What makes the Manufactured Goods What makes the Manufactured Goods

Flow Chart Symbols Operation - Object is changed in its chemical or physical makeup. It is assembled or disassembled. Operation - Object is changed in its chemical or physical makeup. It is assembled or disassembled. Transportation – Object is moved from one place to another Transportation – Object is moved from one place to another Inspection – Quality of the object is inspected Inspection – Quality of the object is inspected Delay – Object is held awaiting the next operation Delay – Object is held awaiting the next operation Storage – Object is placed in a protected location Storage – Object is placed in a protected location

The Clipboard Flow Chart Cut plastic to rough width

The Table Saw Purpose: Used to rip or cut stock to width Used to rip or cut stock to width Use for our product: Used to cut the rough width of the plastic Used to cut the rough width of the plastic

The Clipboard Flow Chart Cut plastic to rough width Cut plastic to rough length

The Compound Miter Saw Purpose: Used cut materials to length and width Used cut materials to length and width Use for our product: Used to cut the rough length of the plastic Used to cut the rough length of the plastic

The Clipboard Flow Chart Cut plastic to rough width Cut plastic to rough length Trim to actual size

The Jointer Purpose: Used to join edges or square stock Used to join edges or square stock Use for our product: Used to trim edges to actual size Used to trim edges to actual size

The Clipboard Flow Chart Cut plastic to rough width Cut plastic to rough length Trim to actual size Drill holes for the clip

The Drill Press Purpose: Used to drill holes Used to drill holes Use for our product: Used to drill holes for the clip Used to drill holes for the clip

The Clipboard Flow Chart Cut plastic to rough width Cut plastic to rough length Trim to actual size Cut corners to round Drill holes for the clip

The Corner Rounder Purpose: Cut round corners of material Cut round corners of material Use for our product: Used to cut the round corners of the clip board Used to cut the round corners of the clip board

The Clipboard Flow Chart Cut plastic to rough width Cut plastic to rough length Trim to actual size Cut corners to round Put on the clip Drill holes for the clip

The Pop Rivet Gun Purpose: Attach objects by using rivets Attach objects by using rivets Use for our product: Used to attach the clip to the board Used to attach the clip to the board

1. Identify the Pop Rivet Gun. A A B B C C F F D D E E

2. Identify the Compound Miter Saw. A A B B C C F F D D E E

3. Identify the Drill Press. A A B B C C F F D D E E

4. Identify the Corner Rounder. A A B B C C F F D D E E

5. Identify the Table Saw. A A B B C C F F D D E E

6. Identify the Jointer. A A B B C C F F D D E E

7. What is the operation of the Pop Rivet Gun? A. Used to rip or cut stock to width B. Used to cut the corners C. Used to drill holes D. Used to hold things together using rivets E. Used to cut material to length F. Used to join edges or square stock

8. What is the operation of the Jointer? A. Used to rip or cut stock to width B. Used to cut the corners C. Used to drill holes D. Used to hold things together using rivets E. Used to cut material to length F. Used to join edges or square stock

9. What is the operation of the Table Saw? A. Used to rip or cut stock to width B. Used to cut the corners C. Used to drill holes D. Used to hold things together using rivets E. Used to cut material to length F. Used to join edges or square stock

10. What is the operation of the Corner Rounder? A. Used to rip or cut stock to width B. Used to cut the corners C. Used to drill holes D. Used to hold things together using rivets E. Used to cut material to length F. Used to join edges or square stock

11. What is the operation of the Drill Press? A. Used to rip or cut stock to width B. Used to cut the corners C. Used to drill holes D. Used to hold things together using rivets E. Used to cut material to length F. Used to join edges or square stock

12. What is the operation of the Compound Miter Saw? A. Used to rip or cut stock to width B. Used to cut the corners C. Used to drill holes D. Used to hold things together using rivets E. Used to cut material to length F. Used to join edges or square stock