New Features/Functions Ver.4 (Edition-7) KX-TDE/NCP New Features/Functions Ver.4 (Edition-7) Panasonic System Networks CO.,LTD.

New Features/Functions - 1 “ New Features/Functions - 1 The new features/functions are available from, - KX-NCP500/1000 MPR Ver.4. - KX-TDE100/200/600 MPR Ver.4. Note VoIP Expansion - IP-TSW Speech Path New MPR Required - 64ch SIP Trunk - VoIP Channel Capacity - DECT-CS on NCP Network Feature Enhancement - Message Waiting A/K is needed - Absent Message - Called party name display before answer - Call Waiting Network ICD-Group (UCD is supported) Improved Conference Group Function Improved Conference Features Paging to DECT Call-FWD CLIP Improved Centralized VM Function

New Features/Functions - 2 “ New Features/Functions - 2 The new features/functions are available from, - KX-NCP500/1000 MPR Ver.4. - KX-TDE100/200/600 MPR Ver.4. Note Improved Call-FWD N/A Function (Ringing after C-FWD) A/K is needed Improved CA integration Alternative call if VoIP call fails Improve VoIP (H.323) Connection - Support Non-Fast Connect - H323-ID registration Other Improvements - BSS Operation Programming Reserve Bit Function

VoIP Expansion - IP-TSW Speech Path - 64ch SIP Trunk - VoIP Channel Capacity - DECT-CS on NCP

VoIP Expansion “ Ver.4 Improvements PBX TDE600 TDE100/200 NCP1000 Version Ver.3 Ver.4 Ver.2 IP-TSW Speech Path (ch) (*1) 49 113 SIP-Trunk (ch) 32 64 8 IP-PT SIP Ext (ch) 128 40 IP-PT 32 SIP IP-CS (Units) 16 *1) New MPR card is needed. Trunk/Extension Protocol Ver.4 TTL IP-Trunk H.323 32ch (*2) 64 ch SIP Trunk 64ch IP-Extension IP-PT 128ch 128 ch SIP-Ext. IP-CS 128ch (16 units) *2) H.323 IP-Trunk of NCP500 expands 32ch, same as NCP1000, TDE100/200/600.

IP-TSW Speech Path (113 path) -1 “ IP-TSW Speech Path (113 path) -1 New MPR Card + Ver.3 = 49 path Old MPR Card + Ver.4 = 49 path New MPR Card + Ver.4 = 113 path CO IP Trunk MPR Legacy DSP IP-Ext. IP CS How to identify new H/W New MPR card is needed.

IP-TSW Speech Path (113 path) - 2 “ IP-TSW Speech Path (113 path) - 2 How to identify new H/W Old H/W Should be “XA” New H/W

64ch SIP Trunk -1 “ Ver 4.0 Ver 4.0 TDE100/200/600 16ch x 2 16ch x 4 NCP1000 Ver.2 16ch x 2 16ch x 4 NCP500 Ver.2 8ch x 1 16ch x 4 Only Software upgrade.

64ch SIP Trunk -2 “ Ver 2/3 Ver 4.0 16ch x 2 64ch x 1 Ver.2/3 supports 32ch SIP Trunk. Two contracts/accounts (16ch + 16ch) Ver.4 supports 64ch SIP Trunk. Supports 64ch by one contract/account New PCMC Channel Attribute Programming Menu

VoIP Channel Capacity - 1 “ VoIP Channel Capacity - 1 DSP Power DSP Resource Source -1 Source - 2 DSP Resource Traditional (CO/Ext.) IP-Trunk (G711) 2 3 IP-Trunk (G729) 5 IP-Ext./IP-CS (G711) 1 IP-Ext./IP-CS (G729) 4 IP-Ext.(G711) 6 IP-Ext.(G729) 8 IP-CS (G711) 7 IP-CS (G729) 9 DSP -4 -16 -64 16 64 256 DSP-64 DSP-4/16

VoIP Channel Capacity - 2 “ VoIP Channel Capacity - 2 The max. number of simultaneous telephone calls (NCP1000/500). Talking Party NCP1000 NCP500 DSP 4 16 64 IP-Trunk  IP-PT G711  G711 8 32 G711  G729 2 12 42 G729  G729  SIP 5  IP-CS 3 18 50 9 35 1 27 IP-Trunk  Legacy Ext G711 44 28 G729 SIP Trunk [Restriction Key] H.323 Trunk DSP Power-1 Number of TDM-IP Channels Number of Trunks Number of Handsets. DSP Power-2

VoIP Channel Capacity - 3 “ VoIP Channel Capacity - 3 The max. number of simultaneous telephone calls (NCP1000/500). Talking Party NCP1000 NCP500 DSP 4 16 64 Legacy-CO  IP-PT G711 G729  SIP  IP-CS Legacy-Ext 44 28 [Restriction Key] DSP Power-1 Number of TDM-IP Channels Number of Trunks Number of Handsets. DSP Power-2

