FIGURE 12-1 Excess air temperature curve.

FIGURE 12-2 HCl/Cl2 equilibrium.

FIGURE 12-3 Adiabatic emperature versus heating value at various percentages of excess air.

FIGURE 12-5 Flame temperature versus excess air.

FIGURE 12-6 Flare tip used for combustion of waste gases that are above HEL.

FIGURE 12-7 Thermal VOC incinerator.

FIGURE 12-8 Regenerative VOC incinerator.

FIGURE 12-9 Burning time for atomized droplets.

FIGURE Internal mix nozzle.

FIGURE External mix atomizer.

FIGURE High intensity burner.

FIGURE Down-fired combustor.

FIGURE Rotary kiln incinerator.

FIGURE Fixed hearth incinerator.

FIGURE Multiple-hearth incinerator.

FIGURE Fluidized incinerator.

FIGURE Fluid-bed incinerator types.

FIGURE Rotary kiln with vertical secondary combustion chamber.

FIGURE Partial elevation of an incinerator.

FIGURE Hydraulic ram feeder.

FIGURE Waste heat boiler.

FIGURE Dry/dry APC.

FIGURE Wet/dry APC.

FIGURE Venturi scrubber.

FIGURE Calvert collision scrubber.

FIGURE Ionizing wet scrubber.

FIGURE Entrainment separators.

FIGURE Mobile (transportable) incinerator.