© 2012 Autodesk Efficient Pipe Design C14785-V Bryan Thomasy CAD Manager

© 2012 Autodesk Class Summary  In this class, you will be shown how to manipulate and generate pipe parts lists and networks to efficiently design complex pipe networks using alignments, profiles, intersections tools, and pipes. The class will contain instructions on how to add structure fittings and blocks to the existing pipe catalog in the form of water fittings and assign styles for graphical representation. We shall then generate alignments and vertical profiles representing the center of our pipe. Using the intersection tool to tie the branches of our network together and then extract the feature line to create the pipe network.

© 2012 Autodesk Learning Objectives At the end of this class, you will be able to:  Generate part/structure families  Efficiently modify and manipulate the pipe/structure catalogue  Creating Pipe Network Parts list from new catalogue  Utilize a 3 stage design method  Layout your design in an alignment and vertical profile format  Use the Civil 3D intersection tool to tie your vertical together  Generate your designed pipe network from the alignment and profile

© 2012 Autodesk Section #1 Generate part/structure families

© 2012 Autodesk Generate part/structure families  Create 2 new parts for fittings and valves  Pressure Structure (rectangular in model)  Pressure Valve (circular in model)  Discuss naming methods  The name of the part group pre-populates the part family when brought in.

© 2012 Autodesk Section #2 Efficiently modify and manipulate the pipe/structure catalogue

© 2012 Autodesk Efficiently modify and manipulate the pipe/structure catalogue  Think “Lego’s”  Modifying the sizes by adding our own in the “Editing Values” area  Research your parts  Identify outer sizes  Imagine them as rectangular blocks and use those dimensions  Working with the “out-of-box” part catalogue  Have then written down to make data entry easier

© 2012 Autodesk Section #2 Creating Pipe Network Parts Lists from the new catalogue

© 2012 Autodesk Creating Pipe Network Parts Lists from the new catalogue  The most simple, yet most time consuming task and will require;  Clearly thought out parts list for pipe structures  Premade horizontal blocks  Optional vertical blocks  One Diameter per parts list  Pipe Network Rules  Pipes & Structures 

© 2012 Autodesk Section #4 Utilize a 3 stage design method

© 2012 Autodesk Utilize a 3 stage design method  Theory  There are multiple variations of pipe designs;  Residential \ Commercial  Process  Large Diameter – etc  Each has its own set of rules but all have common criteria

© 2012 Autodesk Utilize a 3 stage design method  Design Method:  30% Milestone  The beginning and general layout of the horizontal alignment.  Napkin design  60% Milestone  Vertical design takes focus and conflicts are identified and resolved  90% Milestone  Turning Point – Pipes are now placed into the project

© 2012 Autodesk Section #5 Layout your design in an alignment and vertical profile format

© 2012 Autodesk Layout your design in an alignment and vertical profile format  30% Milestone – Horizontal Pipe Alignment Layout  Use Polar tracking for defined angles  Generate Polyline first and convert to alignment  60% Milestone – Vertical Pipe Alignment Layout  Generate Profiles from alignments  Create Vertical alignments to define top of pipe  Use “Pipe Crossing” dynamic block for interferences  Vertical Deflection labeling to identify deflections or fitting placement

© 2012 Autodesk Section #6 Intersection Tool

© 2012 Autodesk Intersection Tool  Not Just for Corridors  Connecting the Vertical alignments together  Locks the vertical of one to the primary alignment  Identifies changes and keeps vertical information in sync  Provides a ‘check-n-balance’ for design  Minimizes errors

© 2012 Autodesk Section #7 Generate your designed pipe network from the alignment and profile

© 2012 Autodesk Generate your designed pipe network from the alignment and profile  90% Milestone – Turning point  Pulling it all together – taking the vertical and horizontal and extracting the data  Pipe creation  Create a feature line from the vertical and horizontal layout  Importing Parts list from library/separate drawing  Creating pipe network and swapping parts  Applying Rules  Merging multiple Networks

© 2012 Autodesk Thank you for attending  If you have any questions, please contact me.  My address is  Comments, ideas, or thoughts are always welcome

© 2012 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.