SSSC 2011

Light, Functional and Easy Using the GeoXH as a Base Station A Setup Guide

But What is a Base Station Any GNSS receiver that records to file constellation variances that can be used to post process rover data. Traditional Bases station

Example of NZ’s COR network

Why would you use a mapping unit? Where you need a position better than autonomous GPS No local base station is available Where the baseline is greater than 300km Where RTK precision is not needed Where realtime positioning is not a requirement Example Creating control for photo rectification Mapping services in remote Islands Vegetation mapping on remote islands Faster Access to PP data – Eg Staight away You don’t have access to free data

What do you need? GeoXH TerraSync Pro Optional Pole with Geo Clamp Bipod Tornado antenna This is not an option for users using Arcpad with GPS Correct extension

How? Change File type to Base Default name is Base followed by reverse date/ time

Selecting Antenna and Logging options Enter the correct antenna height Select the type of antenna 5sec logging is fine for base files

Position If setting up over a know mark enter coordinates Use the Here button if location is unknown

Start Session

Option Tab and File transfer