1 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance ADVANCED PHY PERFORMANCE RON HRANAC Note: This presentation is intended for.

Slides:



Advertisements
Similar presentations
EE578 Assignment #3 Abdul-Aziz.M Al-Yami October 25 th 2010.
Advertisements

Cable Modem : Technology
Triple-Play Service Testing
Signal Encoding Techniques
Cable Modems From a presentation by Donner Grigsby CPSC 611.
Safecom INGRESS GATE technology (Patent p)
Chapter : Digital Modulation 4.2 : Digital Transmission
DOCSIS 3.1 Overview SCTE Piedmont & Other Chapters July 31, 2014
Modulation Error Ratio and Signal-to-Noise Ratio Demystified Presented by Sunrise Telecom Broadband …a step ahead.
Anatomy of Radio LAN Onno W. Purbo
Journées Micro-Drones Presentation High Data Rate Transmission System for Micro UAVs LEP> SCN Fabien MULOT: Internship ONERA-SUPAERO Vincent CALMETTES:
Forward Error Correction Demystified Presented by Sunrise Telecom Broadband … a step ahead.
New ADSL2 Standards Which delivers improved rate and reach performance, advanced diagnostics capabilities, standby modes, and more to broadband designers.
CIS 6930 Powerline Communications PHY Layer (c) 2013 Richard Newman.
Rome, February 14, 2013 Status of the Project Report on the first year activities With the support of the Prevention, Preparedness and Consequence.
Digital transmission over a fading channel Narrowband system (introduction) Wideband TDMA (introduction) Wideband DS-CDMA (introduction) Rake receiver.
Analog Transmission : Data Communication and Computer Networks Asst. Prof. Chaiporn Jaikaeo, Ph.D.
1 Digital Data, Analog Signals (5.2) CSE 3213 Fall May 2015.
Constellations Demystified Presented by Sunrise Telecom Broadband … a step ahead.
© 2006 Cisco Systems, Inc. All rights reserved. Implementing Secure Converged Wide Area Networks (ISCW) Module 2: Teleworker Connectivity.
IT-101 Section 001 Lecture #15 Introduction to Information Technology.
QAM Technology Rev. A00.
Digital to analogue conversion. 1 DIGITAL-TO-ANALOG CONVERSION Digital-to-analog conversion is the process of changing one of the characteristics (A,
Plant Hardening August 2008.
Communication Theory as Applied to Wireless Sensor Networks muse.
DOCSIS 3.0 US Planning & Bandwidth Management John Downey, Consulting Network Engineer – CMTS BU.
Motorola DOCSIS® 3.0 & Channel Bonding Introduction Joshua Eum Director of Solutions Sales June 13, 2006.
Chapter 6. Signal Encoding Techniques
Home Certification Webinar
Analog Transmission of Digital Data. The Telephone Network Originally designed for analog communications only. Today, standard analog telephone service.
Improvements in throughput in n The design goal of the n is “HT” for High Throughput. The throughput is high indeed: up to 600 Mbps in raw.
Cable Modem Overview EEL 4930 – Computer Networks Fall 2002 Bradley C. Spatz.
Coding No. 1  Seattle Pacific University Modulation Kevin Bolding Electrical Engineering Seattle Pacific University.
Signal Encoding Techniques Chapter 6. Reasons for Choosing Encoding Techniques  Digital data, digital signal Equipment less complex and expensive than.
1 © 2006 Cisco Systems, Inc. All rights reserved. Adaptive Equalization Cisco Public Adaptive Equalization Ron Hranac.
