How to Install a Printer
To Begin From the Startmenu, choose settings then go to Printers.
Once in Printer Folder Click on Add Printer
Printer Wizard Click Next
Local or Network Printer Select Local Printer Make sure to uncheck this box Click Next when finished
The Printer Port Choose Use the following port The LPT1 works for most local printers Click Next
Select Printer Choose the brand of printer - here it is HP Then you need to select the printer - if not listed choose the closest one or select have disk which will help in printer selection Click Next
Drivers You want to use the existing driver Click Next
Name Your Printer You may name your printer whatever you want Use this printer as the default Click Next
Printer Sharing Do not share printer Click Next
Test Page Make sure you print a test page to see if your printer works Click Next
Finish Adding Your Printer Click Finish
Printer Installation Complete Your test page should print by this point, if so, click Ok. If it didnt, click on Troubleshoot.
Successful Completion If all steps were followed, then you should have a working computer!!! Congratulations!!!