Business Enabled Communications System Features

Contents System Feature System Specific Items USB Usage SMDR Mailing Service LED Flashing Control Dummy Dial Tone Service Executive / Secretary PPTP Remote Access Green Mode Tone & Ring Tone – Organization Ring – Organization Board Setting ISDN, VOI, & VMI Board Attribute

- There are one USB port supported in MPB Board - Through USB port, administrator can download system DB and also upload DB file manually. - Also administrator can assign auto download DB file whenever they want time. - Through USB port, administrator can upgrade MPB S/W. DB Up/Download Manually at Attendant Keyset 1. Install USB Stick to MPB USB slot. 2. DB Download: [Tran/PGM] + ‘0’ + ‘9’ + ‘2’ 3. DB Upload: [Tran/PGM] + ‘0’ + ‘9’ + ‘3’ S/W Upgrade at Attendant Keyset 1. Install USB Stick to MPB USB slot. 2. SW Upgrade: [Tran/PGM] + ‘0’ + ‘9’ + ‘1’ DB Download Automatically for Backup 1. Install USB Stick to MPB USB slot. 2. Set Auto-Download Time in a day PGM223-Flex9, Flex10. USB Usage (DB Up/Download & S/W Upgrade with Atd-Keyset) System Specific Items

- System automatically send the to assigned Supervisor for notification about state of SMDR - Sending time rule can be defined SMDR Attribute Admin PGM And also SMDR data can be attached by Sylk File type. So supervisor can open this file with Excel-Program Automatically SMDR Notification 1. Set Mail-Sending Time PGM Daily or Weekly sending rule can be assigned 3. When assigned time, system end SMDR Mailing Service System Specific Items

SMDR Attribute PGM232 Example SMDR Mail Mail Server Address & User Address Domain Name is used for Mail Sender Address Weekly or Daily Set SMDR Mailing Service (WEB-Admin) System Specific Items

- Administrator can control and reassign all kinds LED Flashing rule at PGM Administrator can change Flashing Color and Flashing Rate. - MG system support 46 kinds of Flashing Type and has default flashing rule just like ipLDK series. LED Flashing PGM234 LED Flashing Control System Specific Items

- During Intercom Busy, caller can make One-Digit Service. - Administrator can define One-Digit Service as Step-Call or Other-features. One-Digit Service 1) Step-Call Service 2) Call-Back, Call-Wait, Camp-On, Voice-Over, Intrusion, Pilot-Hunt Intercom Busy Digit PGM237 STEP Call Service One Digit Service Call-Back Call-Wait Camp-On Voice-Over Intrusion Pilot-Hunt Intercom-Busy One Digit Service System Specific Items

- When digit conversion is programmed, the CO line is seized after digit conversion is completed. - With a Dial Tone Digit Service, dummy dial tone can be provided. although before CO line is not seized actually by user. 1. Make Outgoing Grouping CO line 1. LCO Line is Outgoing CO Group 1 2. PRI Line is Outgoing CO Group 2 Ex Site Situation : 1) PRI start from ‘1’, all of other dial number is not matter. 4) Common CO & LCO CO Board is used in that Site. 2) Administrator want to make user seize PRI CO, if outgoing dial number start from ‘1’ for charging. 3) Without number Seize Dial Number is ‘9’ Dial Tone Digit Table System Specific Items

2. Make Digit Conversion number from ‘91’ to ‘802’ 1. Set the digit conversion rule at Digit-Conv. Table. 3. Assign Dummy Dial Number ‘9’ 1. Assign Digit number ‘9’ for Dummy Dial Tone at Dummy Dial-Tone Digit Table. 4. When User press dial ‘9’, then user always can hear Dummy-Dial Tone. Dial Tone Digit Table System Specific Items

- MG System support two-type of Executive/Secretary Service. 1) with DN Numbering Scheme 2) with Assignment Executive/Secretary Scheme. - In Executive/Secretary Assignment table, Max 48 rules can be supported. - Each Executive can has 3 Secretaries, and also ICM/CO call answer rules can be defined. - all Executives can have the authority to access between other Executives. Executive/Secretary Assignment PGM241 ICM call Rule Co call Rule Executive Call Case Secretary Call Choice Executive / Secretary System Specific Items

- MG System support Remote access Method from other network area by PPTP. - Administrator can make 4 PPTP rules to access from public outside area. Private Network Zone Internet Private IP Private IP Public IP Public IP Outside PC can not access to MG system with only IP In that case, if PPTP function is set, MG system try to make PPTP connection to outside PC. And then tunneling connection will be established between PC and MG system. After connection outside PC user can control MG system by Web Admin PPTP Access System from Remote PC System Specific Items PPTP Connection Request 1. By ATD(PGM+0+8+4)PPTP Connection 2. By CLI(PPTP Service CLI)

- MG System can disable the power of a Digital Phone or SLT installed in the DTIB/SLIB/DSIU at night or during holiday mode. -The power On/Off can be controlled by Web Admin manually or automatically according to the assigned power On/Off time. - Green mode applied Board : DTIB 12/24, SLIB 12/24 DKTs in 1 st DTIB Board Can be power off during Night DKTs in 2nd DTIB Board Can not be used Power Save SLTs in SLIB Board Can be assigned power off rule only during holiday Administrator can assign each board to off power defined Time Green Mode (Power Saving) System Specific Items