Cable network and multimedia services Speaker: 陳羿仲 Advisor: 吳和庭 2012/12/05.
Digital transmission over a fading channel Narrowband system (introduction) Wideband TDMA (introduction) Wideband DS-CDMA (introduction) Rake receiver.
Measuring and Qualifying Upstream Signals
CWNA Guide to Wireless LANs, Second Edition Chapter Four IEEE Physical Layer Standards.
1 University of Canberra Advanced Communications Topics Television Broadcasting into the Digital Era by: Neil Pickford Lecture 5 DTTB Transmission Error.
LECC 2006, Valencia Potential Upgrade of the CMS Tracker Analog Readout Optical Links Using Bandwidth Efficient Digital Modulation Stefanos Dris Imperial.
CWNA Guide to Wireless LANs, Second Edition Chapter Four IEEE Physical Layer Standards.
DOCSIS® 3.1 – An Overview Ron Hranac Technical Leader Cisco Systems
Modulation Error Ratio and Signal-to-Noise Ratio Demystified Presented by Sunrise Telecom Broadband …a step ahead.
Doc.: IEEE /383 Submission November1998November 1998 Jamshid Khun-Jush, ETSI-BRANSlide 1 BRAN#11 PHY Decisions & Issues to Resolved with
Signal Encoding Techniques Chapter 6. Reasons for Choosing Encoding Techniques Digital data, digital signal Equipment less complex and expensive than.
CWNA Guide to Wireless LANs, Second Edition Chapter Four IEEE Physical Layer Standards Modified.
Presented by: Ahmad Salim. 2  The acronym WiMAX stands for “Worldwide Interoperability for Microwave Access”. It is based on IEEE standard for.
Coding Theory. 2 Communication System Channel encoder Source encoder Modulator Demodulator Channel Voice Image Data CRC encoder Interleaver Deinterleaver.
Doc.: IEEE /0909r0 Submission July 2012 Jong S. Baek, AlereonSlide 1 Analysis, simulation and resultant data from a 6-9GHz OFDM MAC/PHY Date:
Chapter : Digital Modulation 4.2 : Digital Transmission
Presented by: Ahmad Salim. 2  The acronym WiMAX stands for “Worldwide Interoperability for Microwave Access”. It is based on IEEE standard for.
PAPR Reduction Method for OFDM Systems without Side Information
Advanced Computer Networks
Case Study (ZigBee): Phase IV Transmitter & Receiver Simulation.
1 Kyung Hee University Chapter 9 Using Telephone and Cable Networks for Data Transmission.
Waveform Basics Presented by: Greg Glenn Sr. Director of RF Engineering SOLiD 4/8/16Copyright © 2016 | CIBET | All rights reserved1.
Digital transmission over a fading channel
Modulation Error Ratio and Signal-to-Noise Ratio Demystified Presented by Sunrise Telecom Broadband …a step ahead.
CSE 5345 – Fundamentals of Wireless Networks
KOMUNIKASI DATA Materi Pertemuan 10.
TLEN 5830-AWL Advanced Wireless Lab
SC 64-QAM in clause 21 PHY Date: Authors: November 2015
Bit rate Baud rate Goal in data communication is to increase the bit rate while decreasing the baud rate. Increasing the data rate increases the speed.
Simulink Implementation of a Cable Modem
Trellis Coded Modulation
CSE 5345 – Fundamentals of Wireless Networks
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs) Submission Title: IEEE High Rate WPAN PHY Layer Preamble definition.
EEC4113 Data Communication & Multimedia System Chapter 3: Broadband Encoding by Muhazam Mustapha, October 2011.
Submission Title: FPP-SUN Bad Urban GFSK vs OFDM
Presentation transcript:

1 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance ADVANCED PHY PERFORMANCE RON HRANAC Note: This presentation is intended for Cisco internal audiences and customers under NDA only. This presentation contains confidential intellectual property information that is proprietary to Broadcom Corporation and Texas Instruments.

222 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance DOCSIS ® Background DOCSIS 1.0 gave us standards-based interoperability, which means “certified” cable modems from multiple vendors work with “qualified” cable modem termination systems (CMTSs) from multiple vendors. DOCSIS 1.1 added a number of features, including quality of service (QoS), more robust scheduling, packet classification and other enhancements that facilitate voice services. Data Over Cable Service Interface Specification

333 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance DOCSIS Background DOCSIS 1.0 and 1.1—collectively known as DOCSIS 1.x— support two downstream modulation formats: 64-QAM (quadrature amplitude modulation) and 256-QAM. Modulation formatChannel bandwidth, MHz Symbol rate, Msym/sec Raw data rate, Mbps Nominal data rate, Mbps 64-QAM (DOCSIS) ~ QAM (DOCSIS) ~38 64-QAM (Euro-DOCSIS) ~ QAM (Euro-DOCSIS) ~50

444 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance DOCSIS Background DOCSIS 1.x supports several upstream data rates, ranging from a low of 320 kbps to a high of Mbps. It also supports two modulation formats— quadrature phase shift keying (QPSK) and 16- QAM—as well as five upstream RF channel bandwidths. Channel bandwidth, MHz Symbol rate, ksym/sec QPSK raw data rate, Mbps QPSK nominal data rate, Mbps 16-QAM raw data rate, Mbps 16-QAM nominal data rate, Mbps ~ ~ ~ ~ ~ ~ , ~ ~ , ~ ~9.0

555 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance DOCSIS Background DOCSIS 1.1 added some enhancement to upstream transmission robustness, using 8-tap adaptive equalization. DOCSIS 2.0: Higher upstream data throughput per RF channel, up to Mbps DOCSIS 2.0 supports 64-QAM in the upstream—plus 8-QAM and 32-QAM—and optionally supports 128-QAM trellis coded modulation (TCM) encoded modulations for S-CDMA channels. Higher orders of modulation require more robust data transmission To facilitate more robust upstream data transmission, DOCSIS 2.0 introduced advanced PHY

666 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Advanced PHY – 2 nd Generation Burst Mode RX Direct sampled RF front end Ingress cancellation Frequency stacking Spectrum management Improved adaptive equalizer from 2.0 Spec Improved burst mode RX preamble Improves 1.x as well as 2.0 cable modems What is Advanced PHY? PHY: Physical Layer

777 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance What is Advanced PHY? Symbol (T)-spaced adaptive equalizer with 24 taps compared to 8 taps in DOCSIS 1.x Allows operation in the presence of more severe multipath and microreflections, and should accommodate signals near the band edge where group delay is more prevalent Improved burst acquisition Carrier and timing lock, power estimates, equalizer training and constellation phase lock are all done simultaneously. This allows shorter preambles, and reduces implementation loss. Better forward error correction (FEC) DOCSIS 1.x provides for the correction of up to 10 errored bytes per Reed Solomon block (T=10) with no interleaving, while DOCSIS 2.0 allows correction of up to 16 bytes per Reed Solomon block (T=16) with programmable interleaving.

888 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance What is Advanced PHY? Advanced PHY silicon incorporates ingress cancellation technology in the upstream receiver chip, which further enhances upstream data transmission robustness. Think of ingress cancellation as a way to digitally remove in-channel impairments such as ingress and common path distortion.

999 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Performance Concepts Implementation Margin Closeness to ‘theoretical’ in an additive white Gaussian noise (AWGN) environment Example – If the theoretical bit error rate (BER) at 21 dB carrier-to- noise ratio (CNR) is 1x10 -6 but a CMTS actually needs 23 dB CNR to achieve a 1x10 -6 BER, the implementation margin is 2 dB. Processing Gain Processing to improve performance (e.g., FEC or ingress cancellation) Example – When ingress cancellation is turned off and a carrier-to- interference ratio (C/I) of 10 dB yields 1x10 -6 BER, then turning on ingress cancellation allows C/I = 0 dB for 1x10 -6 BER, processing gain is 10 dB.

10 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC16C/S, MC28C/E Burst Mode Receivers - 1 st Generation Broadcom’s BCM3137 is within 2 dB of Implementation margin of analog receiver (VCO, SAW…) adds another 2-3 dB AND Broadcom Confidential

11 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28U/X – 2 nd Generation Direct Sampled Burst Mode Digital Receiver All frequency conversion and selectivity in PHY ASIC Total implementation margin < 0.5 dB of theory

