GRINDING WHEELS for Tube Mill Line #402, Daebok BDG, 10, Hwasan-ro, 233 Beon-gil, Jangan-ro Suwon-si, Gyunggi-do, , KOREA TEL : , FAX : Mobile : e.mail : Skype : charyjeong

GRINDING WHEEL > GPB FEATURE No eye acridity, excellent endurance & grinding power. As substitute with steel & hemp buff, be good at wear abrasion, flexible, grinding powers.. Good at surface illuminometer USE Remove scale for Steels & nonferrous metals or pipe polishing. Remove burr of press, punching machines. Finished polishing of rolling roll or piston. Each Watch case’s surface polishing Outer Circumference 205 ㎜ ~ 355 ㎜ 8˝~ 14˝ Thickness 16 ㎜ ~ 100 ㎜ 2/3˝~ 4˝ HardnessM H Grade# 24 ~ # 800 ParticleA C ▶ Max rotation allowance : 1,800 RPM

GRINDING WHEEL > NPB FEATURE Excellent skills of narrow, deep polishing it need the surface soft & elegant. USE Copper’s nose part Each industrial machineries welding parts Sink’s corner welding part Use for hand grinding if the parts can ‘t move Outer Circumference 100 ㎜ ~ 406 ㎜ 4˝~ 16˝ Thickness 5 ㎜ ~ 50 ㎜ 1/5˝~ 2˝ HardnessM H Grade# 60 ~ # 320 ParticleA ▶ Max rotation allowance : 1,800 RPM

GRINDING WHEEL > WOOD TEX FEATURE It’s accomplished porosity formation on nature foaming condition so no burning state by frictional heat and specially can’t transform the molding shapes. USE Each furniture parts for straight molding products. (for skeleton polishing, automatic line) Outer Circumference 205 ㎜ ~ 255 ㎜ 8˝~ 10˝ Thickness 25 ㎜ ~ 100 ㎜ 1˝~ 4˝ HardnessM H Grade# 100 ~ # 150 ParticleA ▶ Max rotation allowance : 1,800RPM

GRINDING WHEEL > CARBON TEX FEATURE A s a memorial stone which compound of poly vinyl acetal and can use for steel & nonferrous metal’s curve part or square backs and end face of plate glass. USE Watch case or curve of bend part or curve part polishing Special steel of SK-5, SK-11’s hair line or final finished polishing. B-type for jewelry polishing or end face of plate glass. Edge polishing for back side TV braun tube’s glass. Outer Circumference 150 ㎜ ~ 305 ㎜ 6˝~ 12˝ Thickness 4 ㎜ ~ 100 ㎜ 1/5˝~ 4˝ HardnessS B Grade# 60 ~ # 1000 ParticleC WA ▶ Max rotation allowance : RPM

GRINDING WHEEL > UB-TEX FEATURE After plasticity of pottery, it’s excellent for finished lower part polishing. Mold elastic foam so properly use for hand operated. Using abrasive grain which specially coated, so outstanding to grinding ability and endurance is too strong. Outer Circumference 205 ㎜ ~ 255 ㎜ 8˝~ 10˝ Thickness 15 ㎜ ~ 25 ㎜ 2/3˝~ 1˝ HardnessS M H Grade# 46 ParticleWA ▶ Max rotation allowance : 1,800 RPM

GRINDING WHEEL > KS-TEX SF FEATURE The most powerful polishing ability which include highest content of polish particles. Minimize the impact to the workers which include Super Soft Foam resin. Long term work with stability cause of the excellent elastic and occur less heat yield. USE For hair line cleaning of steel & nonferrous metals. Surface treat of Watch case or glass frame. Finishing grind of each Cylinders or funitures after coating. Outer Circumference 205 ㎜ ~ 305 ㎜ 8˝~ 12˝ Thickness 15 ㎜ ~ 100 ㎜ 2/3˝~ 4˝ HardnessS M H Grade# 120 ~ # 400 ParticleA C ▶ Max rotation allowance : 1,800 RPM

INDUSTRIAL SCRUBBER FEATURE Special made, use Nylon felt and use both dry process or wet rot which connect with special resin for achieve best grinding power. USE Finishing work of steel or nonferrous metals and furnitures. Remove melt or pollution according to the grinding particle’s sort or rough. FormSHEETROLL Max Dimension(m/m)300×300300×11,000 Max Dimension(Inch)12 × 1212 × 430 Thickness ㎜ ~ 8 ㎜ 1/5˝~ 1/3˝ Grade ＃ 120 ~ # 400 ParticleA C

INDUSTRIAL SCRUBBER > HI-LAP FEATURE Required elastic & grinding power, suitability for surface treatment using Air tool. USE Crank shaft surface treatment. Melt or Oil removement Outer Circumference 150 ㎜ 6˝ Thickness 7㎜7㎜ 1/3˝ Grade# 60 ~ #120 ParticleA