VoIP Channel Capacity - 4 “ VoIP Channel Capacity - 4 The max. number of simultaneous telephone calls (NCP1000/500). Talking Party NCP1000 NCP500 DSP 4 16 64 IP-CS  IP-PT G711  G711 8 32 56 G711  G729 3 12 42 G729  G729 2  SIP  IP-CS [Restriction Key] DSP Power-1 Number of TDM-IP Channels Number of Trunks Number of Handsets. DSP Power-2

VoIP Channel Capacity - 5 “ VoIP Channel Capacity - 5 The max. number of simultaneous telephone calls (TDE100/200/600). Talking Party TDE100/200 TDE600 DSP 4 16 64 IP-Trunk  IP-PT G711  G711 - 32 G711  G729 12 42 G729  G729 8  SIP  IP-CS 18 50 9 35 5 27 IP-Trunk  Legacy Ext G711 G729 SIP Trunk [Restriction Key] H.323 Trunk DSP Power-1 Number of TDM-IP Channels Number of Trunks Number of Handsets. DSP Power-2

VoIP Channel Capacity - 6 “ VoIP Channel Capacity - 6 The max. number of simultaneous telephone calls (TDE100/200/600). Talking Party TDE100/200 TDE600 DSP 4 16 64 Legacy-CO  IP-PT G711 - 113 G729  SIP  IP-CS Legacy-Ext [Restriction Key] DSP Power-1 Number of TDM-IP Channels Number of Trunks Number of Handsets. DSP Power-2

VoIP Channel Capacity - 7 “ VoIP Channel Capacity - 7 The max. number of simultaneous telephone calls (TDE100/200/600). Talking Party TDE100/200 TDE600 DSP 4 16 64 IP-CS  IP-PT G711  G711 - 32 56 G711  G729 12 42 G729  G729 8  SIP  IP-CS [Restriction Key] DSP Power-1 Number of TDM-IP Channels Number of Trunks Number of Handsets. DSP Power-2

DECT-CS on NCP “ The max. number of CS/PS. CS factor Ver.2 Ver.4 KX-TDA0158 2 4 3 5 KX-TDA0141/0155 1 8 7 11 KX-NCP0158 6 16 Max. CS factor 12 32 Max. PS 64

Network Feature Enhancement

Network Feature Enhancement “ Network Feature Enhancement The following features are newly supported from Ver.4 1 When calling extension in other PBX - Leave Message Waiting - Absent Message Display - Called party name display before answer 2 When extension in other PBX is busy - Call Waiting - Busy Override - Call Back - Call Monitor 3 When extension in other PBX is DND - DND Override, DND tone and LCD 4 Incoming call from extension in other PBX - Ring tone (Single or Double) as extension call - Call FWD / DND as extension call - Automatic answer as extension call - Extension call block by COS-COS 5 Incoming call to extension in other PBX - Directed Call Pickup

Network Feature Enhancement - 1 “ Network Feature Enhancement - 1 Message Waiting A/K is needed Ext.1001 Ext.2001 Call VoIP-Net Free/Busy 1- Ext.1001 calls Ext.2001 (Free) 2- Ext.2001 does not answer. 3- Press “Message Waiting” button on Ext.1001. 4- The Message Waiting LED on Ext.2001 turns Red. - Ext.2001 can call back to Ext.1001 press “Message Waiting” button. 1- Ext.1001 calls Ext.2001 (Busy) 2- Ext.1001 receive “Busy Tone” 3- Press “Message Waiting” button on Ext.1001. 4- The Message Waiting LED on Ext.2001 turns Red. - Ext.2001 can call back to Ext.1001 press “Message Waiting” button. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 2 “ Network Feature Enhancement - 2 Absent Message Display A/K is needed Ext.1001 Ext.2001 1. Call 2. Send “Go Home” VoIP-Net Absent Message “Go Home” 1- Ext.1001 calls Ext.2001 (Absent Message “Go Home) 2- “Go Home” is displayed on Ext.1001. Go Home The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 3 “ Network Feature Enhancement - 3 Calling party name display before answer (Already Supported) Ext.2001 1. Call 2. Send “Tanaka” VoIP-Net Ext.1001 Tanaka A/K is needed 1001: Tanaka Ver.4 Internal call Tanaka 1001 Before Ver.4 External call 1- Ext.1001 (Tanaka) calls Ext.2001 2- Calling party name (Tanaka) is displayed on Ext.2001. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 4 “ Network Feature Enhancement - 4 Called party name display before answer Ext.1001 1. Call 2. Send “Tanaka” VoIP-Net 3. Send “Honda” Ext.2001 Honda A/K is needed 2001: Honda 1- Ext.1001 (Tanaka) calls Ext.2001 2- Calling party name (Tanaka) is displayed on Ext.2001. 3- Called party name (Honda) is displayed on Ext.1001. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 5 “ Network Feature Enhancement - 5 Call Wait Call waiting : ON A/K is needed 3. Press “WAIT” Ext.2001 1. Call 2. Send “Busy” Info. VoIP-Net 4.Call Wait Ext.1001 Talking 1- Ext.1001 calls Ext.2001 (Busy) 2- Ext.1001 LCD 2001: Busy WAIT OVER C.BCK Ext.2002 3- Press “WAIT” button. 4- Call waiting on Ext.2001. Call waiting (Ext.2001) has to be “ON”. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 6 “ Network Feature Enhancement - 6 Busy Override A/K is needed 3. Press “OVER” Ext.2001 1. Call 2. Send “Busy” Info. VoIP-Net 4. Override Ext.1001 Talking 1- Ext.1001 calls Ext.2001 (Busy) 2- Ext.1001 LCD 2001: Busy WAIT OVER C.BCK Ext.2002 3- Press “OVER” button. 4- We can override (Barge-in) the communication between Ext.2001 and 2002. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 7 “ Network Feature Enhancement - 7 Call Monitor A/K is needed Ext.1001 Ext.2001 1. Call 2. Send “Busy” Info. 3. Press “5” VoIP-Net 4. Monitor Talking 1- Ext.1001 calls Ext.2001 (Busy) 2- Ext.1001 LCD 2001: Busy WAIT OVER C.BCK Ext.2002 3- Press “5” button. 4- We can monitor the communication between Ext.2001 and 2002. The function works over, Extension Numbering & PBX Numbering.

