1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks. 5.Practical exercises with the SmartTool. 6.DisplayIT software, showing off the results. 7.The Single-shot StoreIT menus. 8.The Multi-shot StoreIT menus. Training modules

1 What’s new -- SensIT probe -- sealed and unopenable no plugs or cables

1 What’s new -- StoreIT data pad -- sealed in an Aquapac, -- hung on a lanyard.

SensIT & StoreIT -- ten years power - built in, no batteries or chargers. no plugs or cables 1 What’s new --

SensIT, StoreIT & your PC -- transfer data by automatic fast radio link. 1 What’s new --

Quality assurance system -- warns of magnetism or movement 1 What’s new --

Shock resistant to 6000G 1 What’s new -- SensIT in its pressure barrel Watertight to 4000 metres Shockproof to 6000g

2 What can SmartTool do for me? -- Four different tasks Single-shot survey read data on StoreIT combine data on PC to make … Multi-shot survey 3D hole path using magnetic azimuth measurement Orientated survey less than 30m, close to vertical 3D hole path maintaining azimuth with orientation rods Tool or Core orientation, using Gravity roll angle ---- for inclined holes Magnetic toolface angle --- for vertical holes

Eight measurements at each DEPTH (shot) recorded by SensIT 1 Dip (Inclination) of hole 2 Direction (azimuth) of hole for Positional Survey 5 Magnetic field strength 6 Magnetic dip angle for Quality Assurance 3 Gravity Roll angle of SensIT 4 Toolface angle of SensIT for Orientation 7 Temperature of SensIT 8 Depth, time and date for the record 2 What can SmartTool do for me? --

Survey

2 What can SmartTool do for me? -- Orientation Setting the zero Gravity Roll Angle

2 What can SmartTool do for me? -- Orientation Setting the zero MagneticToolface Angle

The Earth’s Gravitational Field 2 What can SmartTool do for me? -- Quality assurance.

The Earth’s Gravitational Field If Grav. Field is not 1.00 G, then SensIT is moving; Dip and Azimuth may both be unreliable 2 What can SmartTool do for me? -- Quality assurance.

The Earth’s magnetic field Variation - angular difference between True North and Magnetic North Magnetic Field Strength - the force of the earth's magnetic field Magnetic Dip Angle - angle the field force lines make with the horizontal At each place on the earth's surface, these values are known. 2 What can SmartTool do for me? -- Quality assurance.

Set the threshold for the local magnetic environment 2 What can SmartTool do for me? -- Quality assurance.

Identify the unreliable azimuths 2 What can SmartTool do for me? -- Quality assurance.

1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks. 5.Practical exercises with the SmartTool. 6.DisplayIT software, showing off the results. 7.The Single-shot StoreIT menus. 8.The Multi-shot StoreIT menus. Training modules

1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks. 5.Practical exercises with the SmartTool. 6.DisplayIT software, showing off the results. 7.The Single-shot StoreIT menus. 8.The Multi-shot StoreIT menus. Training modules

DATA, Shows Survey SETTINGS #, Hole Ref. & Depth Timer } +/- Azimuth Depth }3 +/ Inclination Hole ref. } +/- OK Mag Field Enter Archive OK Mag Dip Set Mag Field/Dip OK G.R/angle Zero G.R/angle OK M.T/face Zero M.T/face OK Time Set time +/- OK Date Set date +/- OK Temperature Multi-shot mode? OK >>Press SETTINGS to exit >>Press NEW to start timer Here the DATA button displays each reading from a Single-shot survey. 7The StoreIT Single-shot menus

First survey press New Next Survey press New SETTINGS 1 Change SETTINGS 2Change SETTINGS 3 Hole ref. }Next DepthHole ref. Start depth }Depth intervalStart depth Depth interval } 5End surveyDepth interval Direction }>>Press DATADirection Time interval }to continue surveyEnd session -download Set time >>Press DATA Set datefor next survey Single-shot mode? >>Press DATA for first survey Here the DATA button is only a switch from the SETTINGS menus back to the survey operation.Then, to start a survey, press NEW 8The StoreIT Multi-shot menus