MEMSCAP/Mentor Graphics MEMS Solution: A Partnership Model Major Features: Mixed Technology Solution MEMS Intellectual Properties Access to MEMSCAP expertise and Intellectual Properties (IP) in the Micro-Electro-Mechanical System (MEMS) technologies Support for Mentor Graphics proven Mixed- Signal Design and Layout tools Access to the main MEMS foundries Model Generation Tools and Services System and Component Engineers Design Flows Dedicated support infrastructure from MEMSCAP and Mentor Graphics Mentor Graphics Corporation offers a full range of Analog and Mixed Signal Solution into an integrated design environment such as AccuSimII™/Eldo™ and Continuum™. Applied to Telecommunication, Automotive or Aerospace and Biomedical system design, Mentor Graphics design solution enables system designers to fully leverage MEMS component behavioral models in HDL-A™ (soon into VHDL- AMS and Verilog-A standards) for system-level verification and manufacturability analysis with Opsim™/Aspire™. To extend this A/M-S simulation design flow, a complete physical design and extraction solution with ICstation™ and Calibre™/Xcalibre™ with parameterized layout generators of MEMS specific structures provide the productivity required for advanced products development. MEMSCAP main area of business is the design and development of MEMS technology products (software and hardware). The company offers comprehensive solutions for system designers to fully leverage MEMS components for integration of new and more competitive functions within their systems, predominantly by providing customized and technology specific MEMS Engineering Kits, Model Generation Tools and Services and MEMS Intellectual Properties. MEMSCAP’s mission is to bridge the gap between foundries and EDA vendors to enable a full and low cost solution from concept to silicon.

Mixed Technology / MEMS Design Flow VHDL/Verilog and HDL-A support for mixed-signal electronic modeling HDL-A modeling of MEMS components Continuum mixed-signal, multi-level, multi-technology, multi-disciplinary simulation environment ICStation layout environment supports schematic driven layout, place & route and layout verification Opsim and Aspire optimization and manufacturing yield management tools Dedicated MEMS Library and Process support HDL-A simulation models for MEMS devices Technology specific layout generators for mechanical structures Parameterized design rules for DRC and LVS of MEMS Support for Bulk and Surface Micromachining Link to field solvers: FEM/BEM to HDL-A Translator Etching verification and cross-section viewer The Most Effective Link to the MEMS Foundries CMP-Supported MEMS Technologies MCNC Multi-User MEMS Processes (MUMPs) AMS, Bosch and SensoNor Microsystem Technologies - Very Soon - For further information, contact : Corporate Headquaters Mentor Graphics Corporation 8005 S.w. Boeckman Road Wilsonville, Oregon U.S.A. Phone: Fax: MEMS Engineering Kit Features MENTOR GRAPHICS TOOLS Simulation Model Layout Generators MEMS Design Rules Cross-Section Viewer Etching Verification Link to Field Solvers Opsim™ Aspire™ OPTIMIZATION/YIELD MANAGEMENT Continuum™ AccuSimII™ QuickSimII™ QuickHDL™ VHDL/HDL-A™/Schematics ICStation™ ICBlocks™/AutoCells™ ICVerify™ Calibre™/Xcalibre™ ELECTRO-MECHANICAL MODELING MIXED-SIGNAL SIMULATION PHYSICAL LAYOUT MEMS ENGINEERING KIT MEMSCAP 155/157, Cours Berriat Grenoble Cedex 1 FRANCE Phone: Fax: MEMS Devices Manufactured on the MUMPs technology