Monitor/Busy Override “ Network Feature Enhancement - 8 Related program for Call Monitor/Busy Override Ext.1001 Ext.2001 Busy Monitor/Busy Override VoIP-Net Talking Related program. Ext.2002

Monitor/Busy Override “ Network Feature Enhancement - 9 Related program for Busy Override Ext.1001 Ext.2001 Monitor/Busy Override VoIP-Net Talking Related program. Ext.2002

Network Feature Enhancement - 10 “ Network Feature Enhancement - 10 Call Back 3. Press “C.BAK” Ext.2001 Busy 1. Call 2. Send “Busy” Info. VoIP-Net Ext.1001 Busy 1- Ext.1001 calls Ext.2001 (Busy) 2- Ext.1001 LCD 2001: Busy WAIT OVER C.BCK 3- Press “C-BCK” button. 4- When Ext.2001 became idle, Ext.1001 starts ring. (Call back starts) The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 11 “ Network Feature Enhancement - 11 DND A/K is needed 3. Press “OVER” Ext.2001 Busy 1. Call 2. Send “DND” Info. 4. Ring VoIP-Net Ext.1001 DND 1- Ext.1001 calls Ext.2001 (DND) We can see the other end set to “DND” 2- Ext.1001 LCD 2001: Do Not Disturb OVER - “DND” Tone on Ext.1001 3- Press “OVER” button. 4- Ext.2001 starts ringing. The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 12 “ Network Feature Enhancement - 12 DND A/K is needed 3. Press “OVER” Ext.2001 Busy 1. Call 2. Send “DND” Info. 4. Ring VoIP-Net Ext.1001 DND Related program.

Network Feature Enhancement - 13 “ Network Feature Enhancement - 13 Ring tone (Single or Double) as extension call Ext.1001 A/K is needed Ext.2001 Busy 1. Call 2. Ring VoIP-Net 1- Ext.1001 calls Ext.2001 2- Ext.2001 starts ringing. Ver.4.0 : Internal call ring tone. Before Ver.4.0 : External call ring tone. The function works over, Extension Numbering & PBX code Numbering.

Internal call Auto Answer = Enable “ Network Feature Enhancement - 14 Auto Answer A/K is needed Ext.1001 Ext.2001 Busy 1. Call VoIP-Net Internal call Auto Answer = Enable 1- Ext.1001 calls Ext.2001 2- Ext.2001 answers the call automatically. Ver.4.0 : Possible Before Ver. 4.0 : No possible The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 15 “ Network Feature Enhancement - 15 Call-FWD setting on Ext.2001 Ext.1001 A/K is needed Ext.2001 Busy Call PBX-1 VoIP-Net PBX-2 Call Call CO Ext.2002 We can set different C-FWD destination on Ext.2001 for external calls and other PBX call (Internal) calls. E.g. Internal call destination: Call from Ext.1001 and Ext.2002 External call destination: Call from external (Through PBX-1) The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 16 “ Network Feature Enhancement - 16 Pick up call (Direct call pick up) Ext.1001 Ext.2001 3. Pick up 2. Ring VoIP-Net 1.Call 1- Ext.2002 calls Ext.2001 2- Ext.2001 starts ringing. 3- Ext.1001 can pick up the call on Ext.2001 How to program ? Ext.2002 The function works over, Extension Numbering and PBX numbering.

