RSA6000 Series Spectrum Analyzer Fact Sheet Instant insight and discovery of unseen phenomena Discover, Trigger, Capture, Analyze Discover design issues other spectrum analyzers will miss FeaturesBenefits DPX® Live RF spectrum displayDiscover previously unseen signal behavior. Improve test confidence and catch very short duration transients missed by conventional spectrum analyzers. Triggering expertiseSave time by isolating signal anomalies that other instruments can’t even trigger on. Isolate hard to find hardware and software anomalies with cross domain triggering between multiple instruments. Seamless data captureObserve the entire duration of signal events, like frequency hopping sequences, PLL settling times, turn on transients, and multiple pulses. Multi-domain time correlationAccelerate troubleshooting and analysis by pinpointing the root cause of problems in multiple domains. Analyze captured data in any/all domains at any time with correlated markers. Automatic pulse measurement and detectionSimplify test and save test time with multiple measurements on the same captured data. Reduce cost of test with a versatile single instrument that replaces multiple test sets. Featuring:  High-performance spectrum and vector signal analysis with +20 dBm TOI and -151 dBm/Hz DANL  Discover the unexpected with DPX® Live RF displaying > 292,000/s spectrum updates and the revolutionary Swept DPX over the full instrument span  Trigger on transient signals with DPX Density™, frequency mask, runt and time-qualified triggers to capture events as brief as 10.3 µs  Capture a seamless time record of RF frequencies into deep memory for up to 1.7 s acquisitions at 110 MHz bandwidth  Analyze complex RF signals with time- correlated multi-domain measurements with up to 5 automatically correlated markers

Key Specifications and Ordering Information 2/11 JS/WWW 37W © 2011 Tektronix RSA6000 Series Spectrum Analyzer Fact Sheet Models Frequency Range Bandwidth Minimum Event Duration for 100% POI SFDR (typical) RSA6106A9 kHz to 6.2 GHz 40 MHz std; 110 MHz opt. 31 μs 24 μs (Opt. 200) 10.3 μs (Opt Opt. 200) -78 dBc -75 dBc (Opt 110) RSA6114A9 kHz to 14 GHz 40 MHz std; 110 MHz opt. 31 μs 24 μs (Opt. 200) 10.3 μs (Opt Opt. 200) -78 dBc < 6.2 GHz -75 dBc for > 6.2 GHz -75 dBc (Opt 110) RSA6120A9 kHz to 20 GHz 40 MHz std; 110 MHz opt. 31 μs 24 μs (Opt. 200) 10.3 μs (Opt Opt. 200) -78 dBc < 6.2 GHz -75 dBc for > 6.2 GHz -75 dBc (Opt 110) Recommended Accessories RTPA2A Analyzer Probe Adapter Supports TekConnect probes P7225, P7240, P7260, P7330, P7313, P7350, P7350SMA, P7380, P7380SMA RSAVuSoftware based on the RSA3000 Series platform for analysis supporting 3G wireless standards, WLAN, RFID, Audio Demodulation, and more measurements RSAIQWIMAX WiMAX and e standards support RSALTE3GPP Release 8 LTE standards support Additional Removable HD Additional Removable SSD Transit Case Rackmount Retrofit xxAdditional Quick-start Manual (Paper) xx Service Manual (Paper) IndustryKey Applications  Radar  Transmitter Test  Pulse characterization  RF debug  Electronic Warfare  Discover signals of interest with Swept DPX and DPX Density™ trigger  Capture real-time data for playback  Automatic pulse measurements  Spectrum Management  Signal search in real-time bandwidth to 110 MHz  Swept DPX and DPX Density™ trigger over full instrument span  Radio Communications  Transmitter test  RF debug  Modulation analysis Key Options Opt. 01 Internal Pre-amp (10 MHz - 3 GHz) Opt. 021 GB memory, Frequency Mask Trigger Opt. 05Signal Output: 500 MHz IF, Digital IQ Opt. 06 Removable HDD* Opt. 07 DVD-RW* Opt. 08 Removable SSD* Opt. 11 Phase Noise and Jitter Measurement Opt. 12 Settling Time Measurements Opt. 20 Advanced Signal Analysis Opt. 21 General Purpose Digital Modulation Analysis Opt MHz Real-time Acquisition BW Opt. 200 Advanced Triggers and Swept DPX Opt. 1R Rackmount Opt. R5 5 year repair service plan Opt. C3/C5 3 or 5 year calibration service plan * Only one of Opt. 06, 07, or 08 can be ordered