Takanori Sekiguchi External Review Alignment control servo for type-B/type-Bp (OpLev/WFS) 1 T. Sekiguchi.

Slides:

Advertisements

Similar presentations

Global longitudinal quad damping vs. local damping G v8 1.

Advertisements

8/13/2004 Stefan Ballmer, MIT / LIGO Hanford 1 Length and angular control loops in LIGO Stefan Ballmer Massachusetts Institute of Technology LIGO Hanford.

Cascina, January 25th, Coupling of the IMC length noise into the recombined ITF output Raffaele Flaminio EGO and CNRS/IN2P3 Summary - Recombined.

Frequency response When a linear system is subjected to a sinusoidal input, its steady state response is also a sustained sinusoidal wave, with the same.

Lock-in amplifiers Signals and noise Frequency dependence of noise Low frequency ~ 1 / f –example: temperature (0.1 Hz), pressure.

One Arm Cavity M0 L1 L2 TM M0 L1 L2 TRIPLE QUAD 16m R = 20m, T=1% R = ∞, T=1%  Optimally coupled cavity (no mode matched light reflected back)  Finesse.

Takanori Sekiguchi Italy-Japan Workshop (19 April, 2013) Inverted Pendulum Control for KAGRA Seismic Attenuation System 1 D2, Institute for Cosmic Ray.

LIGO-G D Suspensions Update: the View from Caltech Phil Willems LIGO/Caltech Livingston LSC Meeting March 17-20, 2003.

1 Virgo commissioning status M.Barsuglia LAL Orsay.

LIGO-G M 1 Conceptual Design Review: Initial LIGO Seismic Isolation System Upgrade Introduction Dennis Coyne April 12, 2002.

Suspended Mirror control: Learning through Virgo Experience E. Majorana - I.N.F.N. Pisa Aspen GWAD February 16, 2004.

LIGO-G W Proposed LHO Commissioning Activities in May 02 Fred Raab 29 Apr 02.

Angular Noise in a Suspended Interferometer with DC Readout Royal Reinecke Co-Mentors: Alan Weinstein and Rana Adhikari.

LIGO-G D 1 Requirements Environment and constraints Performance requirements Functional requirements.

LIGO- G060XXX-00-R E2E meeting, September How to design feedback filters? E2E meeting September 27, 2006 Osamu Miyakawa, Caltech.

Calibration of TAMA300 in Time Domain Souichi TELADA, Daisuke TATSUMI, Tomomi AKUTSU, Masaki ANDO, Nobuyuki KANDA and the TAMA collaboration.

Virgo Control Noise Reduction

GWADW 2010 in Kyoto, May 19, Development for Observation and Reduction of Radiation Pressure Noise T. Mori, S. Ballmer, K. Agatsuma, S. Sakata,

Stefan Hild 1Ilias WG1 meeting, Sep 2005, Perugia Title GEO 600 Commissioning progress Max-Planck-Institut für Gravitationsphysik (Albert-Einstein-Institut)

Prototype Test of Vibration Isolation System Current Status & Schedule

Takanori Sekiguchi Anual Meeting of Physics Society of Japan Sep. 22nd, 2013) Prototype Test of Vibration Isolation System Current Status & Schedule 1.

Takanori Sekiguchi ALPS Report, Dec. 26th, 2013 Prototype Test of Type-B 1 Takanori Sekiguchi KAGRA F2F MEETING Feb

Takanori Sekiguchi External Review Control and tuning of suspension 1 T. Sekiguchi KAGRA 4th External Review.

SUSPENSIONS Pisa S.Braccini C.Bradaschia R.Cavalieri G.Cella V.Dattilo A.Di Virgilio F.Fidecaro F.Frasconi A.Gennai G.Gennaro A.Giazotto L.Holloway F.Paoletti.

1 Virgo Commissioning progress ILIAS, Nov 13 th 2006 Matteo Barsuglia on behalf of the Commissioning Team.

LIGO-G D Commissioning, Part II PAC 12, June 2002 Peter Fritschel, LIGO MIT.

Global longitudinal quad damping vs. local damping Brett Shapiro Stanford University 1/36 LIGO G v15.

LIGO-G0200XX-00-M LIGO Scientific Collaboration1 First Results from the Mesa Beam Profile Cavity Prototype Marco Tarallo 26 July 2005 Caltech – LIGO Laboratory.

Harald Lückfor the GEO600 Comissioning team 1ILIAS Meeting, Palma, Oct Title GEO 600 Commissioning Status Based on a talk of Stefan Hild for the.

HAM-SAS fabrication weekly CALTECH, 4/26/06 V. Boschi, V. Sannibale HAM-SAS Mechanical Model Present Status.

External forces from heat links in cryogenic suspensions D1, ICRR, Univ. Tokyo Takanori Sekiguchi GWADW in Hawaii.

Poster Design & Printing by Genigraphics ® The commissioning of the prototype BSC-ISI has discovered a large number of structural resonances.

Lecture 25: Implementation Complicating factors Control design without a model Implementation of control algorithms ME 431, Lecture 25.

Calibration in the Front End Controls Craig Cahillane LIGO Caltech SURF 2013 Mentors: Alan Weinstein, Jamie Rollins Presentation to Calibration Group 8/21/2013.

Chapter 6: Frequency Domain Anaysis

Dual Recycling in GEO 600 H. Grote, A. Freise, M. Malec for the GEO600 team Institut für Atom- und Molekülphysik University of Hannover Max-Planck-Institut.

1 Virgo Commissioning Status WG1 meeting Potsdam, 21 st July 2006.

The VIRGO Suspensions Control System Alberto Gennai The VIRGO Collaboration.

