and establishes a broadcasting call, the DSS key does not flash when the called extension rings. It actually turns red (not flashing).

Enhanced Common Extension Feature Common extension numbering for 2 or more PBXs

Enhanced Common Extension Feature - 1 “ Enhanced Common Extension Feature - 1 Common Extension over multi PBX Connection Common Extension numbering function is an Enhanced function. ➔ Enhanced A/K/SD card is required. Office-2 10.10.10.2 102 DSP H323 G/W Office-3 Office-1 DSP H323 G/W DSP H323 G/W IP Net 10.10.10.3 10.10.10.1 103 101 DSP H323 G/W How to Program ? 10.10.10.4 104 Office-4

Enhanced Common Extension Feature - 2 “ Enhanced Common Extension Feature - 2 GW Setting and DN2IP Office-1 Office-2 Office-3 Office-4 Ext. Destination IP 102 10.10.10.2 101 10.10.10.1 103 10.10.10.3 104 10.10.10.4 Only 512 Entries Not easy

Enhanced Common Extension Feature - 3 “ Enhanced Common Extension Feature - 3 Enhanced Common Extension Operation All PBX have to be TDE/NCP MPR 3.0. TDE/NCP MPR 3.0 10.10.10.2 102 DSP H323 G/W TDE/NCP MPR 3.0 TDE/NCP MPR 3.0 DSP H323 G/W DSP H323 G/W IP Net 10.10.10.3 10.10.10.1 103 101 DSP H323 G/W 10.10.10.4 104 TDE/NCP MPR 3.0

Enhanced Common Extension Feature - 4 “ Enhanced Common Extension Feature - 4 GW Setting and DN2IP Program Point Very easy !!!! This function is available on Virtual-IPG/W-16, not on Physical IP-GW16.

Enhanced Common Extension Feature - 5 “ Enhanced Common Extension Feature - 5 How to works 10.10.10.2 102 3- It is not mine 1- Dial 103 2- Setup IP Net 10.10.10.3 10.10.10.1 5- Setup 103 101 4-Hunting

Enhanced Common Extension Feature - 6 “ Enhanced Common Extension Feature - 6 Logically, it is possible to connect Max.100 PBXs. Why 100 PBXs? Office-2 10.10.10.2 101 Office-xx Office-1 IP Net 10.10.10.xx 10.10.10.1 1xx 100 10.10.10.100 199 Office-100

Call-FWD CLIP

Call-FWD CLIP - 1 “ Previous Function Subscriber-A CLIP 477-1111 My Extension CLIP 577-1234 Subscriber-A CLIP 477-1111 1 C-FWD to my cellular ISDN 2 4 3 CLIP = 477-1111 My cellular 1- Subscriber-A (CLIP 477-1111) calls your extension. 2- The call is re-routed to your cellular. ➔ CLIP = 477-1111 3- The ISDN provider does not accept “CLIP=477-1111” Because, 477-1111 is Out of DDI range 577-1111-1999. 4- The ISDN provider sends the main DDI number “577-1111” to the C-FWD destination. ➔ But, I want to have CLIP=577-1234.

Please select “Disable” Call-FWD CLIP - 2 New Function My Extension CLIP 577-1234 Subscriber-A CLIP 477-1111 1 C-FWD to my cellular ISDN 2 4 3 CLIP = 577-1234 My cellular Please select “Disable”

Call-FWD CLIP - 3 “ OR TDA/TDE Previous (FYI) CO-to-CO CO-to-CO ISDN Ext. 101 CLIP : 577-1234 C-FWD 9-882-1111 Caller’s CLIP: 477-1111 CO-to-CO ISDN CLIP: 477-1111 Received CLIP:???????? OR Ext. 101 CLIP : 577-1234 C-FWD 9-882-1111 Caller’s CLIP: 477-1111 CO-to-CO ISDN CLIP: 577-1999 Received CLIP:5771999 577-1999

Call-FWD CLIP - 4 “ Previous Countermeasure (FYI) Ext. 101 CLIP : 577-1234 C-FWD 601 ICD-Group Ext.601 Ext. 501 (Dummy PS) CO-to-CO ISDN CLIP: 5771234 Dummy PS setting Ext. 501 (FWD- 9-882-1111) Ext. CLIP: 5771234 Received CLIP:5771234 - Enhanced SD card is needed. - Program is complicated. 501 5771234

Improved ARS function

Improved ARS function - 1 “ Improved ARS function - 1 Previous ARS Function Dial 9/0 0xxx ISDN Analogue ARS=ON Need more flexible ARS routing plan. ARS Routing Table Leading Number Routing Plan 1 01 2 011 3 0111 4 Dial 9/0 0xxx Dial 9/0 01xx Dial 9/0 011x Dial 9/0 0111x Every Time, the routing plan-1 is selected.