Green Mode Activation (Only Web-Admin) Administrator can assign each board individually Manual Power On/Off Button Green Mode Time Setting (Only Web-Admin) Administrator can assign Power Off Start Time and Power On Start Time. These time rule can be defined by day of the week. Green Mode (Power Saving, WEB-Admin) System Specific Items

- All kinds of Tone and Ring can be changed by Web-Admin. - Tone information is described as Tone-Table and all cases of Tone is defined at PGM Ring information is described as Ring-Table and all cases of Ring is defined at PGM 265. Tone-Table PGM 290Ring-Table PGM 265 MG Tone & Ring

- 74 kinds of Tones in a table are defined. - Each Tone has 14 kinds of Tone-Type. ( Normal, Prompt, Announcement, Int-MOH, Ext-MOH, 4-VMIB MOH, 5-SLT MOH ) - Each Tone will be played during assigned Tone-Time. - If Tone Type is Prompt or Announcement, recorded message will be played at Prompt/Annc. No. - If Tone Type is VMIB or SLT MOH, assigned MOH will be played at Music Source Admin PGM If Tone Type is Normal, assigned Tone Port(Tone Source) will be played. This Tone Port(Tone Source) is defined at Tone Frequency/Cadence Table PGM 264. Tone-Table PGM290 Tone Type Tone – Organization (Tone Table) Tone & Ring

- Internal MOH and VMIB MOH and SLT MOH can be assigned at Music Source Admin PGM In case of Internal MOH, system can support 13 fixed Music. - In case of VMIB MOH, MAX 4 MOH channel can be supported. But Each VMIB /AAIB board only have one MOH. - In case of SLT MOH, any SLT port can be assigned for SLT MOH. Music Source PGM229 Installed VMIB/AAIB Slot will be displayed in order. Administrator can assign only one Message for MOH per each Board. Tone – Organization (Music Source) Tone & Ring

- There are 19 Tone Port(Tone Source). Each Tone is defined with Frequency and Cadence. - Each Tone Port Frequency can be combined two different Frequency. - Each Tone Port will be played with On/Off Cadence from Cadence info1 to info 4. Tone-Frequency/Cadence Table PGM264 In case of Tone Port 4, 425Hz Frequency Tone will be played. ON Time 100msec. OFF Time 400msec. 425Hz Frequency Tone – Organization (Tone Frequency/Cadence Table) Tone & Ring

Tone Type Normal Prompt Announcement Ex : Error Tone -> applied when user hears error tone Tone Table support different Tone Type, since MG is able to provide different source to specific Tone. Now we will explain case of Normal case. MG will provide Error Tone according with setting of Tone Port freq1-2. Since Repeat value for Tone Port is 255 (means continuously), then Tone will operate according with Tone Time (PGM 290). The Error Tone cadence is 300msec ON/200msec OFF repeat. Tone Type -> Normal Tone Time -> 20s Tone Port -> 1 Used for Cadence Used for ON/OFF Time Unit Tone – Organization (Example) Tone & Ring

- 17 kinds of rings in a table are defined. - Each Ring has 4 kinds of Ring Index. 1) 4 type Ring Index can be decided by User Program 2) User can define [Trans/PGM] 21 for ICM Differential Ring 3) User can define [Trans/PGM] 22 for CO Differential Ring - Each Ring will be played during assigned Ring-Time. - Assigned Ring Index Number (Ring Source) is defined at Ring Frequency/Cadence Table PGM 266. Ring-Table PGM 265 Ring – Organization (Ring Table) Tone & Ring

- There are 15 ring Index (Ring Source). Each Ring is defined with Frequency and Cadence. - This Table format is same as Tone- Frequency/Cadence Table. Ring-Frequency/Cadence Table PGM266 In case of Ring Index 2, combined Ring with 1000Hz Frequency and 1020Hz Frequency, will be played. ON Time 400msec. OFF Time 2sec. 1000Hz & 1020Hz Frequency Combined ON Time 400msec. OFF Time 2sec. Ring – Organization (Ring Frequency/Cadence Table) Tone & Ring

Ex : Intercom Ring -> applied when station gets intercom ring Ring Table support different Ring Type, since MG is able to provide different source to specific Ring. Now we will explain the ring scheme. Used for ON/OFF Time Unit Used for Ring Cadence Used for ICM Differential Ring. It can be selected by station program (PGM 21) MG will provide Intercom Ring according with setting of Ring Index freq1-2. Since Repeat value for Ring Index is 255 (means continuously), then Ring will operate according with Ring Time (adm265). When Ring Time expire, the Intercom Ring is stop and caller hears Error Tone. The Intercom Ring cadence is 800msec ON/2.4sec OFF repeat. Ring – Organization (Example) Tone & Ring

ISDN Attribute PGM 300 Administrator can define ISDN Data CRC Check TE / NT Mode BRI PROT Layer-2 TEI Mode ISDN Clock Priority PGM 301 Administrator can define ISDN Clock Priority MG System can control Clock Signaling by Web Admin against LDK system Series ISDN Board Setting ISDN, VOI, & VMI Board Attributes

VOIB / VMIB Attribute PGM 305 External Port Board IP Address IP Board Specific Attributes. VOIB / VMIB Board Setting ISDN, VOI, & VMI Board Attributes