Circular Saw by Dan Haight. Circular saw history The first circular saw came to be in 1777. At this point in time people had to use their feet to power.

Slides:

Advertisements

Similar presentations

Objective Use agricultural mechanics tools properly and safely.

Advertisements

Types of saw blades Crosscut –used to make smooth cuts across the grain Rip –used to make smooth fast cuts with the grain Combination –used to make fast.

Table of Contents Unit 1- Understand the Problem Unit 2- Gather Information Unit 3-Develop Solutions Unit 4-Implement a Solution Unit 5-Test and Evaluate.

Safety Always Wear Safety Glasses when in the Wood Shop.

Construction Safety Part 5: Hand and Power Tool Safety.

Drill Press. General Safety Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person in.

Portable Power Tool Safety. Portable Electric and Cordless Drill Be sure the electric drill is disconnected from the power source before installing bits.

Sliding Compound Miter Saw Safety & Use. Safety Rules Always keep hands at least 4” away from blade Always allow the blade to get to speed before cutting.

Machine Shop Hazards, Machine Tool Safety

1 Part 1 Directions: As your instructor goes the safety rules for the lab, write down the missing word or words in the blank spaces on your study guide.

Principles of Manufacturing Safety First! Part II

Stationary Power Tool Safety

Safety tips to avoid ladder injuries. Objective To be able to demonstrate the safe use of ladders that are used primarily for construction and/or maintenance.

SHOP SAFETY Design & Fabrication Shop Botwood Collegiate.

+ Safety wood working equipment Amber Henderson. + OBJECTIVES Demonstrate safety practices for hand tool woodworking. Select and use appropriate personal.

Portable Power Tools Safety and Use. Portable Power Tools Cordless Drills/Drivers Corded Drills Random Orbit Sander Dual Action Sander Jigsaw Circular.

Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED. Unit 15 Woodworking with Power Machines.

Production Tools in Technology

General SHOP SAFETY In technology education, SAFETY is regarded as essential for at least two reasons. #1 – The natural concern for people’s welfare.

Radial Arm Saw. General Safety Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person.

Chop Saws Also known as miter saws and drop saws Used for straight and angle cuts in timber and metal Used in framing and finished carpentry.

Basic Tool Safety and Equipment

SAFETY RULES Follow all directions the first time they are given. Be courteous in language and actions. Be on time and prepared to participate. Respect.

Miter Saws Also known as chop saws Used for straight and angle cuts in timber and metal Used in framing and finished carpentry.

Table Saw Ms. Ritter.

Skilled Trades / Res. Cons’t. Drill Press Mr. Mark Shortall / Technology Department.

Principles of Manufacturing Safety First! Part II Safety Materials for Scroll Saw and Band Saw Copyright © Texas Education Agency, All rights reserved.

Foundations of Agriculture I Mr. DeBord. Safety Procedures Wear Safety Glasses.

Drills and Drill Press Safety in the Lab

Keeping yourself safe when using common hand-held tools

Table Saw Safety & Operation The Table Saw is one of the most versatile pieces of equipment but must be operated safely and correctly. Follow these safety.

Table Saw. General Safety Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person in the.

Power Tool Safety Guidelines for Construction Trades Students.

Safety Rules for 9 th Grade Shop Radial Arm Saw: Safety Rules Never cut a board that is less than 12 inches long. Always pull the saw using the handle;

Miter Saw IMPORTANT SAFETY INSTRUCTIONSWARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result.

Matt H, 2010 Safety Captain, The Green Machine Team 1816.

SRC General Safety Procedures Safety rules and guidelines for robot construction activities Office of Technical and Career Education Virginia Beach City.

Technology Safety Rules. DADSCATKKW DDDDo not distract people while working AAAAll observers must stand behind safety line DDDDress appropriately.

Chop Saw. May not cause death but can cause severe injuries. May not cause death but can cause severe injuries. Loss of fingers or arms can occur Loss.

Safety in the Machine Shop Session 1. Shop Tools and Techniques2.

General Safety Foundations of Engineering and Technology I.

WOOD MATERIALS TECHNOLOGY 4 th Edition. Chapter 22 Machines.

HEADS UP FOR SAFETY! SAFETY TUTORIAL. HEADS UP! H ANDS ARE THE MOST VULNERABLE PART OF THE BODY. E YES AND EARS ALSO NEED PROTECTION. A SK WHEN YOU ARE.

Router Safety Foundations of Agriculture I Mr. DeBord.

Ms. Vallejo’s Technical Theater Safety Rules and Regulations

Surfacer. General Safety Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person in the.

Ms. Wilson WOODSHOP SAFETY LESSONS & VIDEOS. BASIC SAFETY 1. Eye protection must be worn while using power equipment and bladed hand tools 2. No loose.

General Safety Foundations of Engineering and Technology.

SAMI MAKERSPACE MAKE: AN ELECTRONICS WORKSHOP. POWER TOOLS.

Bronson Hulbert. 1. Never alter a guard or use the tool with a guard missing. Be sure all guards are in place and working properly before each use. 4.

Band Saw Safety in the Lab. Common Techniques Parts of the Band Saw.

UTILITY KNIFE SAFETY. Always wear safety glasses when using utility knives; blades can snap off unexpectedly. Always use sharp blades. Dull blades require.

Scroll Saw Operation and Safety

Miter Saw Safety 1. Parts ID 2. How it Works 3. Safety.

Parts, Safety and Operation. 1. Fence 2. Table 3. Miter Adjusting Lever 4. Miter Scale 5. Turn Base 6. Vertical Hold-Down Vise 7. Arm 8. Slide.

Session 1: Drills; Saws, Part 1 Session One Objectives When trainees have completed this session, they should be able to do the following: 1.Identify.

General & Machine Safety Notes

General Shop Safety Review

BAND SAW CHAPTER 24.

Power Tool Safety Don’t operate a machine until:

Principles of Architecture & Construction

PORTABLE POWER TOOLS and EQUIPMENT

Miter Saws Also known as chop saws

Radial Arm Saw.

Band Saw Safety Rules.

Foundations of Engineering and Technology I

Presentation transcript:

Circular Saw by Dan Haight

Circular saw history The first circular saw came to be in At this point in time people had to use their feet to power the saw

How to be safe with a circular saw You must have safety glasses on Must make sure all loose clothing is secured You must have all jewelry off your hands and other body parts near or around the saw. Have firm control of your saw as well as the material being cut

How to be safe with a circular saw Make sure blade guard is working and never tie it up out of the way. Always be aware of where your power cord is so that you do not cut through it. Check the thickness of material being cut and the depth of the blade to avoid problems.

Circular saw uses Used to make straight cuts perpendicular or beveled with a surface. They are used to cut wood and some metals They are used on many different jobs such as Construction Contracting They can also be used in home projects.