ABLOY® Padlocks security grades according to EN12320 Test report

EN12320 & ASTM F883 test requirements SHACKLE PULLING Grade Product EN 12320 Force F2 ASTM F883 In Kg Above requirement * 1 PL320 / 50** 3 KN 225 lb 300 Kg EN (200 %, 600 Kg) ANSI (800 %) 2 PL320 5 KN 560 lb 500 Kg EN (400 %, 2000 Kg) ANSI (900 %) 3 PL330 15 KN 1125 lb 1500 Kg (Car) EN (66,7 %, 1000 Kg) ANSI (400 %) 4 PL340 PL342 30 KN 2000 lb 3000 Kg EN (50 %, 1500 Kg) 5 PL350 70 KN 4500 lb 7000 Kg (Lorry, Bus) EN (35,7 %, 2500 Kg) ANSI (375 %) 6 PL362 100 KN 9000 lb 10 000 Kg (HORNET F/A18 Fighter) EN (0 %) ANSI (150 %) Shackle is fixed and ram push the body downwards. * Tested in Abloy® Joensuu factory laboratory ** No certificate available

EN12320 & ASTM F883 test requirements SHACKLE TWISTING Grade Product EN 12320 Torque M3 ASTM F883 Torgue M3 Kg Above requirement * 1 PL320 / 50*** 40 Nm - 4 Kg EN (0 %) 2 PL320 100 Nm 10 Kg 3 PL330 200 Nm 20 Kg EN (45 %, 9 Kg) 4 PL340 PL342 450 Nm 45 Kg EN (31,1 %, 14 Kg) 5 PL350 1200 Nm 120 Kg EN (8,3 %, 10 Kg) 6 PL362 2500 Nm 250 Kg EN (**), ??? Kg * Tested in Abloy® Joensuu factory laboratory ** Not possible to measure (Shackle secure structure) *** No certificate available

EN12320 & ASTM F883 test requirements SHACKLE CUTTING F3 / Kg EN Grade Product EN 12320 Forcee F3 ASTM F883 Force F3 Kg Above requirement * 1 PL320 / 50** 6 KN 1000 lb 600 Kg EN (166,7 %, 1000 Kg) ANSI (263,6 %) 2 PL320 15 KN 2000 lb 1500 Kg (Car) EN (6,7 %, 100 Kg) ANSI (77,8 %) 3 PL330 25 KN 3000 lb 2500 Kg EN (52 %, 1300 Kg) ANSI (181,5 %) 4 PL340 PL342 35 KN 4000 lb 3500 Kg EN (31,4 %, 1100 Kg) ANSI (155,6 %) 5 PL350 70 KN 7000 lb 7000 Kg (Lorry, Bus) EN (28,6 %, 2000 Kg) ANSI (190,3 %) 6 PL362 100 KN 10000 lb 10 000 Kg (HORNET F/A18 Fighter) EN (0 %) ANSI (122,2 %) * Tested in Abloy® Joensuu factory laboratory ** No certificate available

EN12320 & ASTM F883 test requirements CYLINDER PULLING (Load on cylinder plug or locking mechanism) Grade Product EN 12320 Force F1 ASTM F883 Kg Above requirement * 1 PL320 / 50** - 225 lb 100 Kg ANSI (900 %, 900 Kg) 2 PL320 337 lb 150 Kg ANSI (566,7 %, 850 Kg) 3 PL330 4 KN 450 lb 400 Kg EN (400 %, 1600 Kg) ANSI (900 %) 4 PL340 PL342 5 KN 675 lb 500 Kg EN (400 %, 2000 Kg) ANSI (733,3 %) 5 PL350 10 KN 1350 lb 1000 Kg EN (150 %, 1500 Kg) ANSI (316,7 %) 6 PL362 15 KN 2700 lb 1500 Kg (Car) EN (166,7 %, 2500 Kg) ANSI (233,3 %) Shackle removed if neccessary F1 / Kg * Tested in Abloy® Joensuu factory laboratory ** No certificate available

