Infrared Spectrometry Instrumental Analysis Chapter 17.

Slides:



Advertisements
Similar presentations
Sample Preparation – IR spectroscopy
Advertisements

Infrared Spectroscopy A.Why are we doing this experiment? 1)Infrared spectra tell us only a limited amount about a transition metal complex 2)In very simple.
Applications of IR spectroscopy
FLAME SPECTROSCOPY The concentration of an element in a solution is determined by measuring the absorption, emission or fluorescence of electromagnetic.
Application of Infrared Spectroscopy Chapter 17
Molecular Fluorescence Spectroscopy
427 PHC. Introduction  Spectrometric methods are a large group of analytical methods that are based on atomic and molecular spectroscopy.  Spectroscopy.
Atomic Emission Spectroscopy
Spectrophotometry Chapter 17, Harris
Chapter 17 Applications of Infrared Spectrometry Infrared spectrometry is applied to the qualitative and quantitative determination of molecular species.
Lecture 6. FT-IR and Raman Spectroscopy. FT-IR Analytical infrared studies are based on the absorption or reflection of the electromagnetic radiation.
Spectroscopy Chapter 7.
Spectrophotometric Analysis
Infrared Radiation 780 nm m Near, Mid and Far
Introduction to Spectrophotometry
Introduction to Infrared Spectroscopy
Lecture 3 INFRARED SPECTROMETRY
Introduction and Applications of Infrared Spectrometry
IR – Infrared Spectroscopy. What is IR Spectroscopy? Infrared spectroscopy is the analysis of infrared light interacting with a molecule. IR spectroscopy.
Introduction to Instrumental Analysis - Spectrophotometry
Understanding infrared spectroscopy
Common types of spectroscopy
 PART Requirements for Spectroscopic Techniques for Polymers 1. High resolution 2. High sensitivity (>1%) 3. High selectivity between molecular.
© 2010 Pearson Education, Inc. Light and Matter: Reading Messages from the Cosmos.
Physical and Chemical Tests 10-1 Purification: Chromatography Distillation Recrystallization Comparison to known compounds: Melting point Boiling point.
1 University of Petra Faculty of Science & Arts Department of Chemistry Seminar I.R Spectroscopy By Firas Al-ouzeh Supervisor : Nuha I. Swidan Summer 2007.
Spectroscopy.  Spectroscopy is the study of the interaction of electromagnetic radiation with matter. There are many forms of spectroscopy, each contributing.
Pharmacy 325 Infrared (IR) Spectroscopy Dr. David Wishart Rm Ph Hours: anytime after 4 pm.
INFRA RED ABSORPTION SPECTROSCOPY Kateřina Hynštová.
1.1 Introduction Energy of IR photon Near IR 12, cm -1 Mid IR cm -1 Far IR cm -1 Energy of IR photons insufficient to cause.
Advanced Spectroscopy 3. Infrared Spectroscopy. Revision 1.What molecular or structural features give rise to absorption of infrared (IR) radiation? covalent.
Introduction to Spectrochemical Methods
UV-Vis Absorption Spectroscopy
Infrared Spectroscopy
Colorimetry & Spectrophotometry
(IR spectroscopy) is the subset of spectroscopy that deals with the infrared region of the electromagnetic spectrum. spectroscopy infraredelectromagnetic.
Fluorescence Spectroscopy
Spectrophotometry.
Chapter 6 An Introduction to Spectrometric Methods Spectrometric methods are a large group of analytical methods that are based on atomic and molecular.
11.3: Analytical techniques can be used to determine the structure of a compound, analyze the composition of a substance, or determine the purity of a.
Asa Arjoon U6 Chemistry Presentation on Visible and Ultraviolet Spectroscopy Name : Form : Subject :
Introduction to Spectrochemical Methods
Spectroscopy Measures light (radiation) absorbed by species in solution. Some radiation is absorbed by ground state electrons in atoms or molecules. Radiation.
INFRARED SPECTROSCOPY
Infrared Spectroscopy
1 Atomic Emission Spectroscopy Molecular Absorption Spectroscopy Lecture 21.
Infrared Spectroscopy
UV SPECTROSCOPY Absorption spectra.
Summary: (Last lecture) Absorption spectroscopy definition electromagnetic spectroscopy matter absorption spectroscopy fundamental terms (transmittance,
1 Increasing frequency CH 2 =CH-CH=CH 2 Absorption spectrum for 1,3-butadiene.
Spectrophotometry at a Glance
 FT-IR stands for Fourier Transform Infrared, the preferred method of infrared spectroscopy. In infrared spectroscopy, IR radiation is passed through.
Infrared Spectroscopy: Comparison of Transmission and ATR Techniques Matt Herring Lewis University.
Applications of UV-Vis Spectroscopy
UV/VIS SPECTROSCOPY.
Laboratory equipment Lecture (4).
Spectroscopy Chapter 7.
Introduction to Spectrophotometry
Spectrophotometer Dr . S. Jayakumar.
Infrared Spectroscopy
UV SPECTROSCOPY Absorption spectra.
Introduction and Principle of IR Spectrophotometry
UV-VISIBLE SPECTROSCOPY Dr. R. P. Chavan Head, Department of Chemistry
Analytical methods Prepared By Dr. Biswajit Saha.
Fourier Transformation Infra-red
Chapter 17 Applications of Infrared Spectrometry
SPECTROPHOTOMETRY Applied Chemistry.
FLAME SPECTROSCOPY The concentration of an element in a solution is determined by measuring the absorption, emission or fluorescence of electromagnetic.
Spectrophotometric Analysis
Presentation transcript:

Infrared Spectrometry Instrumental Analysis Chapter 17

Applications of Infrared Spectrometry Modern infrared spectrometry is a versatile tool that is applied to the qualitative and quantitative determination of molecular species of all types. The applications of infrared spectrometry can be split into three main areas: Near-infrared – 4,000 to 14,000 cm -1 Mid-infrared – 670 to 4,000 cm -1 Far- infrared – less than 670 cm -1

Chart on Regions Spectral RegionsType MeasurementType AnalysisType Samples Near-infraredDiffuse Reflectance Absorption Quantitative Solid, Liquid Gaseous Mixtures Mid-infraredAbsorption Reflectance Emission Qualitative Quantitative Chromatographic Qualitative Quantitative Solid, liquid, gas Pure solid or liquid Atmospheric sample Far-infraredAbsorptionQualitativePure inorganic or metal organic

Gas in an Evacuated Cylinder The spectrum of a low-boiling liquid or gas can be obtained by permitting the sample to expand into an evacuated cylindrical cell equipped with suitable windows. A variety of cylindrical cells are available with path lengths that that range from a couple of centimeters to 10 meters or more. The longer the path lengths are obtained in compact cells by providing reflecting internal surfaces, so that the beam makes numerous passes through the sample before exiting the cell.

Solutions When feasible, a convenient way of obtaining infrared spectra is on solutions prepared to contain a known concentration of sample, as is generally done in ultraviolet/visible spectroscopy. This technique is limited due to the availability of solvents that are transparent over significant regions in the infrared.

Dissolved in Solvents There is no particular solvent that is completely transparent in the entire mid-infrared region. Therefore solvents are chosen on the basis of the region the sample will absorb. Water and alcohol are used seldom because they absorb strongly and they attack alkali metal halides, the most common materials used for cell windows. The alkali metals are the most common metals used in cell windows.

Liquid in Cell Because of the tendency for solvents to absorb, infrared cells are ordinarily much narrower than those employed in the UV/Vis regions. Fixed path length cells can be filled or emptied with a hypodermic syringe. Sodium Chloride windows are widely used because their surfaces. A common problem with sodium chloride cells is that they absorb moisture and become fogged. To get rid of the fogginess one has to polish the window with a buffing powder returns them to their original condition.

Demountable Liquid Cell The cells are frequently demountable, with Teflon spacers to allow for variation in path length. The thickness, b, of very narrow infrared cells can be determined. The maxima occur when the radiation reflected off of the two internal surfaces of the cell has traveled a distance that is an integral multiple, N, of the wavelength of the radiation that was transmitted with out reflection: 2b/N =

Pellets One of the most popular techniques for handling solid samples has been KBr pelleting. In using this technique, a milligram or less of the finely ground sample is ultimately mixed with about 100 mg of dried potassium bromide powder. Halide salts have the property of cold flow in which they have glass like transparent or translucent properties when sufficient pressure is applied to the finely powdered materials. With many compounds KBr pelleting produces excellent spectra that appear in many spectral libraries.