INDUSTRIAL SCRUBBERKS > TEX- PC FEATURE Remove for Burr or scale which of stainless & nonferrous metals. Use special Resin which strong water proofing, possibly use wet rot products. Improvement surface illumination work. Excellent for soft metal’s hair line or fitting after glossy. USE Each plates (Nickel, chrome, etc) steel sheets cleaning. Steel sheets cleaning after washing acid, alkalize. Remove an oxide after annealing. Final treatment each nonferrous hair line. For hair line of Brass frame. PCB surface treatment. Outer Circumference 205 ㎜ ~ 520 ㎜ 8˝~ 21˝ Thickness 25 ㎜ ~ 1,060 ㎜ 1˝~ 42˝ HardnessS M H 2H Grade# 80 ~ # 1,000 ParticleA C GC ▶ Max rotation allowance : 1,800 RPM ParticleA C GC ▶ Max rotation allowance : 1,800 RPM

INDUSTRIAL SCRUBBERKS >TEX CRRF FEATURE Excellent cleaning work of each coating or plating. Suitable for Silver light hair line of nonferrous metal. Good at grinding power and surface treatment, make shortening working time, asset for surface roughness work. Excellent durability, each particle’s tensile strength is high Possible to control elasticity control so materialized optimum conditions. USE Middle step’s grinding each platings(Nickel, alkalize) Grinding each cylinder pipes, before after plating. Grinding mike glass frame before after plating. Outer Circumference 205 ㎜ ~ 355 ㎜ 8˝~ 14˝ Thickness 15 ㎜ ~ 100 ㎜ 2/3˝~ 4˝ Hardnessc Grade# 80 ~ # 800 ParticleA C ▶ Max rotation allowance : 1,800 RPM

INDUSTRIAL SCRUBBER > POLY-BELT FEATURE It’s a Belt with forming steps made mixed with insolubility PVA Fiber including PVA resin & thermoplastic resin after forming make the Belt acetylate. USE Grinding for final treatment work or hair line grinding. FormROLL Width 25 ㎜ × 150 ㎜ 1˝~ 6˝ Length15m60˝ Grade# 120 ~# 400 ParticleA C

INDUSTRIAL SCRUBBER > KS TEX-PW FEATURE Suitable for automatic line. Excellent grinding power & can product which various particle & size. Suitable for request soft surface when working it occurred less heat USE Final grinding treatment or after rolling remove scaling for steel or nonferrous metals. Or furniture, bed, photo frame’s final grinding before or after coating. Final grinding each nonferrous metals hair line. Outer Circumference 205 ㎜ ~ 406 ㎜ 8˝~ 16˝ Thickness 16 ㎜ ~ 850 ㎜ 2/3˝~ 34˝ HardnessS M H Grade# 80 ~ # 3,000 ParticleA C ▶ Max rotation allowance : 1,800 RPM

INDUSTRIAL SCRUBBER > KS TEX-RW FEATURE Excellent work for curve parts which have elastic & durability. Excellent work for final finishing work of each materials like stainless, nonferrous metals, or wood’s hair line. USE Finishing treatment for watch, glass frame’s each hair lines. Grinding for aluminum materials like cycle, motorbike Molding work for wood. Final grinding for knifes, scissors. For Bevel round of final grinding for edge of TV braun tube front glass Outer Circumference 205 ㎜ ~ 305 ㎜ 8˝~ 12˝ Thickness 12 ㎜ ~ 100 ㎜ 1/2˝~ 4˝ HardnessS M H Grade# 80 ~ # 800 ParticleA C ▶ Max rotation allowance : 1,800 RPM

INDUSTRIAL SCRUBBER > KS TEX-RV FEATURE Good to grinding & durability used special resin which has abrasion resistance & heat resisting property & Nylon fabric. Use wet rot, various size and suitable for automatic line. USE Final treatment grinding of stainless or nonferrous metals hair line Centerless grinding of steel or nonferrous Improvement illumination work after grinding bars or grinding bars after or before plating. For TV braun tube back side glass edge. Outer Circumference 205 ㎜ ~ 405 ㎜ 8˝~ 16˝ Thickness 22 ㎜ ~ 205 ㎜ 2/3˝~ 8˝ HardnessS M H Grade# 80 ~ # 1,000 ParticleA C ▶ Max rotation allowance : 1,800 RPM

INDUSTRIAL FELT / MS-WHEEL FEATURE Obtain soft grinding surface special treatment fabric with final gloosy wheel and forming with special resin. Various sizes for each products and many different uses as soft, medium, and hard type. USE Final treatment for glossy of TV braun tube frond glass edge. For each plate glass’s final end facing. Glossy grinding for steel or nonferrous metals. Outer Circumference 150 ㎜ ~ 600 ㎜ 6˝~ 23˝ Thickness 25 ㎜ ~ 100 ㎜ 1˝~ 4˝ HardnessDS DM DH Grade# 1,000 ~ # 8,000 ParticleA C WA C ▶ Max rotation allowance : 1,800 RPM

INDUSTRIAL FELT / ROUGE RAP FEATURE As final surface grinding for TV braun tube front glass surface, many different size & products developed. USE I-TYPE & XY-TYPE models. Choosen by valve producing company’s grinding conditions. Braun tube bulb(PANEL) final treatment grinding PANEL PART 10”, 14”, 20”, 21”, 25”, 29”, 32”