Paolo La Penna ILIAS N5-WP1 meeting Commissioning Progress Hannover, July 2004 VIRGO commissioning progress report.

Two Layers SAS: Damping of Torsion Mode Feb. 5th, 2011 F2F Meeting Takanori Sekiguchi, Riccardo DeSalvo, Ryutaro Takahashi 1/8.

Takanori Sekiguchi Status of Cryogenic Payload Overall Design 1 T. Sekiguchi, E. Hirose JGW-G

LIGO-G Z March 2007, LSC meeting, Osamu Miyakawa 1 Osamu Miyakawa Hiroaki Yamamoto March 21, 2006 LSC meeting Modeling of AdLIGO arm lock acquisition.

LIGO Livingston Observatory Commissioning Status and Proposed Commissioning Activities Prior to S1 Mark Coles May 13, 2002.

1 Frequency Noise in Virgo by Matt Evans. 2 The Actors  Noise Sources  Input Mode Cleaner length noise  Sensing noise on IMC lock  Frequency Servo.

LIGO-G Z LIGO’s Thermal Noise Interferometer Progress and Status Eric D. Black, Kenneth G. Libbrecht, and Shanti Rao (Caltech) Seiji Kawamura.

NLC - The Next Linear Collider Project Keeping Nanometer Beams Colliding Vibration Stabilization of the Final Doublet Tom Himel SLAC NLC MAC review October.

Active Vibration Isolation using a Suspension Point Interferometer Youichi Aso Dept. Physics, University of Tokyo ASPEN Winter Conference on Gravitational.

Filter #7 control April 18, 2016 –, Cascina Paolo Ruggi.

Yoichi Aso Columbia University, New York, NY, USA University of Tokyo, Tokyo, Japan July 14th th Edoardo Amaldi Conference on Gravitational Waves.

ALIGO HSTS Damping Loops Design Comparison J. Kissel, for the SUS and ISC Teams.

GEO600 – The output mode cleaner Mirko Prijatelj for the GEO600-Team Institute for Gravitational Physics Albert-Einstein-Institute Hannover / Germany.

Pcal actuation of the TST stage of the DARM servo loop

Time domain simulation for a FP cavity with AdLIGO parameters on E2E

LIGO Commissioning June 10, 2002

Type-A SAS Local Control Simulation (Current Status)

Summary of iKAGRA Test Run Mar 25-31, 2016

Time domain simulation for a FP cavity with AdLIGO parameters on E2E

ALS Noise Budget and Model Status Report

ALS HIFO-X Noise Budget and Model Status Report

External forces from heat links in cryogenic suspensions

Commissioning progress Stefan Hild Ilias WG1 meeting, Sep 2005

Image Stabilization System (ISS)

Workshop on Gravitational Wave Detectors, IEEE, Rome, October 21, 2004

Frequency Noise in Virgo

Summary of iKAGRA Test Run Mar 25-31, 2016

Summary of iKAGRA Test Run Mar 25-31, 2016

Summary of iKAGRA Test Run Mar 25-31, 2016

Radiation pressure induced dynamics in a suspended Fabry-Perot cavity

Measurement of radiation pressure induced dynamics

Presentation transcript:

Takanori Sekiguchi External Review Alignment control servo for type-B/type-Bp (OpLev/WFS) 1 T. Sekiguchi

Takanori Sekiguchi External Review Overview 2 OSEM damping controls are not allowed to be switched on during the observation phase, in terms of control noise couplings Thence alignment control should rely on oplev and WFS. Oplev is used during/just after the lock acquisition phase and then gradually the control will be shifted to controls using WFS. We want to use actuators on IM since they have larger range. Another possibility is having hierarchical controls using IM&TM actuators. To achieve requirement on noise coupling from WFS, UGF should be set around 1 Hz.

Takanori Sekiguchi External Review Control using IM actuators 3 Put two zeros at a certain frequency to compensate 180 o phase delay. Then the response looks like normal pendulum’s. Design servo filters, having enough gains below 0.1 Hz and low gains above 10 Hz to mitigate noise coupling

Takanori Sekiguchi External Review Actuator responses 4

Takanori Sekiguchi External Review Yaw 5 Compensation with zeros at 1.2 HzServo

Takanori Sekiguchi External Review Yaw 6 Open Loop Total Servo

Takanori Sekiguchi External Review Pitch 7 Compensation with zeros at 0.7 HzServo Precise Notch with Q~1e3, Depending on actual Q

Takanori Sekiguchi External Review Pitch 8 Open Loop Total Servo

Takanori Sekiguchi External Review Pitch noise 9

Takanori Sekiguchi External Review Control succeeded in prototype 10 Pitch Yaw Red: Open loop gain, Blue: Closed-loop actuator response

Takanori Sekiguchi External Review Servo Filter design in prototype 11 Pitch Yaw Notch Q=50 * Need to compensate low pass in oplev Hz

Takanori Sekiguchi External Review Problem 12 Feedback using servo with high-Q notch filter is not robust, since the control gets unstable with slight change of the system. In prototype, the control gets unstable when TM is locked to a photo-sensor (which mimics the signal of interferometer) We can change notch frequency after lock acquisition, maybe… It’s not a smart solution, though. RM pitch resonance Q should be reduced.

Takanori Sekiguchi External Review Q reduction of RM pitch mode 13 In actual system, RM pitch mode has lower frequency (~3.5 Hz), due to material change from tungsten to steel and thickness reduction from 0.6 mm to 0.55 mm. This makes situation even worse. How to reduce Q?