types of camera (MPEG-4 / JPEG4VGA(NP304,NF302) / JPEG 4VGA(NP1000)) can be mixed and calculated the bandwidth and required storage. -Actual camera assignment to each NVR are shown in “Detailed Information”. -Max. # of cameras : 999 units -Max. # of Recording Days : 999 days NVR Simple Calculator - Main Window Input Items Output Items Detailed Information

- 2 - x26 (25.92TB) 21cam, Mbps ND400 #1 2xHDE400 60cam 14cam4cam3cam VGA:MPEG-4 4VGA:JPEG x26 (23.35TB) 19cam, Mbps ND400 #3 2xHDE400 13cam2cam4cam x26 (25.45TB) 20cam, Mbps ND400 #2 2xHDE400 13cam4cam3cam VGA:MPEG-4 NVR Simple Calculator - Main Window Example of Detailed Information

- 3 - MPEG-4 JPEG 4VGA (NP304/NF302) NVR Simple Calculator - Parameter Window MPEG-4 Setting : -For the reference, estimated frame rate is shown beside max. bit rate. The value will be changed automatically based on the setting of Resolution and Quality. JPEG 4VGA (NP304/NF302) Setting : -For the reference, estimated frame rate and data size per image are shown beside Quality setting. -REC ips is limited to the estimated frame rate automatically. -Estimated total bandwidth for the cameras is shown. JPEG 4VGA (NP1000) Setting : -Similar setting to JPEG 4VGA (NP304/NF302). JPEG 4VGA (NP1000)REC Option REC Option Setting : - Audio and VMD Info. can be selected. This setting is applied to all cameras.

Supported devices : WJ-ND400, ND300A and ND200 - Input # of cameras, recording days, HDD capacity etc., then # of units and HDD are calculated. - The limitations to simplify the operation: * Only MPEG-4 and JPEG(4VGA) are supported. (JPEG VGA and JPEG QVGA are not supported.) * Only one parameter set is available for each camera category. (Camera Category : MPEG-4 / JPEG 4VGA(NP304/NF302) / JPEG 4VGA(NP1000)) * Schedule Setting is not available. (Only “Recording Days” and “Hours/Day” can be set.) * Event Recording is not calculated. * The bandwidth for output from NVR is not calculated. NVR Simple Calculator - Preface and features

# of main units are calculated on the following conditions: 2. Cameras are assigned to NVR as evenly as possible. 3. Optimize the camera assignment to NVR so that the # of expansion units can be minimized. NVR... 64cam 1cam NVR... 43cam... 20cam... 24cam18cam... WJ-ND400WJ-ND300AWJ-ND200 1Max. # of cameras64 units32 units16 units 2Max. # of ch (Video+Audio+VMD)72 ch-- 3Max. Input Bandwidth Mbps65.536Mbps32.768Mbps 4Max. Rec Capacity54 HDD28 HDD-... Main unit (ND***) Expansion (HDE) NVR Simple Calculator - Calculation Rules ex.) ND400, MPEG-4:60units, 18days/24hours Audio=ON, VMD.info=ON

Storage calculation in RAID5/RAID6 Mode -If the required HDD is only 1pc, one more HDD is added to satisfy the above condition [2]. (Refer to the figure-A) -If the required HDD in an expansion unit is only 1pc, the total # of HDDs is maintained at same # by shifting a HDD from Main unit to the expansion unit. (Refer to the figure-B) * Except ND300A/HDE300 with 1TB HDD. In this case, only 3 HDDs are installed in the main unit, then one more HDD is added. (Refer to the next calculation Rule-5.) [1] Required HDD for Parity... RAID5: 1xHDD/unit, RAID6: 2xHDD/unit [2] Minimum # of HDD... RAID5: 3xHDD/unit, RAID6: 4xHDD/unit... for parity for net capacity... for parity for net capacity... to satisfy the condition [2] figure-Afigure-B Main unit (ND***) Expansion (HDE) NVR Simple Calculator - Calculation Rules

“2TB Limitation” is calculated in ND300A RAID5 mode. In case of WJ-ND300A with 1TB HDD or more in RAID5 mode, the # of HDD in a unit will be not 4 but 3. (including parity) “2TB Limitation”...The maximum net capacity is limited to 2TB in RAID5 mode. e.g. Even though you install 4x 1TB HDD to ND300A, you cannot record 3TB but 2TB.... for parity (1TB or more) for net capacity (1TB or more) Main unit (ND300A) Expansion (HDE300) NVR Simple Calculator - Calculation Rules RAID5

# of units will be optimized regarding to the cost... 64cam ND400 : 3 units HDE400 : 6 units If there is a possibility that # of Expansion unit(HDE***) can be reduced more than 3 units, 1x Main unit will be added automatically and calculate again cam... 55cam... 55cam... 27cam NVR Simple Calculator - Calculation Rules Main unit (ND***) Expansion (HDE) Expansion (HDE) ex.) ND400, MPEG-4:192units, 14days/24hours HDD=1000G, RAID=OFF ND400 : 4 units HDE400 : 3 units

- 9 - WJ-ND400WJ-ND300AWJ-ND ．80．80．80．8 - HDD use efficiency NVR Simple Calculator - Calculation Rules - Communication Overhead : 5% - Audio bit rate : 32kbps/cam - VMD.Info : 6kbps/cam When VMD.Info is ON, MPEG-4 bit rate will be max.15ips. 7. Others