The target PBX numbering plan + * “ Network Feature Enhancement - 17 Pick up call (Direct call pick up): Extension Numbering Ext.1001 Ext.2001 3. Pick up (Press a DSS (20**412001) 2. Ring VoIP-Net 1.Call Access code Ext. No 20**412001 DSS The target PBX numbering plan + * A/K is needed *40 (Pick-up by group number) does not support

Network Feature Enhancement - 18 “ Network Feature Enhancement - 18 Pick up call (Direct call pick up): PBX Numbering Ext.1001 Ext.1001 3. Pick up (Press a DSS (72*411001) 2. Ring PBX code 1 VoIP-Net PBX code 2 1.Call Access code Ext. No 72*411001 TIE access + PBX number DSS A/K is needed

Network Feature Enhancement - 19 “ Network Feature Enhancement - 19 Pick up call (Direct call pick up): CA Ver.3 (Future Plan) Ext.2001 3. Pick up 2. Ring VoIP-Net Ext.1001 1.Call CA Server CA Ver.3 Ext.2002 Monitor A/K is needed

Network Feature Enhancement - 20 “ Network Feature Enhancement - 20 Paging with Pick up call (Direct call pick up) Ext.2001 3. Pick up PBX-1 VoIP-Net PBX-2 Ext.1001 2. Paging Ofiice-1 Ofiice-2 1.Call Ext.2002 is a PBX-2 extension. Audio port Ext.2002 1- Ext.2001 calls Ext.2002 2- On Ext.2002 (Voice Call is available ➔ Paging) 3- Ext.1001 can pick up (72*412002) the call on Ext.2002 A/K is needed

Network Feature Enhancement - 21 “ Network Feature Enhancement - 21 Improved Boss/Secretary function Ext.1001 Ext.2001 Call Ext.1001 VoIP-Net Boss (C-FWD to Ext.2001) Secretary When Ext.2001 calls Ext.1001. Ver.4.0 : Ext.1001 starts ring. Before Ver.4.0 : Busy Tone A/K is needed The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 22 “ Network Feature Enhancement - 22 Internal call Block (COS-COS setting) Call COS Information Call Block VoIP-Net Ext.1001 COS-1 Ext.2001 COS-1 A/K is needed Ext.1002 COS-2 Ext.1001 (COS-1) calls Ext.2001 (COS-1): Not Blocked Ext.1002 (COS-2) calls Ext.2001 (COS-1): Blocked The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 23 “ Network Feature Enhancement - 23 Auto answer enable/disable by COS Ext.2001 Call COS Information VoIP-Net Ext.1001 COS-2 Auto Answer=ON Calling Ext. Ext.2001 Ext.1001 (COS-2) Auto Answer Ext.1002 (COS-3) Ringing A/K is needed Ext.1002 COS-3

Auto answer enable/disable by COS “ Auto answer enable/disable by COS Internal call works this feature Ext.2001 VoIP-Net Ext.1001 Auto Answer=ON Calling Ext. Ext.2001 Ext.2002 (COS-1) Auto Answer Ext.2003 (COS-3) Ringing Ext.1001 (COS-2) Auto Answer Ext.1002 (COS-3) Ringing Ext.1002 Ext.2002 COS-1 Call Ext.2003 COS-3

Network ICD-Group

Network ICD-Group “ Before Ver.4. Ext.2001 CO VoIP-Net Call ICD-Group Ring Virtual PS Ext.1003 C-FWD = 2002

Network ICD-Group “ Ver.4. Ext.2001 CO VoIP-Net Call ICD-Group Ring (Already Supported) UCD (Ver.4) Hunt (Ver.4) Virtual PS Ext.1003 C-FWD = 2002 Note: Automatic Log-out is not support for Virtual PS.

Improved Conference Group Function

Before Ver.4: System Program “ Improved Conference Group Function - 1 Conference Group mode programming Ver.4: Flexible Program Before Ver.4: System Program

Improved Conference Group Function - 2 “ Improved Conference Group Function - 2 Conference Group mode programming (Ver.4) Group-1: 8-Party Conference Mode Owner Two-way One way N/A Group-2: Broadcast Owner Two-way N/A One way Total 32 Terminals Group-8: 8-Party Conference Mode Owner Two-way

Improved Conference Group Function - 3 “ Improved Conference Group Function - 3 Joining external participants Before Ver.4 Owner Conference Group Before a conference is established, the external participant cannot join. Owner Conference Group If an owner wants to have a conference with only external participants. ➔ How to achieve ?

2. Conference is established. “ Improved Conference Group Function - 4 Joining external participants Ver.4 Auto Answer mode works for conference group call on Ver.4. Advise solution Owner Conference Group 3. Join 1. Call 2. Conference is established. 4. Cuts the D-PT. D-PT or Softphone Auto Answer = ON - An owner establishes a group conference with physical connection D-PT or Softphone. - An external participant joins the conference. - The owner presses the DSS button of the D-PT twice. - Press “Flash”/”Recall” key. ➔ Cuts the D-PT from the conference.

