【5-Axes Gantry Type Machining Centers】 U800-5AX 【5-Axes Gantry Type Machining Centers】 Edit: Andy 2015/02/27

Directory Market Positioning Comparison with Competitors Specification Configuration Analysis Design Features

Technical Parameter(1) 4+1 Axis Entry-Level/ Full 5 Axes Mid-Range Level A/C Axes Cradle Type X/Y/Z 3 Axes Overlap, gantry Structure. Z-axis X-axis Y-axis C-axis A-axis

Technical Parameter(2) A-axis:0° A-axis:+120° A-axis:-120°

Technical Parameter(3) (Max Machining Area)

Design Features(1) (FEM) Feeler design machine use FEM analysis software. The whole construction, rigidity and module analysis. To make sure the machine reach best construction, price/performance ratio and reliability.

Design Features(2) A2 ● Lifting point (A) ● Holes for folk lift (B) A1 C2 C1 圖A 圖B

Design Features(2) Improved Original

Design Features(3) ● Spindle (STD) Standard module 12Krpm ↑， Built-in type 18Krpm(OPT) 2 1

Design Features(4) Y Axis Dual Driving Feeding System Gantry Type Structure High Rigidity and Fast Feed for U-Shaped structure Allow bigger Rotary Table

Design Features(5) Central and large chip exhausting hole. High efficiency for removing chip.

Design Features(5) ● ATC Flat Mounted Number of Tool can be expanded. Lighter and Simpler – Easier to Maintenance Servo Changing Tool Tool No.: 1 magazine is 32 tools 2 magazines are 64 tools

Design Features(6) ● A/C Axis Built-In Dual-Driven titling rotatory table(LCM) High Torque/High Speed Red :+120 Blue :-120

45 degree 90 degree

Exterior(1) ●Shipment : Flat rack container is required 貨櫃規格區分說明

APPEARANCE

Thank you !