SUPERACRYL PLUS DURACRYL PLUS Cross-linked denture base resins PRODUCT PRESENTATION

Heat-curing cross-linked denture base resin SUPERACRYL PLUS Heat-curing cross-linked denture base resin I N D I C A T I O N S: Bases of complete dentures Bases of partial dentures Indirect rebasing Manufacturing of orthodontic appliances

SUPERACRYL PLUS A D V A N T A G E S Reduced risk of breakage High precision, excellent fit Easily finished and polished Different types of polymerization Available in wide range of colours Conforms to ISO 1567:2000

SUPERACRYL PLUS Properties HIGH FLEXURAL STRENGTH I GH STRENGTH SUPERACRYL PLUS Product 1 Product 2 ISO 1567:2000 Reduced risk of breakage of denture

SUPERACRYL PLUS Properties LOW WATER SORPTION O W S R P T I N SUPERACRYL PLUS Product 1 Product 2 ISO 1567:2000 Colour stability of dentures

SUPERACRYL PLUS Properties LOW WATER SOLUBILITY O W SO L U B I T Y SUPERACRYL PLUS Product 1 Product 2 ISO 1567:2000 Stability of properties – mechanical and visual

SUPERACRYL PLUS Properties High dimensional stability High precision of dentures and excellent fit High color stability Denture does not change its colour in time Very good adhesion to acrylic teeth Low risk for teeth to fall out of the denture

SUPERACRYL PLUS Natural aesthetics of gingival margin and interdental papilae

SUPERACRYL PLUS WORKING TIMES Dough time: 12 – 16 min Plasticity interval: cca 10 min Total working time: 25 min

SUPERACRYL PLUS Polymerization STANDARD POLYMERIZATION: Dip the cuvette in cold water Heat to 70 °C within 30 minutes Maintain the temperature for another 30 minutes Increase the temperature to 100 °C within 30 minutes. Maintain the temperature for another 30 minutes. The total polymerization time is 2 hours.

SUPERACRYL PLUS Polymerization ACCELERATED POLYMERIZATION Place the cuvette in cold water. Heat to 100 °C. Maintain the temperature for 45 minutes. QUICK-BOILING POLYMERIZATION Suitable only for partial dentures of up to 4 teeth. Place the cuvette in boiling water (100 °C). Maintain the temperature for 40 minutes.

SUPERACRYL PLUS Polymerization POLYMERIZATION IN PRESSURE POLYMERIZATOR: Polymerization directly on the model, without cuvette. Suitable only for smaller partial dentures and denture repairs. Pressure: 0,6 MPa Temperature: 100 – 110 °C Time: 10 – 15 minutes

Self-curing cross-linked denture base resin DURACRYL PLUS Self-curing cross-linked denture base resin I N D I C A T I O N S: REPAIRS OF DENTURES EXTENSIONS OF DENTURES MANUFACTURING OF IMMEDIATE DENTURES

DURACRYL PLUS A D V A N T A G E S Easy preparation and workability Convenient manipulation time Easily finished and polished Matches shades of SUPERACRYL® PLUS Conforms to ISO 1567:2000

DURACRYL PLUS Properties HIGH FLEXURAL STRENGTH I GH STRENGTH DURACRYL PLUS Product 1 Product 2 ISO 1567:2000

DURACRYL PLUS Properties LOW WATER SORPTION O W S R P T I N DURACRYL PLUS Product 1 Product 2 ISO 1567:2000

DURACRYL PLUS Properties LOW WATER SOLUBILITY O W SO L U B I T Y DURACRYL PLUS Product 1 Product 2 ISO 1567:2000

DURACRYL PLUS Properties High strength bonding to denture base polymers High strength of repaired denture, minimizes risk of repeated breakage in the same place High color stability The repaired part is not visible and does not change its colour in time

DURACRYL PLUS WORKING TIMES Dough time: 2 – 4 min Manipulation time: 3 – 5 min Total working time: 7 min

SUPERACRYL PLUS DURACRYL PLUS PACKAGING Liquid 250 g Powder 500 g Measuring devices

Available shades SUPERACRYL PLUS DURACRYL PLUS O – transparent X – with fibers U, V, Z DURACRYL PLUS O - transparent U, V, Z