Pneufit push-in fittings For general purpose pneumatic applications

Pneufit Push-in fittings General purpose pneumatic fittings providing neat installation and fast tube assembly For use with flexible plastic tubing Easy tube release and remake of the joint Vacuum to 18 bar operating pressure Roll marked collet for easy tube size identification Comprehensive range of fitting forms 6 mm

Pneufit component parts Collet Collet teeth ‘O’ Ring Body Pre-applied thread sealant Temperature range C to 70 0 C Corrosion resistant nickel plated body and collet Materials of construction Brass body and collet Medium Nitrile ‘O’ Ring Non PTFE based thread sealant

Range of tube sizes Metric Tube sizes 4 mm o/d 5 mm o/d 6 mm o/d 8 mm o/d 10 mm o/d 12 mm o/d 14 mm o/d Tubing types: Polyamide (PA) Polyurethane (PU)

Range of tube sizes Inch Tube sizes 3/16 inch o/d 1/4 inch o/d 5/16 inch o/d 3/8 inch o/d 1/2 inch o/d Tubing types: Polyamide (PA) Polyurethane (PU)

Range of thread sizes Parallel thread sizes M5 G 1 / 8 G 1 / 4 G 3 / 8 G 1 / 2 Taper thread sizes R 1 / 8 R 1 / 4 R 3 / 8 R 1 / 2 m mm

Internal Hexagon

Internal hexagon The through bore of the straight adaptors are standard hexagon sizes Where valve or manifold ports are close pitched, conventional ring or socket spanners are unsuitable Power driven or hand operated hexagon keys solve the problem

Tube and Fitting assembly

Tube preparation Use a standard tube cutter to give a square end Ensure that the tube end is clean and free from surface damage 90 0

Connecting the tube

Connecting the tube (Pneufit) Push the tube through the collet into the fitting Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

Connecting the tube (Pneufit) Push the tube through the collet into the fitting Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

Connecting the tube (Pneufit) Push the tube through the collet into the fitting Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

Connecting the tube (Pneufit) Push the tube through the collet into the fitting Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

Connecting the tube (Pneufit) Push the tube through the collet into the fitting Continue pushing firmly through the collet teeth and ‘O’Ring up to the tube stop Pull back on the tube to reinforce the collet tooth gripping action. Pressure can then be applied

Disconnecting the tube

Disconnecting the tube (Pneufit) Turn off and exhaust the air pressure Push the tube and collet into the fitting Hold down the collet and pull out the tube

Disconnecting the tube (Pneufit) Turn off and exhaust the air pressure Push the tube and collet into the fitting Hold down the collet and pull out the tube

Disconnecting the tube (Pneufit) Turn off and exhaust the air pressure Push the tube and collet into the fitting Hold down the collet and pull out the tube

Disconnecting the tube (Pneufit) Turn off and exhaust the air pressure Push the tube and collet into the fitting Hold down the collet and pull out the tube

Disconnecting the tube (Pneufit) Turn off and exhaust the air pressure Push the tube and collet into the fitting Hold down the collet and pull out the tube

Pneufit range of fittings forms Series 10 ( Metric tube )

Pneufit parallel adaptors (metric) Straight adaptors Internal adaptors Straight stem adaptors Swivel elbow adaptors 45 O Swivel elbow adaptors Parallel Y adaptors Swivel side tee adaptors Swivel tee adaptors

Pneufit taper adaptors (metric) Straight adaptors Straight stem adaptors Fixed elbow adaptors Swivel elbow adaptors Extended swivel elbows Fixed side tee adaptors Fixed tee adaptors Swivel tee adaptors Swivel side tee adaptors Parallel Y adaptors

Pneufit tube connectors (metric) Straight connectors Elbow connectors Tee connectors Parallel Y connectors 4 Way cross connectors

Pneufit stem connectors (metric) Straight stem connectors metal Straight stem connectors plastic Stem tailpiece adaptors Reducing connectors Stem elbow connectors Silencers Pressure indicator ( plug in ) Plugs

Pneufit bulkhead connectors (metric) Bulkhead connectors Pressure indicators Swivel bulkhead elbow connectors Mixed bulkhead connectors PIF to compression

Pneufit banjo connectors (metric) Elbow banjo assemblies Tee banjo assemblies Banjo bolts Elbow banjo bodies Tee banjo bodies Regulating elbow banjo assemblies Regulating banjo bolts

Pneufit banjo connectors (metric) Banjo bolt with top port Banjo bolt with indicator Banjo bolt single stacking Banjo bolt double stacking Banjo bolt triple stacking Stacking banjo bolts can be used with any combination of elbow or tee banjo bodies

Pneufit banjo flow regulators Thread sizes taper R 1/8 R 1/4 R 3/8 R 1/2 Tube sizes 4 mm o/d 6 mm o/d 8 mm o/d 10 mm o/d 12 mm o/d

Pneufit push-in manifolds Tube inlet type, 8 or 10 mm o/d inlet each end Threaded inlet type, with 8 or 10 mm o/d tube inlet on one end Thread sizes taper R 1/8 R 1/4 R 3/8 R 1/2 Six outlets each 4, 6 or 8 mm o/d

Pneufit range of fittings forms Series 12 ( Inch tube )

Pneufit range (inch tube) Straight adaptors M5 Straight adaptors taper Swivel elbow adaptors Elbow connectors Swivel tee adaptors Swivel side tee adaptors Tee connectors Straight connectors bulkhead connectors

End