Part Drawings October 30, 2006 Team Moondogs Chris Culver Rahul Kirtikar Elias Krauklis Christopher Sampson Michael Widerquist

List of Fabricated Parts Outer Container Outer Container Inner Container Inner Container Inner Container Holder Inner Container Holder Lid Lid Foot Pedal Foot Pedal Master Cylinder Master Cylinder Slave Cylinder Slave Cylinder

Outer Container

Inner Container

Inner Container Holder

Lid

Foot Pedal

Master Cylinder Base

Master Cylinder Ram

Slave Cylinder Base

Slave Cylinder Ram

Pre-Manufactured Parts Hinge Hinge Latch Latch Check Valve Check Valve Ball Valve Ball Valve Hose (tubing) Hose (tubing) Spring Spring O-rings O-rings

Hinge

Latch

Check Valve Max. Pressure: ° F Male to Male ½” Part No. 7768K18 (McMaster Carr)

Ball Valve Max Pressure ° F ½” Part No K23 (McMaster Carr)

Hose 1/2” ID, 1/16” wall thickness Max psi 200 Tensile Strength 1400 psi Part No. 5394K16 (McMaster Carr)

Spring Part Number McMaster Carr 9657K869657K86 TypeCompression Springs MaterialBrass Outside Diameter3/8" Wire Size.042" Overall Length25/32" EndsClosed and Ground Wire TypeRound Wire Load3.76 lbs. Deflection at Load.40" Rate7.30 lbs./inch Compressed Length.38"

O-rings Master Cylinder Part Number: 9559K K212 Courtesy: McMaster Carr Website AS568A Dash Number225 TypeO-Ring Cross Section ShapeRound Width1/8" Actual Width.139" Inside Diameter1-7/8" Actual Inside Diameter1.859" Outside Diameter2-1/8" Actual Outside Diameter2.137" MaterialPTFE Part Number: 9559K K225 AS568A Dash Number241 TypeO-Ring Cross Section ShapeRound Width1/8" Actual Width.139" Inside Diameter3-7/8" Actual Inside Diameter3.859" Outside Diameter4-1/8" Actual Outside Diameter4.137" MaterialPTFE Slave Cylinder