Date: File: PRO1_17E.1 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Solutions (Version A)

Date: File: PRO1_17E.2 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Creating a Project

Date: File: PRO1_17E.3 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Inserting an S7-Program

Date: File: PRO1_17E.4 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Inserting an S7-Block

Date: File: PRO1_17E.5 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: CPU Memory Reset

Date: File: PRO1_17E.6 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Selecting the Mnemonics

Date: File: PRO1_17E.7 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Opening and Editing FC 1

Date: File: PRO1_17E.8 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Changing the Programming Language

Date: File: PRO1_17E.9 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Saving FC 1

Date: File: PRO1_17E.10 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Downloading a Block into the PLC

Date: File: PRO1_17E.11 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Calling FC 1 in OB 1

Date: File: PRO1_17E.12 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Testing FC 1 (in LAD)

Date: File: PRO1_17E.13 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Expanding the Program in the FC 1 Block

Date: File: PRO1_17E.14 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Normally Open and Normally Closed Contacts Task: In all three examples the light should be on when S1 is activated and S2 is not activated! I 1.0I 1.1Q 4.0I 1.0I 1.1Q 4.0 AI 1.0 ANI 1.1 =Q 4.0 Q 4.0 I 1.0 I 1.1 & Q 4.0 I 1.0 I 1.1 & Q 4.0 I 1.0 I 1.1 & AI1.0 AI1.1 =Q 4.0 ANI 1.0 AI 1.1 =Q 4.0 Software I1.0 S1 I1.1 S2 I1.0 S1 I1.1 S2 I1.0 S1 I1.1 S2 Q 4.0 Programmable controller Light Q 4.0 Programmable controller Q 4.0 Programmable controller FDB STL LAD Hardware I 1.0I 1.1Q 4.0 I 1.0I 1.1I 1.0I 1.1 I 1.0 I 1.1

Date: File: PRO1_17E.15 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Program for a Bottling Plant (Mode Section)

Date: File: PRO1_17E.16 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Timers T4 S_PEXT S TV R BI BCD Q I 0.7 S5T#5s I 0.5 Q 8.0 I 0.7 I 0.5 Q8.0 T4 S_PULSE S TV R BI BCD Q I 0.7 S5T#5s I 0.5 Q 8.0 I 0.7 I 0.5 Q8.0 5s T4 S_ODT S TV R BI BCD Q I 0.7 S5T#5s I 0.5 Q 8.0 I 0.7 I 0.5 Q8.0 T4 S_ODTS S TV R BI BCD Q I 0.7 S5T#5s I 0.5 Q 8.0 I 0.7 I 0.5 Q8.0 I 0.7 I 0.5 Q8.0 T4 S_OFFDT S TV R BI BCD Q I 0.7 S5T#5s I 0.5 Q 8.0

Date: File: PRO1_17E.17 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Program for a Bottling Plant (Filling Cycle and Bottle Count)

Date: File: PRO1_17E.18 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Program for a Bottling Plant (Production Data)

Date: File: PRO1_17E.19 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise : Program for a Bottling Plant (Number of Packaging Units)

Date: File: PRO1_17E.20 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Creating a Symbol Table for FC 15

Date: File: PRO1_17E.21 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Monitoring and Modifying Variables

Date: File: PRO1_17E.22 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Modifying Variables in the Stop Mode

Date: File: PRO1_17E.23 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Using Trigger Points for the Modify Variables Function (Q 4.6) Additional network in OB 1 of the S7 program "My Program"

Date: File: PRO1_17E.24 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Forcing

Date: File: PRO1_17E.25 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Combining Program Status and Monitor Variable

Date: File: PRO1_17E.26 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Program for a Bottling Plant - Data Storage (1)

Date: File: PRO1_17E.27 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Program for a Bottling Plant - Data Storage (2)

Date: File: PRO1_17E.28 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Using Local Variables

