Ultima 3 Product Family Presentation
Presentation Outline Product Family Overview Competitive Advantages Applications Competitive Analysis
Product Family Overview Ultima 3
High Value Point-to-Point and Point-to-Multi-Point solutions in the 5.8 GHz ISM band. Ultima 3 Series
Rapid Deployment (RD, Point-to-Point) Extended Range (ER, Point-to-Point) Multi-Point (MP, Point-to-Multipoint) –Access Point (AP) –Customer Premises Equipment (CPE) Ultima 3 Series
Key Specifications: Modulation Method:Multi-Code Direct Sequence Spread Spectrum Wireless Data Rate:12 Mbps raw, 10 Mbps effective data rate RF Frequency Range:5.725 – GHz (unlicensed ISM band) Physical:Weather-proof design with integrated/separate antenna Weight: 3.5 kg (with integrated antenna) / 3 kg (without antenna) Antenna:Integrated: 23dBi, Non Integrated: dBi Output Power:-10 dBm to +21 dBm (SW controlled) Receiver Sensitivity:-80 dBm 1 x 10-6 BER) Ultima 3 Specifications
Ultima 3 RD
Fully Integrated Weather Proof Unit Integrated Antenna (23 dBi, 9°) 10/100 BaseT Interface 12 Mbps of Throughput in 33 MHz Range up to 25 km (16 Miles) TDD with Low Latency (3 ms Ethernet to Ethernet) Ultima 3 RD Specifications
Ultima 3 ER
Weather Proof Unit Selectable Antenna 10/100 BaseT Interface 12 Mbps of Throughput in 33 MHz Range up to 75 km (47 Miles) TDD with Low Latency (3 ms Ethernet to Ethernet) Ultima 3 ER Specifications
Ultima 3 MP
Access Point (AP) –Weather Proof Unit –Selectable Antenna –10/100 BaseT Interface –12 Mbps of Throughput in 33 MHz –16 km (10 Mile) range –Supports up to 1023 CPEs Customer Premises Equipment (CPE) –Fully Integrated Weather Proof Unit –Integrated Antenna (23 dBi, 9°) –CIR and MBR –VLAN Tagging (802.1q) –Cloning Capability Ultima 3 MP Specifications
Sample Link Budget
Competitive Advantages Ultima 3 Product Family
Proven Technology Scalability Integrated Rugged Design Low Cost Ownership High Security Efficient Bandwidth Allocation Branching Operation Dynamic Power Control Ultima 3 Value Proposition
Ten Years of Innovative R & D Eight Years of Field Proven Experience Three Generations of Evolving Product Thousands of Successful Deployments The Ultimate Solution Ultima 3 Series Proven Technology
You can always start your network with ONE AP. One 360° Sector Four Sectors Cell Site Deployment Scalability
== Benefits Integrated Design
Easy to install. Easy to operate. Easy to maintain. Web GUI SNMP Low Ownership Cost
Inherently Secure with DSSS Built on Proprietary Technology, MC-DSSS User Configurable Physical Layer Modulation More Security Added by VLAN, IP Filter & RF Group ID Standard Security on Application Layer can be added by End Users, if necessary The multi-layer approach virtually makes impossible for anyone to decode. High Security
Active Remote Ultima 3 One remote10.2 Mbps 50 RemotesUp to 8 Mbps (Shared) Field proven efficient bandwidth allocation allows you to serve more CPEs. Inactive Remote Efficient Bandwidth Allocation
Base Dual Unit Repeater Channel 1 Channel 4 Channel 7 Throughput Single Hop10.2 Mbps (Total) 2 Hops7.6 Mbps (Total) 3 Hops7.2 Mbps (Total) You can bypass any obstacle. Note: Dual Unit Repeater is formed by two units connected back to back using a crossover cable Branching Operation
You can reuse frequencies and cover larger area. Dynamic Power Control Controlled Manually or Automatically (Based on Fade Margin) Reduce Unnecessary Energy While Maintaining a Robust Link Reduce System Interference Maximize Spectrum Utilization
Compact and Fully Integrated Design VLAN (802.1 q) Compliance Web base Graphical User Interface Configuration Cloning Committed Information Rate (CIR) More Billing Information Available New Features
Applications Ultima 3 Product Family
Fixed Wireless Access (FWA) Service Providers (PtMP) –Smaller and Medium Internet Service Providers –Smaller Telecommunications Companies Service Providers
Small and Medium Corporate Enterprises in (PtP and PtMP) –Enterprises with Virtual Private Networks –Vertical Markets such as Government, Education, Transportation, Manufacturing Enterprise Market