ServerProtect 5.58 for NT Tech Support Dep.
Table of Contents Introduction and Installation Managing ServerProtect Configuring ServerProtect Maintaining ServerProtect Troubleshooting Frequently Asked Questions
Installation and Deployment
ServerProtect 三層式架構 移動式 管理單元. 移動式 管理單元. 資料伺服器. 一般伺服器 (for NetWare). 一般伺服器 (for NetWare). 一般伺服器 (for NT). 一般伺服器 (for NT).
Pre-installation Check Management Console Windows 2003 with SP1 Windows 2000 Professional, Windows 95/98, Windows NT 4.0 with SP6a A monitor with 800 x 600 or higher resolution Network Protocols and Services: TCP/IP, Microsoft Network and Netbios. These must be running on the installed server
Pre-installation Check Information Server Winodws 2003 with SP1 Microsoft Windows 2000 Professional with client 32 Microsoft Windows NT 4.0 with SP1, SP3, SP4, SP5 or SP6 64 MB or above 50 MB of free disk space An Intel Pentium 166 MHZ processor or faster (or equivalent)
Pre-installation Check Normal Server on Windows NT Windows NT Normal Server Microsoft Windows 2000 Professional Microsoft Windows NT 4.0 with SP6a Windows NT 4.0: 32 MB RAM; 64 MB or above Microsoft Network, and RPC services running
Pre-installation Check User Rights/Roles needed to Install ServerProtect Deployment Topology Sole NT environment, Serial number Valid serial number for the installation Must use a Windows NT Administrator account
Pre-installation Check Check Services Remote Procedure Call (RPC) Remote Procedure Call(RPC) Locator Remote Registry Service Network Services File and Printer Sharing for Microsoft Networks Share Folder C$ or D$ ADMIN$
Installation Process Installing ServerProtect
Installation Process Installing a Full Set of ServerProtect
Installation Process If you are installing the Management Console...
Installation Process If you are installing an Information Server...
Installation Process If you are installing an Information Server... How to Install IS?
Installation Process If you are installing a Normal Server...
Installation Process If you are installing a Normal Server...
Installation Process If you are installing a Normal Server... If the to-be installed Normal Server runs Novell NetWare Installing an NT Normal Server via the Setup program Installing a NW Normal Server in a Pure TCP/IP setup Installing a NW Normal Server in a IPX/SPX setup
After Installation… Install Server Protect Service Pack tw/product.asp?productid=17 tw/product.asp?productid=17
After Installation… … a program group entry for the Management Console will be created
After Installation… … a service for the Information Server will be created and started
After Installation… … an entry in the Add/Remove Program will be created for the Information Server
After Installation… … a service for the Normal Server will be created and started
After Installation… … an entry in the Add/Remove Program will be created for the Normal Server
After Installation… … an icon on the system tray will be created on the Normal Server
ServerProtect Management Console
Management Console Opening the Management Console Select Trend ServerProtect Management Console from the Start Menu How to open Management Console?
Management Console Side Bar Information Server Main Menu Column Field Domain Normal Server (ServerProtect Server) Domain Browser Tree Configuration Area
Managing Information Servers
Selecting Information Servers
Viewing Information Server Log
Moving Information Servers
Backing Up IS Data
Restoring IS Data
Managing Normal Servers
Adding a New Normal Server Installing NS from the console
Managing Normal Servers Moving a Normal Server between domains Select a Normal Server under one domain Drag and Drop to the another Domain Removing a Normal Server You can remotely uninstall the ServerProtect 5 software You can locally perform the uninstallation on that server Moving a Normal Server between IS The original IS service should be stopped. Go to Domains | Add a Normal Server Select the Normal Server(s). The selected Normal server will now report to the new IS
Searching a Lost Normal Server
Deleting a Non-responding Normal Server
Configuring and Performing Task
ServerProtect Task Wizard
Creating a New Task How to do a scheduled scan? Equivalent Click this
Real time scan setting Demo Scan Now Demo Deploy Demo Purge Log Demo Export log Demo Print log Demo Run Statistics Demo Creating a New Task
Opening the Existing Task List Equivalent
Running an Existing Task Equivalent Perform Now
Modifying an Existing Task Click Modify
Modifying an Existing Task
Viewing an Existing Task Click View
Viewing an Existing Task
Removing (deleting) an Existing Task Click Remove
Configuring Virus Scanning
Actions Taken on Infected Files Click this
Configuring Virus Scanning Special Notes on Compressed File Scanning The first layer filename of the infected compress file appears on the Log. Take actions (Rename, Delete, Move) on the infected file from the Log. To clean infection, you need to manually decompress and perform manual scan on it.
Scanning Profile Click this
Real-time Scanning
Configuring Virus Scanning
Defining Actions Against Viruses
Information for Novell Netware Users Scanning MAC Files
Manual Scanning (Scan Now)
Configuring a Manual Scan (Scan Now)
Configuring Manual Scan
Scheduled Scanning
Configuring a Scheduled Scan
Configuring Exclusion List
Directory Exclusion List How to configure directory exclusion list?
File Exclusion List
Virus Exclusion List
Configuring Deny Write List
Configuring Deny Write List - Folder How to configure NT Deny Write Directory List?
Configuring Deny Write List - File How to configure NT Deny Write file extensions?
Removing Deny Write List
Information for Novell Netware Users 2 Deny Write Options only Available for Netware Servers User Management If someone needs to update a program or make any changes to protected files/directories, you can give timed modify rights to him Exception Settings For NetWare servers, some files and directories in the Deny Write list may need to remain unprotected.
Configuring Notifications
Configuring Notification Standard Alert Outbreak Alert
Notification Events
Configuring Outbreak Alert
Setting Alert Methods
Configuring Alert Methods Message Box Alert How to configure Message Box?
Configuring Alert Methods Internet Mail ( ) Alert How to configure Alert?
Configuring Updates
How ServerProtect Performs Updates Management Console Sends command to IS Connect to Active Update Server to download updates Updates Save in IS NT Normal Servers Netware Normal Severs Deploys Internet
Viewing Current Version of Updates
Downloading Updates How to Download Update for IS (first time)
Configuring Download Settings From Internet From the Network
Configuring Download Settings
Checking for a successful update Check Management Console, if IS has the Newest Updates Version
Deploying Updates How to deploy Scan engine updates? How to deploy pattern updates? Check the component you want to deploy
Configuring a Scheduled Deployment Existing Task New Task
Checking for a successful deployment Check Management Console If Normal Server Has A Successful Deployment
Rolling-back the Previous Deployment Action Check the component you want to rollback
Viewing Scan Result and Log Files
Viewing Scan Results Real-time scan enabled Infected File found
Taking actions on infected files ServerProtect’s Recommendation Description on the Virus Found Details on the infected file found
Taking actions on infected files Click Purge Take Action
Viewing Logs Log Types Date Range Select Action to perform
Viewing Detailed Log Information Click Next or Previous to view other events Description in the event More information about the event
Viewing Deploy Logs Only Update Log Type is checked Notice that the dates are not in the 4-digit format. You can change the date format from the Control Panel
Viewing Scan Statistics Only Infections Log Type is checked Click the Statistics button
Thank you !!