KRYSTALINE FUEL INITIATOR

WHAT IS KRYSTALINE? Krystaline Fuel Initiator (KFI) works on energetic principles, not chemicals. Adding KFI to your oil and fuel will allow it to restructure the molecules in your engine and fuel to burn at an organized rate.

CAN KFI HARM YOUR ENGINE? ANSWER: NO! Most vehicles owners manuals indicate that levels from 5% to 85% ethanol are compatible with today’s engines. KFI works on energetic principles- ethanol is the “carrier” for the transfer of energy. This energy then structures the fuel so that it burns more completely. Ethanol was chosen as the carrier since it is already widely used in fuel. The dilution ratio of KFI to fuel is 1:25,000, which works out to 0.004%. Therefore, is well below any level of concern.

How To Use Krystaline Fuel Initiator Add ½ Dropper (1cc) for each 20 liters of fuel in your tank Add 2 cc's to engine oil initially and again with every oil change

BENEFITS OF KFI Greatly Reduces Emissions Increases Mileage by 10%-40%. TYPICALLY 30% Increases Horsepower Cleans Spark Plugs & Combustion Chambers Smoother Running Engines – Especially Diesel Decreases engine noise & vibration Engine is easier to start Works on Gas, Diesel and 2 Cycle Engines

SAVINGS One 30ml Bottle Treats 150 gal/600 litres of fuel. ½ Dropper Treats 5 gal/20 litres A Typical 30% Mileage Increase Equates to an Extra 45 gal or 180 litres PER Bottle A Minimal 15% Increase Equates to an Extra 22 gal or 90 litres PER Bottle Cleans Spark Plugs and Glow Plugs and Saves You $$$ on Maintenance Costs.

EXCESSIVE EXHAUST (SMOKING)

AFTER KFI!!

TEST SUMMARIES

CONTINUED…

CONTINUED…

TECHNICAL INFORMATION AND NOTES