Improved Conference Group Function - 5 “ Improved Conference Group Function - 5 Reserve Bit Function (0A-6) This is PSN plan Default (Disable) Owner Conference Group Call Auto Answer = OFF 0A-6=Disable A D-PT (Auto Answer = Off) in conference group: An owner establishes a group conference ➔ Compulsory D-PT Auto answer function Enable. 0A-6=Enable The above function does not work.

Improved Conference Features

Improved Conference Features - 1 “ Improved Conference Features - 1 Before Ver.4 Function Subscriber-A Ext.1001 CO Owner Subscriber-B Three party conference. 1- Ext.1001 (Owner) holds three party conference. Subscriber- A, Subscriber-B 2- Ext.1001 on-hooks ➔ All connection disconnects. Customer wants to keep CO-to-CO connection.

Improved Conference Features - 2 “ Improved Conference Features - 2 Ver.4 New Option CO-CO call Limitation Enable : Default (Before Ver. 4 New function) Disable : Option (Ver. 4 New function)

Improved Conference Features - 3 “ Improved Conference Features - 3 Ver.4 Function (CO-CO call Limitation = Disable) 1. Ext.1001 (Owner) holds three party conference. Subscriber-A Ext.1001 CO Owner Subscriber-B 2. Ext.1001 on-hooks. 3. The PBX is keeping CO-to-CO connection. Subscriber-A Ext.1001 CO Owner Subscriber-B NB: This operation does not work for conference group call.

Improved Conference Features - 4 “ Improved Conference Features - 4 Working scenario Subscriber-A Ext.1001 CO Owner 1- Ext.1001 (Owner) holds three party conference. Subscriber- A and Ext.1002. 2- Ext.1001 on-hooks ➔ The PBX keeps Subscriber- A and Ext.1002 connection. Ext.1002

Improved Conference Features - 5 “ Improved Conference Features - 5 Working scenario Subscriber-A Ext.1001 CO Owner VoIP-Net 1- Ext.1001 (Owner) holds three party conference. Subscriber- A and Ext.1002. 2- Ext.1001 on-hooks ➔ The PBX keeps CO to Ext.1002 call. Ext.1002

Improved Conference Features - 6 “ Improved Conference Features - 6 Working scenario Ext.1001 Owner VoIP-Net Ext.1002 Ext.1003 1- Ext.1001 (Owner) holds three party conference. Ext.1002 and Ext.1003. 2- Ext.1001 on-hooks ➔ The PBX keeps Ext.1002 to Ext.1003 call.

Improved Conference Features - 7 “ Improved Conference Features - 7 Not working scenario Subscriber-A Ext.1001 CO Owner Subscriber-B 1- Ext.1001 (Owner) holds four party conference. Subscriber- A, Subscriber-B and Ext.1002. 2- Ext.1001 on-hooks ➔ All connections disconnect. Ext.1002

(by using auto answer/conference) Paging to DECT (by using auto answer/conference)

3. Speaker automatically ON “ Paging to DECT - 1 Auto-answer function for DECT Ext.2001 Auto-Answer=ON 2. Call 1.Call Ext.2001 Ext.1001 3. Speaker automatically ON 1. Ext.1001 calls Ext.2001 (Auto-Answer=ON) 2. The PBX calls Ext.2001 3. Ext.2001 speaker phone automatically ON. Auto-answer function also works a conference group call.

3. Speaker automatically ON “ Paging to DECT - 2 Auto-answer function for Conference Group Conference Group No.1 Ext.2001 Ext.2002 Ext.2003 2. Call 1.Dial *321# Auto-Answer=ON Ext.1001 4. Paging 3. Speaker automatically ON Ext.1001 holds a conference (*321#) 2. The PBX calls pre-programmed DECT-PS 3. All DECT PS on the conference group automatically answer. Speaker phone automatically “ON”. 4. Ext.1001 user can page.

“ Paging to DECT - 3 Conference Group No.1 Ext.2001 Ext.2002 Ext.2003 Ext.1001 Auto-Answer=ON DECT user and SLT user can make conference group call as well as PT user. - Hand over is supported for conference group call after DECT answers. (Ver. 3 does not support hand over for conference group call.) - One DECT-PS needs one wireless channel. Broadcasting mode Max. member Max. talker When paging starts, Enable → 32 8 DECT-PS cannot speak at first. Disable DECT-PS speak at first.

Paging to DECT - 4 “ Reserve Bit Function (0A-7) This is PSN plan Default (Disable) Owner Conference Group Call Auto Answer = Off 0A-7=Disable A PS (Auto Answer = Off) in conference group: An owner establish a group conference ➔ Compulsory PS Auto answer function Enable. 0A-7=Enable The above function does not work.