12 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28U/X MC16U/X – Annex A/B Upstream Broadcom BCM3138 (same as BCM chip, but without S-CDMA) 5-65 MHz dual A-TDMA, adaptive ingress cancellation, integrated FFT Downstream – Broadcom BCM3034 Annex A/B Modulator No SAW filter required with downstream chip MC5x20U – Annex A/B Upstream Texas Instruments TI4522 series 5-65 MHz A-TDMA, advanced PHY including ingress cancellation Downstream – Broadcom BCM3034 Annex A/B modulator No SAW filter required with downstream chip Cisco’s Advanced PHY

13 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Cisco’s Advanced PHY Advanced RF front end and Cisco MAC hardware, allow Cisco’s MC5x20U and MC28U Broadband Processing Engines (BPE) to offer improved capacity, performance and reliability. Operates within 0.5 dB of theory Advanced PHY with ingress cancellation Greater than 17 Mbps single modem upstream throughput Line rate DOCSIS 1.1 and 2.0 processing using the advanced Cisco DOCSIS MAC technology

14 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Cisco’s Line Card RF Front End High density—2 downstreams, 8 upstreams (MC28U) or 5 downstreams, 20 upstreams (MC5x20U) per line card Enhanced RF robustness Embedded upstream ingress cancellation Direct sampling Integrated upconverters ATDMA-capable

15 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance RF Performance: BER vs. AWGN

16 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28U Packet Error Rate Versus AWGN Frequency: 30 MHz Mod: QPSK Symbol Rate: 1,280 ksym/sec Power: 0 dBmv Packet Size: 64 Bytes Packet Rate: 100 Packets: RS_N=84 RS_T=3 QPSK

17 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28U Packet Error Rate Versus AWGN Frequency: 30 MHz Mod: 16QAM Symbol Rate: 1,280 ksym/sec Power: 0 dBmv Packet Size: 64 Bytes Packet Rate: 100 Packets: RS_N=88 RS_T=5 16-QAM

18 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28U Packet Error Rate Versus AWGN Frequency: 30 MHz Mod: 64QAM Symbol Rate: 5,120 ksym/sec Power: 0 dBmv Packet Size: 64 Bytes Packet Rate: 100 Packets: RS_N=96 RS_T=9 64-QAM

19 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28U/MC28C Comparison Frequency: 30 MHz Mod: QPSK Symbol Rate: 1,280 ksym/sec Power: 0 dBmv Packet Size: 64 Bytes Packet Rate: 100 Packets: RS_N=84 RS_T=3

20 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28U/MC28C Comparison Frequency: 30 MHz Mod: 16-QAM Symbol Rate: 1,280 ksym/sec Power: 0 dBmv Packet Size: 64 Bytes Packet Rate: 100 Packets: RS_N=88 RS_T=5

21 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC520S/U BER Versus AWGN QPSK Within Measurement Uncertainty of Theory

22 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC520S/U BER Versus AWGN 16-QAM Within Measurement Uncertainty of Theory

23 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC520S/U BER Versus AWGN 64-QAM Within Measurement Uncertainty of Theory

24 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Lower Implementation Margin Advantages Can operate at lower CNR for a given BER than earlier generation CMTSs Provides improved operating headroom

25 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance RF Performance: Ingress Cancellation

26 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance 16-QAM BER Opens previously unusable spectrum Enables reliable operation in the presence of ingress Narrowband and wideband Works with all DOCSIS 1.0, 1.1, & 2.0 cable modems Ingress Cancellation Texas Instruments Confidential

27 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance MC28/16 U/X w/ Broadcom BCM3138 Adaptive Ingress Cancellation RX AFEDemod Ingress Cancel & Equalizer Broadcom Confidential

28 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Broadcom BCM3138 Ingress Performance Symbol Rate = 5.12 MHzCluster SNR = dB Static CW Ingress (64-QAM, SIR = 0 dB) Broadcom Confidential

29 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Broadcom BCM3138 Ingress Performance Symbol Rate = 5.12 MHz Wideband Ingressors 20 kHz and 100 kHz (16-QAM, SIR = 9 dB) Cluster SNR = dB Broadcom Confidential

30 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Broadcom BCM3138 Ingress Performance Symbol Rate = 5.12 MHz Four CW Ingressors (64 QAM, SIR = 6 dB) Cluster SNR = dB Broadcom Confidential