Measured value 10 Nm (88,5lb-in) before tool breakage EN12320 & ASTM F883 test requirements TORQUE RESISTANCE OF CYLINDER PLUG EN Grade Product EN 12320 Torque M2 ASTM F883 Kg Above requirement * 1 PL320 / 50** - 89 lb-inch 1,0 Kg Measured value 10 Nm (88,5lb-in) before tool breakage 2 PL320 2,5 Nm 133 lb-inch 0,25 Kg 3 PL330 5 Nm 177 lb-inch 0,5 Kg 4 PL340 PL342 15 Nm 221 lb-inch 1,5 Kg 5 PL350 20 Nm 266 lb-inch 2,0 Kg 6 PL362 30 Nm 310 lb-inch 3,0 Kg M2 Kg 1m * Tested in Abloy® Joensuu factory laboratory ** No certificate available

ABLOY® Products fulfill EN12320 demands EN12320 & ASTM F883 test requirements IMPACT RESISTANCE: BLOW ON LOCK BODY / SHACKLE EN12320 Grade Product Temperature Blows (n) Height (h) Mass (m) 1 PL320 / 50** - 2 PL320 3 PL330 -20 °C 5 0,8 m 1,25 Kg 4 PL340 PL342 1,0 m 3,05 Kg PL350 -40 °C 1,4 m 6,55 Kg 6 PL362 1,5 m 7,15 Kg ASTM F883 PL320 / 50 1,0 Kg 2,0 Kg 3,0 Kg 4,0 Kg 5,0 Kg 6,0 Kg m h ** No certificate available ABLOY® Products fulfill EN12320 demands

EN12320 test requirements DRILL RESISTANCE Grade Drilling net time Max. number of different drills Drill change time included to test net time Max. drill diameter Drilling Force F Without shock effect 4 2 min 3 pcs 15 sec. 12 mm 300 N (30 kg) 5 4 min (30 Kg) 6 8 min FINAL TEST Time attempt to open the product for example with paper clip, pliers, screwdriver under 150 mm long, will be included to the test net time. Product should not open or test has failed.

EN12320 test requirements SAWING RESISTANCE Grade Sawing net time Stroke length Stroke cycles per minute Sawing load F5 Blade force against product Blade change time Included to test net time 4 2 min 165 mm 60 pcs 300 N (30 Kg) 60 sec. 5 4 min 6 8 min FINAL TEST Time attempt to open the product for example with paper clip, pliers, screwdriver under 150 mm long, will be included to the test net time. Product should not open or test has failed. Saw blade according French standard NF E 73-072 Blade tension 1 KN

Padlocks BRASS PADLOCKS: PL321 PL343 PL320 PL341 PL330 GRADE 2 GRADE 3 Discontinued PL320 PL341 GRADE 2 PL330 GRADE 3 GRADE 3

Padlocks STEEL PADLOCKS: PL362 PL340 PL342 PL350 GRADE 6 GRADE 5

PL362; THE STRONGEST PADLOCK IN THE WORLD Padlocks PL362; THE STRONGEST PADLOCK IN THE WORLD GRADE 6

Accessories ADVANCED FEATURES: New design Coding Chamfers Attachment chains Dust covers for whole range

Accessories, locking plates 12 mm shackle hole Non-handed For frame fixing Zinc-plated, polyester coated Case-hardened steel Fixing screws included PL200, 202: 12 mm shackle hole CEN grade 3 PL200 for right handed doors PL202 for left handed doors For frame fixing Zinc-plated, polyester coated Case-hardened steel Fixing screws included PL201, 203: 18 mm shackle hole CEN grade 4 PL201 for right handed doors PL203 for left handed doors For frame fixing Zinc-plated, polyester coated Case-hardened steel Fixing screws included

EN12320 CERTIFICATES 6 5 4 3 2 EN GRADE 1 PRODUCTS PL362 PL350 PL342 3020 PL320 PRODUCTS