귀사의 완제품에 대한 최상의 부품공급 !! 및 각종 후처리공정

주철주조라인 ( 자동 ) 몰딩공정 자동주조공정 쇼트 블래스트 더 나은 표면을 위해서 V-Process 라인을 사용할 수 있습니다. 최상의 품질과 합리적인 가격이 여러분의 결정을 기다리고 있습니다.

V-Process Line V-Processor Shot Blast 최상의 표면처리 !! 최상의 품질 !! 1. Pattern Pattern Plate is placed on the suction box. Vent holes are made through pattern to the cavity of suction box. 2. Film Heating Thin( mm) EVA film with high elongation and plastic deformation ability is heated and softened by heater. 3. Film Forming Softened plastic film is drawn tightly around the pattern by suction applied through vent holes. 4. Mold Washing Mold coating (refractory filler solvent) is sprayed on the film. 5. Flask Setting Flask is placed on to the film – covered pattern. Flask walls have suction chambers with suction filter pipes connected to them. 6. Sand Filling Flask is filled with fineness – controlled, dried and unbonded sand. Slight vibration compacts sand. Then back of the mold is scrapped. 7. Film Sealing Back of the mold is covered with unheated thin (0.02~0.05mm) PE film 8. Pattern Striping Suction is applied into the flask. Then atmospheric pressure hardens the mold. When the mold is stripping from the pattern, suction is released by air-introducing into the chamber of suction box. 9. Pouring Cope and drag molds are assembled together. During pouring, the mold is kept under suction. 10. Releasing The molding sand flows away from the casting easily when suction is released. Return sand is cooled for reuse.

Various Experience in the field of Automobile Customers : -Hyundai Motor Company -Kia Motors -Hyundai Heavy Industries & Machinery Co. Ltd. -Daewoo Heavy Industries & Machinery Ltd. -Halla Climate Control Corporation -LG Industrial System -GKN Automotive -Javico LTD. -The Victaulic Co., of Japan LTD.

Various Experience in the field of Forklift Kang Han Corporation is currently producing many kinds of parts including Axel Beams & Knuckles for Heavy Industry. We produce a variety of heavy equipment, which can weigh up to 5 tons.

Various Experience in the field of Robot Parts We meet the requirements of high quality cast-iron materials, which are needed in the high-tech robot industry. Thus, Kang Han’s goods have neat surface and precision, coordinating with the newly rising robot industry. Moreover, Kang Han fulfils the desire of customers in this area.

Various Experience in the field of Gas Control Industry Pneumatic, Gas, Oil, and Water Industry always concern the voids and porosities to avoid leak Problems. Kang Han Co. has a lot of experience to control the porosities & voids. Also to prevent the corrosion Kang Han has some good finished process as zinc phosphate, etc. To prevent invisible porosities Kang Han serves some good finished process as impregnation. For more service please do not hesitate to ask our facilities to solve the problems.

Just contact! The best is waiting for you! Just Feel The Better Quality with The Better Price. When you are competing, the prime cost & the quality can give you the better opportunity. Kang Han’s basic motto is ‘make our buyers be rich’! Just feel the differences that we have. 본사 주소 : 서울시 강서구 화곡 5 동 호 2 층 Tel : (02) Fax : (02) 한국 공장 : 경기도 김포시 통진군 중국 공장 : 중국 산동성 평도시 중국 법인 ( 청도강한진출구 유한공사 ) : 중국 산동성 청도시