Qtanium 100 Non-Powered Asset Tracking

Complete tracking capabilities from within a single solution: on-highway, off-highway and now, non-powered assets. Confidential | 2

Provides visibility to all assets within single application Suited for assets where no power is available, where the asset may be unattended for long periods and monitoring utilization of non-powered assets within the same system as powered assets – Shock and vibration certified to military standards – IP-97 rated device – Sends location update information only twice a day Every 12 hours events = 3 ½ year battery life – Device sends an alert when the batter is low – Battery is replaceable, but not rechargeable *Battery life estimates are based on normal operating conditions. Certain factors outside of normal operating conditions may impact actual battery life. Confidential | ” 2.25” Available with Essential, Fleet+ or Complete

Qtanium 100 installation Installation is easy—bolt or magnet mounted Bolt-on is default Magnetic requires an additional cost Confidential | 4 Magnetic installationBolt-on installation

Reports and the Qtanium 100 The main intent for the Qtanium 100 is to provide location data for non-powered assets. With that in mind, the following reports provide the most relevant data*: – Activity Report By Vehicle – Site Report By Vehicle (Use all event types) – Location Summary Report By Vehicle – Zero Event Activity Report By Vehicle – Event Alert Report by Vehicle *Please note: when a Qtanium 100 is run against any other report the user will receive the standard message "No data can be found for selected criteria."

Qtanium 100 OnlineAVL2 Overview The Qtanium 100 does not detect an ignition state and will always be displayed in OnlineAVL2 as being in an Ignition Off state. The periodic event from a Qtanium 100 will be reported as a Timed Update and contain the following information: – Event Description – Date/Time – Location – Speed – HDOP – Satellites Events from a Qtanium 100 can not report any accumulation of distance traveled. The Trip distance will always be reported as zero. Events from the Qtanium 100 can be recognized by Sites that have been created in OnlineAVL2, but the Qtanium 100 can not support Geofences. The Qtanium 100 can not receive a Query request from OnlineAVL2 thus on demand location updates are not supported. A Qtanium 100 can be labeled and identified in OnlineAVL2 just as any other device (Display Name, Vehicle Groups, Vehicle Types etc.)

Reports and the Qtanium 100 Users can run any report against a Qtanium 100, but the following are the only reports that provide any relevant data: Activity Report By Vehicle Site Report By Vehicle (Use all event types) Location Summary Report By Vehicle Zero Event Activity Report By Vehicle Event Alert Report by Vehicle Replay a Day The following reports will produce limited data, but in general are not very useful considering the nature of the Qtanium 100: State Mileage Report - Will show location information, but no accumulation of Distance Traveled. Fleet Out of Service Report By Vehicle – Data will be presented in this report, but given the Qtanium 100 does not report any distance traveled or ignition on time the purpose of this report isn’t very useful for this device. Engine Hours Report By Vehicle - Will show location information, but no accumulation of Engine Hours or Odometer obviously. When a Qtanium 100 is run against any other report the user will receive the standard message "No data can be found for selected criteria."