31 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Broadcom BCM3138 Ingress Performance Four CW Ingressors (16-QAM, SIR = 0 dB) Cluster SNR = dB Broadcom Confidential

32 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance CableLabs PHY22B Ingress Cancellation C/I Single CW Ingress QPSK 1.28MBaud AWGN = -20 dB 16QAM 2.56MBaud AWGN = -25dB 64QAM 5.12Mbaud AWGN = -30dB MC28/16U/X-20.2 dB-18.2 dB-10.7 dB CableLabs optional PHY test Packet error rate in presence of single CW interferer & AWGN PER <0.5%, 64-byte packets Note: Negative C/I indicates interferer is larger than desired signal

33 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance RF Performance: Receive Equalizer

34 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance DOCSIS 2.0 ADTMA Equalizer DOCSIS 1.1 specifies an 8-tap T-Spaced Pre-Equalizer which can mitigate micro- reflections of –10dB (at.5 micro-sec delay) with 27 dB MSE DOCSIS 1.1 Pre-Equalizer enables reliable operation at 16-QAM in channels that could only support QPSK in DOCSIS 1.0 DOCSIS 2.0 specifies a 24-tap T-Spaced Pre-Equalizer which can mitigate micro- reflections of –10dB (at.5 micro-sec delay) with 33 dB MSE DOCSIS 2.0 Pre-Equalizer can enable reliable operation at 64-QAM even in channels that can only support QPSK in DOCSIS 1.0 Cisco Systems Confidential 24-tap adaptive equalizer can operate in DOCSIS 1.0 Mode to compensate linear plant errors (slope, group delay, microreflections) increasing DOCSIS 1.0 modem channel capacity

35 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance 24-Tap Adaptive Equalizer BER < 1x10 -8 : Reed Solomon T=0 (Off) DOCSIS tap equalizer could only support QPSK or 1.28 Msym/sec Operate 1.0 cable modems at band edge 16-QAM 2.56 Msym/sec over –3.4dB slope and 125 nsec group delay Impaired 39 – 42 MHz Band

36 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance RF Performance: Downstream MER

37 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance RF Downstream Path DSx High Speed D/A BCM3034 Modulator UPX DSx UPX High Speed D/A BCM3033 Modulator SAW MC16C/S MC28U/16U No SAW Filter !!

38 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Downstream Constellation 857 MHz Total EVM = 1.18% !

39 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Does Advanced PHY Work?

40 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance SCTE Cable-Tec Expo Advanced PHY Demo AM carriers from comb generator No packet loss!

41 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance SCTE Cable-Tec Expo Advanced PHY Demo CPD from downstream feed and diode circuit No packet loss!

42 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance SCTE Cable-Tec Expo Advanced PHY Demo Noise from HP signal generator No packet loss!

43 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance SCTE Cable-Tec Expo Advanced PHY Demo CBT screen shot showing all three impairments

44 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance 24-Tap Adaptive Equalization Lab Test 6.4 MHz bandwidth 64-QAM signal After adaptive equalization: No correctable FEC errors and the CMTS’s upstream SNR estimate increased to 36+ dB Before adaptive equalization: Correctable FEC errors were incrementing about 7000 codewords per second (232 bytes per codeword). The CMTS’s upstream SNR (MER) estimate was 23 dB

45 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Customer Field Test 16-QAM signal riding on top of S-CDMA signal, with CW carrier in-channel No packet loss!

46 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Customer Field Test Spectrum analyzer screen shot showing 16-QAM signal at ~12 MHz center frequency No packet loss!

47 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance Advanced PHY: The Bottom Line Improves upstream data transmission robustness Allows use of spectrum that was previously unusable Facilitates higher orders of modulation Provides additional operating headroom Many advanced PHY features work with DOCSIS 1.x cable modems Cost-effective way to kick-start the deployment of new services

Q and A 48 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance

49 © 2003 Cisco Systems, Inc. All rights reserved. Advanced PHY Performance