Κώστας Γρηγορίου Sales Engineer Ιούνιος 26, 2007 Connect Your Serial Device to Ethernet ADAM – 4570 / 71 / 77 / 79

EDG : Ethernet Data Gateway  EDG COM port: –ADAM-4570/L/S –ADAM-4571/L/S –EDG 4504/4508/4516  EDG Serial: –ADAM-4579 –ADAM-4577 Same Hardware Different Firmware

Software Architecture Windows 95/98/NT/2000/XP User’s Program 4570/1 Driver EDG Hardware Open Com port Internet Open WinSocket 4577/9

What is ADAM-4577/9?  Empower serial devices to access or be accessed in Ethernet independent of any O.S.  Serial devices handle data or commands from/to RS- 232/422/485 over Ethernet.  Serial device communicate peer-to-peer without host PC over Ethernet. ADAM-4577 ADAM-4579 Ethernet EDG Serial family RS-232/422/485

The Benefits of ADAM-4577/9 The Benefits of ADAM-4577/9  Any computing platforms can access existing serial device through ADAM-4577/9 by Ethernet standard protocol and without special driver  Two serial devices can communicate with each other peer-to-peer without intermediate host PC  With ADAM-4579, one serial device can control other devices actively by applying current RS- 232/422/485 AT commands

Network Architecture:Polling  The host PC polls serial devices’ data directly through ADAM-4577/9  ADAM-4577/9 can be applied with standard Ethernet protocol in most O.S. such as Windows(winsocket), Linux(sockets) Ethernet Request serial device to send data ADAM-4577/4579 Internet Any O.S (Windows, Linux) Serial device: PLC, Barcode reader

Network Architecture:Event-handling  When Event/alarm occurs on the connected device, it can sent out the data to the host PC via Ethernet.  Reduce the load and increase the performance of Ethernet and Host PC. Ethernet ADAM-4577/4579 Internet Any O.S (Windows, Linux) Event/alarm occurs Event/alarm was actively sent to PC

Network Architecture:Peer-to-peer  Data can be sent/received between two serial devices directly to increase the performance of the whole system and will save costs for your project by absence of PC. Ethernet Data ADAM-4577/4579 Internet Without any PC Data

Network Architecture:Controlling  ADAM-4579 provides modem AT-style commands to connect to other serial devices dynamically.  Save Host PC programming effort and increases the performance for data exchange. Ethernet ADAM-4579 Internet Serial device sends data to networking device 1 Serial device sends data to networking device 2

H/W Specification of ADAM-457x Polling, Event, Peer-to- peer, Controlling networking model (79 only) Speed up to 230 Kbps Diagnostic LEDs 2 independent RS- 232/422/485 port 10/100 Mbps Base-T 32-bit CPU & Real Time O.S.

S/W Specification of ADAM-457x Modem AT-style command (79 only) Remote download firmware High-security Protection Data and Control mode Networking API: WinSock, Socket Easy Self- diagnostic

Features: Auto-detection  Auto-detection for all ADAM- 4570/4571/4572/4579/ EDG-4504/08/16  Location Auto- detection: Click “Locate” button to locate specified ADAM The specified ADAM- 4579’s LED will light for 8 min.

Features: Self-diagnostic  Plug in “Loop-back test connector” to the cable  Key-in the IP address  Click “Test” button to diagnose communication line, includes Stop/Data bits, Parity, Baud rate. RJ-45 RJ48 to DB9 (male) Loopback tester

Features: Remote download firmware  Click “Download FW” button to update new firmware into ADAM-4579 remotely

Features: Data and Control mode  Data mode Data from serial device can be automatically sent to the other device  Control mode ADAM-4579 provides commands for serial device to connect to different devices dynamically

Telecommunication Transportation Building Laboratory Factory Security Target Market

Complete Ethernet-enabled Solution -Control from Ethernet or RS-232/422/485 interface Can be used in most O.S. -Windows, Linux etc. Easy-to-use Windows-based utility - Auto-detect, Remote download firmware, security, Locate

Thank You