Call-FWD CLIP

Call-FWD CLIP - 1 (Internal call) “ Call-FWD CLIP - 1 (Internal call) Subscriber-A CLIP ? Ext.1000 CLIP 477-1000 ISDN Calls 1- Ext.1000 calls Ext.1001 2- The call is re-routed to subscriber-A. 3- CLIP? Ext.1000 CLIP or Ext.1001 CLIP? Ext.1001 CLIP 477-1001 C-FWD to Subscriber-A The PBX sends 477-1001 as CLIP The PBX sends 477-1000 as CLIP

Call-FWD CLIP - 2 (Internal call) “ Call-FWD CLIP - 2 (Internal call) Subscriber-A CLIP ? Ext.1000 CLIP 477-1000 ISDN Calls 1- Ext.1000 calls Ext.6000 (ICG-D) 2- The call is re-routed to subscriber-A. 3- CLIP? Ext.1000 CLIP or Ext.2000 CLIP? ICD-G 6000 Ext.2000 CLIP 477-2000 C-FWD to Subscriber-A Dummy PS Ext.1001 The PBX sends 477-2000 as CLIP The PBX sends 477-1000 as CLIP

Call-FWD CLIP - 3 (External call) “ Call-FWD CLIP - 3 (External call) Subscriber-A Ext.1000 CLIP 477-1000 C-FWD to Subscriber-B ISDN Subscriber-B 1- Subscriber-A calls Ext.1000 2- The call is re-routed to subscriber-B 3- CLIP? Subscriber-A CLIP or Ext.1000 CLIP? The PBX sends 477-1000 as CLIP The PBX sends Subscriber-A CLIP as CLIP

Call-FWD CLIP - 4 (External call) “ Call-FWD CLIP - 4 (External call) ICD-G 6000 Subscriber-A Ext.1000 CLIP 477-1000 ISDN Ext.2000 CLIP 477-1000 C-FWD to Subscriber-B Subscriber-B Dummy PS 1- Subscriber-A calls Ext.6000 (ICG-D) 2- The call is re-routed to subscriber-B 3- CLIP? Subscriber-A CLIP or Ext.2000 CLIP? The PBX sends 477-1000 as CLIP The PBX sends Subscriber-A CLIP as CLIP

Improved Centralized VM Function

Improved Centralized VM function - 1 “ Improved Centralized VM function - 1 VM transfer over network Ext.2001 CO PBX-1 VoIP-Net PBX-2 1. Call 2. Press “VTR + 2001+# 3. Go to Ext. 2001 Mail BOX Ext.1001 Ext.2002 Mail-BOX Ext. 101 1001 (PBX-1) 102 2001 (PBX-2) 103 2002 (PBX-2) Centralized VM 1. Ext.1001 receives a call. 2. Press the “VTR” button and dial remote extension number + #. 3. The call goes to Ext.2001 mail Box.

Improved Centralized VM function - 2 “ Improved Centralized VM function - 2 VM transfer over network 2. Press “VTR + 1001 + # Ext.2001 CO PBX-1 VoIP-Net PBX-2 1. Call 3. Go to Ext. 1001 Mail BOX Ext.1001 Ext.2002 Mail-BOX Ext. 101 1001 (PBX-1) 102 2001 (PBX-2) 103 2002 (PBX-2) Centralized VM 1. Ext.2001 receives a call. 2. Press the “VTR” button and dial remote extension number + #. 3. The call goes to Ext.1001 mail Box.

Improved Centralized VM function - 3 “ Improved Centralized VM function - 3 VM transfer over network 2. Press “VTR + NDSS Button Ext.2001 CO PBX-1 VoIP-Net PBX-2 1. Call NDSS (Ext.1001) 3. Go to Ext. 1001 Mail BOX Ext.1001 Ext.2002 Mail-BOX Ext. 101 1001 (PBX-1) 102 2001 (PBX-2) 103 2002 (PBX-2) Centralized VM 1. Ext.2001 receives a call. 2. Press the “VTR” button and Press the NDSS button for Ext.1001. 3. The call goes to Ext.1001 mail Box.

Improved Centralized VM function - 4 “ Improved Centralized VM function - 4 Transfer re-call Destination Ext.2001 CO PBX-1 VoIP-Net PBX-2 1. Call Centralized VM 2. Transfer to Ext.1002 Un-screened Ext.1001 3. Does not answer Mail-BOX Ext. 101 1001 (PBX-1) 102 1002 (PBX-1) 103 2001 (PBX-2) Ext.1002 C-FWD N/A to VM Step 4. Before Ver.4 Transfer re-call to Ext.1001 Ver.4 The call is re-routed to the Centralized VM

Improved Call-FWD N/A Function

Improved Call-FWD N/A Function - 1 “ Improved Call-FWD N/A Function - 1 C-FWD N/A function before Ver.4 Ext.2001 Subscriber-A 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15sec CO 3. Fwd to Subscriber-A 1. Call 1. Ext.2002 calls Ext.2001 2. Ext.2001 starts ringing, 15sec. 3. The call is forwarded to the subscriber-A ➔ Ext.2001 stops ringing. Ext.2002

