FHM TRAINING TOOLS This training presentation is part of FHM’s commitment to creating and keeping safe workplaces. Be sure to check out all the training programs that are specific to your industry.

Safety Scanning How to Really See and Recognize Hazards

Safety Scanning Objectives TO BECOME EFFECTIVE SAFETY SCANNERS – CONSTANTLY BE LOOKING FOR HAZARDS – SPOT AND RECOGNIZE HAZARDS – TAKE ACTION TO REDUCE OR ELIMINATE UNDERSTAND BASIC HAZARDS SAFETY IS NOT A SPECTATOR SPORT

How to Recognize Hazards TRAINING JOB EXPERIENCE FAMILIARITY WITH OPERATION LACK OF FAMILIARITY WITH AREA USE OF SAFETY SCANNING SURVEY TECHNIQUE

What is a Hazard? CAUGHT IN OR BETWEEN CONTACT WITH STRUCK BY FALL FROM OR ONTO SLIP OR TRIP WHAT IF?

How to Safety Scan SCAN BY LOOKING AROUND IDENTIFY POTENTIAL HAZARDS PREDICT WHAT COULD HAPPEN DECIDE IF IT IS A HAZARD EXECUTE NEEDED ACTION

Break Large Areas Into Small Pieces CANNOT EAT A WHOLE PIE AT ONCE LOOK AT ONE SHOP ONE WALL AREA OF SHOP ONE PIECE OF EQUIPMENT ONE ASPECT OF THAT EQUIPMENT

Practice Safety Scanning DEMONSTRATION OF TECHNIQUE REVIEW OF HAZARDS AND PRACTICE OF TECHNIQUE USING SAFETY SCANNING

What to do When Hazards are Identified CORRECT YOURSELF OR WRITE WORK ORDER REFER TO SUPERVISOR OR SAFETY DEPARTMENT BRING UP IN SAFETY MEETING REFER TO SAFETY COMMITTEE REDUCE THE HAZARD UNTIL FIXED

Assignment for Continued Practice MUST PRACTICE TO BE EFFECTIVE START WITH SMALL AREA AND SHORT TIME INCREASE AREA AND TIME PRACTICED GOAL IS TO MAKE IT AUTOMATIC REVIEW AT NEXT MEETING