Improved ARS function - 2 “ Improved ARS function - 2 New ARS Function ARS Routing Table Leading Number Routing Plan 1 01 2 011 3 0111 4 Dial 9/0 0X(e1) the routing plan-1 Dial 9/0 01X(e1) the routing plan-2 Dial 9/0 011X(e1) the routing plan-3 Dial 9/0 0111X the routing plan-4

Improved ARS function - 3 “ Improved ARS function - 3 New ARS Function ARS Routing Table Leading Number Routing Plan 1 01 2 011 3 0111 4 Dial 9/0 02 the routing plan-1 Dial 9/0 (CO access Code) Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number. Dial 2 ➔ Matched 0 ➔ Select the routing plan-1

Improved ARS function - 4 “ Improved ARS function - 4 New ARS Function ARS Routing Table Leading Number Routing Plan 1 01 2 011 3 0111 4 Dial 9/0 012 the routing plan-2 Dial 9/0 (CO access Code) Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number. Dial 1 ➔ Matched 01, 011, 0111 ➔ Wait next number. Dial 2 ➔ Matched 01 ➔ Select the routing plan-2

Improved ARS function - 5 “ Improved ARS function - 5 New ARS Function ARS Routing Table Leading Number Routing Plan 1 01 2 011 3 0111 4 Dial 9/0 0112 the routing plan-3 Dial 9/0 (CO access Code) Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number. Dial 1 ➔ Matched 01, 011, 0111 ➔ Wait next number. Dial 1 ➔ Matched 011, 0111 ➔ Wait next number. Dial 2 ➔ Matched 011 ➔ Select the routing plan-3

Improved ARS function - 6 “ Improved ARS function - 6 New ARS Function ARS Routing Table Leading Number Routing Plan 1 01 2 011 3 0111 4 Dial 9/0 0111 the routing plan-4 Dial 9/0 (CO access Code) Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number. Dial 1 ➔ Matched 01, 011, 0111 ➔ Wait next number. Dial 1 ➔ Matched 011, 0111 ➔ Wait next number. Dial 1 ➔ Matched 0111 ➔ Select the routing plan-4

Improved ARS function - 7 “ Improved ARS function - 7 New ARS Function ARS Routing Table Leading Number Routing Plan 1 01 2 011 3 0111 4 Dial 9/0 0 + No dial the routing plan-1 Dial 9/0 (CO access Code) Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number. No dial ➔ “Inter-digit Timer” has ended. ➔ Select the routing plan-1

Improved ARS function - 8 “ Improved ARS function - 8 If a customer wish to use the previous Function There is no option setting to disable the new function.

128 IP-PT by MPR card is supported.

“ 128 IP-PT - 2 TDA/TDE MPR 3.0 (128 IP-Extensions) 128 = 32 x 4

128 IP-PT - 3 “ TDA/TDE MPR 3.0 (128 IP-Extensions) 128 = 32 x 4 128 SIP Extension is possible.

Display power unit type

Display power unit type “ Display power unit type Command Power unit type Sales company log in mode.

FAX auto transfer via ESVM

FAX auto transfer via ESVM “ FAX auto transfer via ESVM TDA/TDE Previous MPR We can not use ESVM/B-ESVM TDA/TDE MPR 3.0 We can use ESVM (not B-ESVM).

Max. IP trunk simultaneous call

Max. IP trunk simultaneous call - 1 “ Max. IP trunk simultaneous call - 1 TDA/TDE Previous MPR DSP SIP G/W 32ch Total Max.32 calls H.323 G/W 32ch TDA/TDE MPR 3.0 DSP SIP G/W 32ch Total Max.64 calls H.323 G/W 32ch

Max. IP trunk simultaneous call - 2 “ Max. IP trunk simultaneous call - 2 Max. 32 calls (Default) Max. 64 calls (Option) Sales Company Mode Reserved bit 06-7 Enable : 64 Calls

Thank You Very Much For Your Attention