Improved Call-FWD N/A Function - 2 “ Improved Call-FWD N/A Function - 2 C-FWD N/A function Ver.4 Ext.2001 Subscriber-A 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15sec CO 3. Fwd to Subscriber-A 1. Call 1. Ext.2002 calls Ext.2001 2. Ext.2001 starts ringing, 15sec. 3. The call is forwarded to the subscriber-A Keep ring after FWD NA to CO Enable ➔ Ext.2001 keeps ringing. Disable ➔ Ext.2001 stops ringing. 4. The subscriber-A and Ext.2001 can answer the call. A/K is needed Ext.2002

Improved Call-FWD N/A Function - 3 “ Improved Call-FWD N/A Function - 3 C-FWD N/A function Ver.4 Ext.2001 Subscriber-A 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15sec CO 3. Fwd to Subscriber-A 1. Call The Keep ring after FWD NA to CO Function is available on the following CO CO Type Available SIP/H.323 G/W YES ISDN Analogue W/ Reverse W/O Reverse NO CPC Analogue Line E1 T1 LCO GCO/DID/E&M Ext.2002

Improved Call-FWD N/A Function - 4 “ Improved Call-FWD N/A Function - 4 C-FWD N/A function Ver.4 Ext.2001 Subscriber-A 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15sec CO 3. Fwd to Subscriber-A 1. Call Ext.2001 If Ext.2001 DSS is assigned on other Ext. 1. Ext.2002 calls Ext.2001 ➔ DSS flashing. 2. 15 sec ➔ DSS flashing. 3. The call is forwarded to the Subscriber. 4. The Subscriber does not answer ➔ DSS flashing. 5. The Subscriber answers ➔ DSS turns “Red”. Ext.2002 This situation differs from the usual DSS display. Actually, Ext.2001 is not busy, other extension can call to Ext.2001.

Improved Call-FWD N/A Function - 5 “ Improved Call-FWD N/A Function - 5 C-FWD N/A function Ver.4 Ext.2001 2. Ring. Call-FWD N/A Ext.2003 N/A Timer=15sec If Ext.2001 is set C-FWD to Internal. 1. Call 1. Ext.2002 calls Ext.2001 2. Ext.2001 starts ringing, 15sec. 3. The call is forwarded to Ext.2003 4. Ext.2001 stops ringing. Ext.2002 3. Fwd to Ext.2003 Ext.2003

Improved CA integration

Improved CA integration “ Improved CA integration Send system data to CA When CA user logs to PBX (Ver.4), the PBX send “Manager” and “CA Chat Ability” information to CA. 2. Data 1. Log-in CA Client-1 Disable manager function from basic CA client Disable un-necessary chat Support from CA Ver.3

Improved CA integration “ Improved CA integration Absent Message is not automatically changed. Before Ver.4 Absent status is displayed automatically by CA when PC is not used for pre programmed time. Not in used CA Display changed Customer does not like this change. 10 JUN. 09:40 THU THU 09:40 - * PROG INFO RING MENU PROG INFO RING MENU Ver.4 Absent status is not displayed from Ver.4.

Alternative call if VoIP call is fails (CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call)

Alternative call if VoIP call fails - 1 “ Alternative call if VoIP call fails - 1 Standalone system +44 (0)111-2222 Telephone cost are high. PBX-Japan NTT-CO BT CO Dials 0-00-44-111-2222 0-00-44-111-2222 Subscriber No. Country code International access code CO access code

Alternative call if VoIP call fails - 2 “ Alternative call if VoIP call fails - 2 Using remote PBX and VoIP and ARS function +44 (0)111-2222 Save cost !!! PBX-Japan NTT-CO BT CO ARS=ON 01112222 TG-2 VoIP Net 80201112222 PBX-UK Modify the dialled number by ARS table. Dials 0-00-44-111-2222

Alternative call if VoIP call fails - 3 “ Alternative call if VoIP call fails - 3 Using remote PBX and VoIP and ARS function +44 (0)111-2222 If VoIP Network is Down ? PBX-Japan NTT-CO BT CO ARS=ON TG-2 VoIP Net = Down 80201112222 PBX-UK Modify the dialled number by ARS table. Dials 0-00-44-111-2222

Checks Quick Dialling table “ Alternative call if VoIP call fails - 4 Using remote PBX and VoIP and ARS function +44 (0)111-2222 Modify the dialled number by Quick Dial table. A new function from Ver.4. PBX-Japan NTT-CO BT CO ARS=ON 801-00-44-111-2222 No-response TG-2 VoIP Net = Down 80201112222 PBX-UK Modify the dialled number by ARS table. The call is VoIP call ? Dials 0-00-44-111-2222 Checks Quick Dialling table NO YES Re-order Tone

Modify the dialled number by ARS table. “ Alternative call if VoIP call fails - 5 Programming ARS Select “On for Local Access Operation” Please do not select “On for any CO Access Operation” Modify the dialled number by ARS table.

