Delta PLC DVP-MC Series Network Type Motion Controller Automation for a Changing World

Easy, Accurate, Powerful CANopen based network  Makes wiring & communication easy 1Mbps communication speed  Enhances motion control accuracy 16 axes synchronous control  Powerful solution for more complex applications CANopen based  high noise immunity enhances the control accuracy (pulse based controller is easy to be interfered) 1Mbps communication speed  8 axes can be controlled within 4ms, high efficiency, capable of higher level applications. 16 axes  16 axes motion control suits your needs of a more intricate motion control performance, such as robot arm.

Professional Motion Control Various motion instructions  Makes motion program easier E-CAM (Electronic cam) function  Perfect for flying shear or rotary cut applications Supports G-codes input function  Easy to adapt Multi-axis applications 3 axes linear/arc interpolation  smooth positioning function improves the motion control quality E-CAM function  Max 16 electronic cam curves editable and max 2048 points storable (higher E-CAM resolution), E-CAM works perfectly for flying shear and rotary cut applications Supports the dynamic download of G code, highly adaptable for devices using G-codes

All-In-One Motion Solution Dual CPU design with Multi-task processing Enhancing Efficiency PLC CPU MC CPU Tasks: Executing motion control program Controlling servo via Motion Bus Acquiring encoder signal Ethernet communication（MODBUS TCP) RS485 communication Tasks: Collecting the data from connected modules RS232& RS485 communication Executing PLC ladder diagram 10MC contains two CPUs internally: PLC CPU and MC CPU. MC and PLC independently conduct parallel processing of their own tasks to enhance efficiency. The data exchange could be conducted between PLC CPU and MC CPU PLC CPU is mainly in charge of processing the data in the extension modules of the left side and right side and logic programs. MC CPU is responsible for processing the motion control programs.

All-In-One Motion Solution Built-in Ethernet, CANopen, RS-485 and Encoder interface  All-in-one design. Compact and powerful Supports two-side extension modules  Makes configuration expanding easier Powerful motion controller built-in with Ethernet, CANopen, encoder, and RS-485 interface. Max 7 left-side high-speed modules, and max 8 right-side special modules connectable. Max I/O: 480 points 240 inputs and 240 outputs expendable by DIO modules. Abundant fieldbus networks are supported. Such as CANopen(DS301), DeviceNet, PROFIBUS Other functions (optional): Offers speed, position and torque settings Electronic gear function for tuning speed and position

Powerful Software-CANopen Builder Configuration Project CAM G codes CFC The CANopen Builder software can be used to configure the CANopen network, edit the e-cam curve, G codes and motion program. CFC: Continuous Function Chart Device Report

Provide Various Application Libraries CANopen Builder provides single-axis, multi-axis, application and logic instruction library. Users can select the desired instructions in the corresponding instruction library.

Targeting Applications Targeting & Successful applications Package machinery Food & beverage processing Material handling system Winding machines Material handling Robot Package Machine

CANopen Motion Controller DVP10MC To learn more about Delta, please visit www.deltaww.com.