Pellets (cont) The KBr pelleting system is designed to allow the spectroscopist to position a KBr die in the laboratory press without the need to continually connect or disconnect a vacuum tube from an external vacuum pump when samples are processed.

Mulls Mulls are formed by grinding 2 to 5 mg of the finely powdered sample in the presence of one or two drops of a heavy hydrocarbon oil (Nujol). If hydrocarbon bands are likely to interfere, fluorolube, a halogenated polymer can be used instead. The disadvantage of Nujol is that hydrocarbon bands may interfere with analyte absorbances. A second method of forming a mull involves grinding the powdered analyte with dry potassium bromide and forming a disk. The ratio of analyte to potassium bromide is usually about 1:100. The materials are ground together using a mortar and pestle or a small ball mill. The mixture is then pressed in a die at 10,000–15,000 psi to form a small transparent disk and analyzed. Care must be taken when preparing the disk to protect it from moisture. It is very common to see absorbencies for moisture when using potassium bromide disks.

Mid-Infrared Absorption Spectrometry Mid-infrared absorption and reflection spectrometry are major tools for determining the structure of organic and biochemical species. Mid- infrared light ( µm, cm -1 See Diagram Below) is energetic enough to excite molecular vibrations to higher energy levels. The wavelength of many IR absorption bands are characteristic of specific types of chemical bonds, and IR spectroscopy finds its greatest utility for qualitative analysis of organic and organometallic molecules. IR spectroscopy is used to confirm the identity of a particular compound and as a tool to help determine the structure of a newly synthesized molecule (with NMR spectroscopy and mass spectrometry).

Absorption Spectrometry The visible region of the electromagnetic spectrum consists of photons with wavelengths from approximately 400 to 700 nm. The short wavelength cutoff is due to absorption by the lens of the eye and the long wavelength cutoff is due to the decrease in sensitivity of the photoreceptors in the retina for longer wavelengths. Light at wavelengths longer than 700 nm can be seen if the light source is intense.

Electromagnetic Spectrum Type of RadiationFrequency Range (Hz)Wavelength RangeType of Transition gamma-rays <1 pmnuclear X-rays nm-1 pminner electron ultraviolet nm-1 nmouter electron visible4-7.5x nm-400 nmouter electron near-infrared1x x µm-750 nmouter electron molecular vibrations infrared µm-2.5 µmmolecular vibrations microwaves3x mm-25 µmmolecular rotations, electron spin flips* radio waves<3x10 11 >1 mmnuclear spin flips*

Qualitative Analysis The mid-infrared region is further broken down into the group frequency region (1,280 to 5,000 cm -1 ) and the fingerprint region (670 to 1,280 cm -1 ). Since most organic molecules have single bonds, the region below 1500 cm -1 can become quite complex and is often referred to as the 'fingerprint region'. If you are dealing with an unknown molecule which has the same 'fingerprint' in this region, that is considered evidence that the two molecules may be identical. The fingerprint region is useful because small differences in the structure and constitution of a molecule result in significant changes in the appearance and distribution of absorption peaks in this region. A close match between two spectra in the fingerprint region constitutes almost certain evidence for the identity of the compounds yielding the spectra.

Quantitative Analysis The use of highly concentrated solutions (not necessarily highly concentrated in the absorber). Poor monochromaticity of the radiation beam. "Stray light" within the instrument. Changes in chemical speciation. Quantitative infrared absorption methods differ somewhat from UV/VIS molecular spectroscopic methods because of the greater complexity of the spectra, the narrowness of the absorption bands, and the instrumental limitations of infrared instruments.

Quantitative Analysis Even when there is full confidence that Beer's Law can be applied, there are random errors in absorbance measurements to be considered. Random instrumental errors arise primarily from electronic noise and, hence, vary somewhat with instrument design. A useful rule of thumb for absorbance measurements is to keep measured A values within the range Some modern instruments give optimum precision near A = 1.5 but it is always best to avoid measuring below A = 0.1 (small difference between large numbers) or above A = 2.0 (where only 1% of light is transmitted and stray light becomes important).

References Chem Center - Powered by ACS Science Magazine