Alternative call if VoIP call is failed - 6 “ Alternative call if VoIP call is failed - 6 Programming Quick Dial Need to Check Trunk access No. CO access No.

Alternative call if VoIP call fails - 7 “ Alternative call if VoIP call fails - 7 Reserve Bit Function (09-6) From TDE/NCP V4. Default (Disable) The alternative call function on Ver.4. CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call 09-6=Disable The alternative call function works. CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call 09-6=Enable The alternative call function does not work. CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ Re-order tone

Improve VoIP (H.323) Connection

Improve VoIP (H.323) Connection - 1 “ Improve VoIP (H.323) Connection - 1 Support Non-Fast Connect H323 IP-G/W Virtual H323 IP-G/W Call VoIP Net Call Receiving call (a non-Fast connect mode call): Before Ver.4 : PBX does not accept the call. Ver.4 : PBX accepts the call. This improvement is adapted only for virtual gate way. (Not for LPR card gate way)

Improve VoIP (H.323) Connection - 2 “ Improve VoIP (H.323) Connection - 2 Support Non-Fast Connect H323 IP-G/W Virtual H323 IP-G/W Call VoIP Net 2. Reply 1. Call 3. Connection? Making call: The TDE/NCP makes a call with fast connection mode. The other PBX replies with non fast connection mode. Before Ver.4 : PBX does not accept this reply, disconnect the call. Ver.4 : PBX accepts this reply This improvement is adapted only for virtual gate way. (Not for LPR card gate way)

Improve VoIP (H.323) Connection - 3 “ Improve VoIP (H.323) Connection - 3 Support Non-Fast Connect H323 IP-G/W Virtual H323 IP-G/W Call VoIP Net 2. Reply 1. Call 3. H.245 Negotiation Making call: The TDE/NCP makes a call with fast connection mode. The other PBX replies with non fast connection mode. Before Ver.4 : PBX does not accept this reply, disconnect the call. Ver.4 : Support H.245 Negotiation. This improvement is adapted only for virtual gate way. (Not for LPR card gate way)

Improve VoIP (H.323) Connection - 4 “ Improve VoIP (H.323) Connection - 4 Reserve Bit Function (06-0): H323-ID registration Default (Disable) Gate Keeper Registration H323 G/W LAN 06-0=Disable The H323-ID registration is not possible. 06-0=Enable The H323-ID registration is possible. (TDE Ver.2) The PBX send “Zonename” information to the Gate keeper. (Ver.4) The PBX send “Band Wide” information to the Gate keeper. (Ver.4)

Other Improvements

Other Improvements “ BSS Operation Programming Before Ver.4 (System Program) Ver.4 (COS setting) Ext.1001 (Operator: COS-1) Mainly un-screened call transfer. Ext.1002 (Worker: COS-2) Mainly screened call transfer.

PC Maintenance Console (PCMC) for Ver.4.

PCMC for KX-TDE/NCP Ver.4. “ PCMC for KX-TDE/NCP Ver.4. Please use U-PCMC Ver. 6.x.x.x KX-TDE600 Ver. 6.0.x.x or later KX-NCP500/1000 Ver. 6.1.x.x or later KX-TDE100/200 Ver. 6.2.x.x or later

Thank You Very Much For Your Attention

Modification History ➔ Edition-2 Page-11 Page 72 TVR ➔ VTR Add Page 79 Page 81 CS ➔ CA Page 14 Page 34 Ext.2001 ➔ Ext.2002 Page 39 72*412001 ➔ 72*412002 Page 58 CO-to-CO call ➔ CO to Ext.1002 call. Page 59 CO-to-CO call ➔ Ext.1002 to Ext.1003 call. Page106 4. Ext.2003 does not answer the call and the call is re-routed to VM. ➔ The call is re-routed to VM. ➔ Edition-4 Add Page 73. ５

➔ Edition-5 Page-51 : (Old) - The owner presses the DSS button of the D-PT. (New) - The owner presses the DSS button of the D-PT twice. - Press "Flash"/"Recall" key. Page-55 : (Old) CO-CO call Limitation Enable : Default (Ver. 4 New function) Disable : Option (Before Ver. 4 New function) (New) CO-CO call Limitation Enable : Default (Before Ver. 4 New function) Disable : Option (Ver. 4 New function) Page-56: (Old) Ver.4 Function (CO-CO call Limitation = Enable) (New) Ver.4 Function (CO-CO call Limitation = Disable) Page-72 : (Old) 2. Press “VTR + 2001 ➔ (New) 2. Press “VTR + 2001+# Page-74 : Add. Page-81 : (Old) If Ext.2001 is set C-FWD to External. (New) If Ext.2001 is set C-FWD to Internal. ➔ Edition-6 Page-2, 20-26,30-34, 36-39, 41-42. Add: A/K is needed ➔ Edition-7 Page-40 Add: A/K is needed