Steps Towards Advance Technology “LPS, GIS & SMS SYSTEM” ( LPS = Loading Point System GIS=Geographical Information System SMS = Short Message Service) By: Manzoor Hussain Malik Senior Vice President (Agri.) Shakarganj Mills Limited
We are using advance technologies like LPS, GIS and SMS in Shakarganj Mills. LPS System is used at Check Posts to identify the Sugarcane Loaded Vehicle with GPS Position. GIS System is used for Grower Wise Survey with Field Pictures and GPS position. SMS System is used to check the Current Yard Balance, Crushing & Recovery etc.
HOW LPS WORK Following technologies are required for this system :- 1. GSM – Group Special Mobile (Telenor) 2. GPS – Global Positioning System 3. GPRS – General Packet Radio Service (Mobile Internet) 4. Java Supported Symbian Mobile (Nokia C5-03)
HOW LPS WORK Following Items must be checked before the start of Software :- 1. Time/Date must be correct 2. Operator Signals must be available 3. Mobile Internet must be enabled on SIM 4. Mobile must be configured for Internet
SOFTWARE FUNCTIONS FOR LPS & GIS SYSTEM LPS & GIS SYSTEM New Registration Check Registration Configuration 0 Pending Photos Powered by Shakarganj Feedback of submitted record To submit new record To define Company and Area Captured Images waiting to Upload
Snap of Vehicle Registration These snaps are taken at Check Post and Send to SML Server through Software with a unique code.
Snap of Vehicle with Driver
Snaps of Vehicle
Verification The snaps and unique code are verified at Token-I
Verification The snaps and unique code are verified at Token-I
SNAPING PROCESS STEP-1: Identification Image-1 : Data of Board
SNAPING PROCESS STEP-1: Identification Image-2 : Grower or CNIC Image
SNAPING PROCESS STEP-1: Identification Image-3 : Growers Home Image
SNAPING PROCESS STEP-2: Field Side - I Image-1 : Data of Board
SNAPING PROCESS STEP-2: Field Side - I Image-2 : Field Close
SNAPING PROCESS STEP-2: Field Side - I Image-3 : Field Overall
SNAPING PROCESS STEP-3: Field Side - II Image-1 : Data of Board
SNAPING PROCESS STEP-3: Field Side - II Image-2 : Field 2 nd Side Close
SNAPING PROCESS STEP-3: Field Side - II Image-3 : Field 2 nd Side Overall
SNAPING PROCESS STEP-4,5,6: If needed (Separate Site) Image-1 : Data of Board Image-2 : Field Close Image-3 : Field Overall (Repeat step 3)
Complete Set of Pictures with Relevant Data
GEOGRAPHICAL LOCATION OF GROWER Sugarcane Plot Marked
A GSM modem is a specialized type of modem which accepts a SIM card, and operates over a subscription to a mobile operator, just like a mobile phone. A Subscriber identification module (SIM) is used with GSM Modem to Send and Receive SMS. Following Equipments are required for SMS System
SENDING TEXT MESSAGE At your Cell Phone, write text message with the given Codes and send to Specific Number To: Text: Balance
RECEIVING TEXT MESSAGE System will automatically read the message and send back required information after verification of Sender Number. From: Text: Yard Balance = 258 Crushing = 9,750 Recovery = 9.73