Date: File: PRO1_17E.29 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Editing a Parameter-assignable FC

Date: File: PRO1_17E.30 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Calling a Parameter-assignable FC

Date: File: PRO1_17E.31 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Editing a Function Block

Date: File: PRO1_17E.32 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Calling a Function Block and Testing It

Date: File: PRO1_17E.33 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Recognizing Types of Variables AbsoluteSymbolic X X X X X X X TemporaryStaticParameter X X X X X L#Number_1 T#Max_value TMW 40 Statement L#Number_2 L#Intermediate_result LNumber_1" T#Number_2 Global X X Local X X X X X

Date: File: PRO1_17E.34 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Finding Stop Errors and Eliminating Them Incorrect -> Correct InstructionLocation Error CALL FC 30 -> CALL FC 23OB 1, Network 51T DB4.DBW 2 -> T DB5.DBW 2FC 23, Network 22T DB5.DBW 40 -> T DB5.DBW 4FC 23, Network 33L PIW 362 -> L PIW 352 ( L PIW 304 )FC 20, Network 14

Date: File: PRO1_17E.35 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Troubleshooting with I Stack, B Stack Error 1QuestionsError 2Error 3 FC 100, NW 2 BTI In which block and at which instruction did the error occur? FC 101, NW 2 OPN DB[MW 30] FC 102, NW 2 BCD conversion errorWhat is the cause of the error? Incorrect block number at OPN DB I/O access error, writing OB 1, FC 100 Which blocks were executed up to the error? OB 1, FC 101OB 1, FC 102 Accu 1: 8A Accu 2: 5 Which values were in the accumulators at the error location? Accu 1: 80 Accu 2: 5 Accu 1: 4868 Accu 2: CAFE No valid BCD number in Accu 1 Why did the error occur? Incorrect DB number in MW 30 Incorrect I/O address DB 104 Which data blocks were open? ---

Date: File: PRO1_17E.36 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Eliminating Logical Program Errors Incorrect -> Correct InstructionLocation Error A Q 8.1 -> A Q 8.0FC 15, Network 21= Q > = Q 20.6FC 15, Network 52A I > A I 16.6FC 16, Network 13>R -> <RFC 20, Network 24L 0 -> L 6FC 19, Network 15

Date: File: PRO1_17E.37 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Enabling Diagnostic Messages

Date: File: PRO1_17E.38 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Outputting User Messages

Date: File: PRO1_17E.39 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Enabling Diagnostic Interrupts and Simulating Hardware Faults

Date: File: PRO1_17E.40 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Reading Out System Information

Date: File: PRO1_17E.41 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Reading Out and Adapting the Actual Configuration

Date: File: PRO1_17E.42 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Assign Parameters to Clock Memory and Test It

Date: File: PRO1_17E.43 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Determing type of Startup in OB 100

Date: File: PRO1_17E.44 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Setting the System Time

Date: File: PRO1_17E.45 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Creating a Flashing Light with Cyclic Interrupt

Date: File: PRO1_17E.46 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Writing a Program for a Time-of-Day Interrupt

Date: File: PRO1_17E.47 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Assigning Parameters to the Analog Module SM335

Date: File: PRO1_17E.48 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Assigning Parameters to the Analog Module SM331

Date: File: PRO1_17E.49 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Controlling the Level in a Tank

Date: File: PRO1_17E.50 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Diagnostic Interrupt from an Analog Module

Date: File: PRO1_17E.51 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Achiving a Project

Date: File: PRO1_17E.52 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Preparing for Communication Training Area 2 Node No.: Station 2 CPU-MPI address:3 Node No.: Station 1 CPU-MPI address:2 Training Area 1

Date: File: PRO1_17E.53 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Configuring Global Data Communication

Date: File: PRO1_17E.54 SIMATIC S7 Siemens AG All rights reserved. Information and Training Center Knowledge for Automation Exercise: Monitoring Variables in Several Stations