Cesar Marcondes (UFSCar) FIBRE Open Workshop Salvador, 26/ FIBRE Architecture

FIBRE and FIBRE-BR Deployment Infrastructure Wireless and Wired Technologies Federation with FIBRE-EU

Review of FIBRE Island Resources

Island Design Homogeneous “FIBRE-BR racks”? Yes ! – Single documentation Cookbooks on how to create the VMs, Cookbooks on how to use them – Reproducibility / Compliance – Bugs found can be fixed on all islands – New features can be applied uniformly – Modularity to support 2 overlapping “testbeds” in 1 st Phase (OCF-based and OMF-based)

IBM Server

NetFPGA Servers Can be used both as OF SWITCH and experiment PC

Icarus Nodes

OpenFlow Switch for Datapath Normal Switch for Control path Example: UFSCar using DATACOM OF 1.0 hybrid switch (per port configuration)

FIBRE – Island

Example: UFSCar Island Deployment

Hardware Status (Deployment)

Software: Control and Monitoring Framework (CMF) According to the requirements Support at same time both OCF and OMF – OCF (OFELIA Control Framework) – OMF (Orbit Control Framework)

Trapezoid forms (eth1.999, eth2..ethN) are Linxu bridges. Red interfaces is an interface for Dom0 management only Green interfaces, (eth1 and peth1.999) are interfaces for the control LAN Yellow interfaces are experimentation interfaces. Each server can have N of this experimentation interfaces. OFELIA Xen Agent (Concepts)

FIBRE Overall Software Architecture

Logical Topologies Icarus Nodes could be running on the Normal Control Switch (although not elegant) or set a VLAN and “learning switch” controller in the OF Switch

Giga FIBREnet

FIBRE Islands Deployment

Thank you / Obrigado Cesar Marcondes Federal University of São Carlos twitter.com/FIBRE_project