Period 8Gary Clements1 How to do an oil change Gary Clements 35154 Period 8.

Slides:

Advertisements

Similar presentations

Advertisements

The primary learning outcomes desirable from this lesson are as follows: 1)Become knowledgeable concerning the various types of vehicle insurance and.

Starter Solenoid Contacts Replacement Sherco Automotive Supply

C230 Kompressor Oil Change Procedure

CHAPTER 45 Engine Lubrication.

JACKS & LIFTING DEVICES JACK STANDS

Motor number located on the clutch housing.

Cooling System Service CS6 NATEF Task A.1 D.7 By Vance Bloom.

REMOVE AND INSTALL THERMOSTAT AND TEST OPERATION CS4 A.1 D.6 P-5/6.

Changing the Oil in a 2006 Mitsubishi Eclipse. Introduction Changing the oil in your 2006 Mitsubishi Eclipse is easier than you may think. With a few.

Basic Automotive Care Oil, Transmission Fluid, Brake Fluid, Power Steering Fluid, Radiator Coolant, Tires.

Tools and Functions R7AxwS3BnU.

Representor: Yoo D. Moon Date : November 25, 2008.

Here is the broken line. Step 5: Break loose encasing seal. With bar in vice as show, hit with hammer to break loose. Usually 2 or 3 hits will break loose.

Mr. Jody Hannan Automotive Technology.  Topic- This presentation will give students knowledge of emergency car repair. We will explore how to change.

Split steering gaiter (nearside) this is an MoT failure.

Presented by: Ginnette Clark Terri Hall Robert Ishmael Michael Petry.

Salk Institute Mobile Lab Gel Electrophoresis Teacher Instructions VWR Set Up 12 groups Mira Costa kit.

Model 12 Intek Horizontal OHV

PowerPoint presentation to accompany Heizer/Render – Principles of Operations Management, 5e, and Operations Management, 7e © 2004 by Prentice Hall, Inc.,

How to Change Your Oil By: Sam Wallace. Overview Introduction (Importance) When? Tools Required Changing the Oil Clean Up.

Ana Parise ENGL 393.  Checking a car’s oil is essential to keeping it maintained properly.  The purpose of checking the oil is to keep the car functioning.

New Mexico FFA Agricultural Mechanics Career Development Event Plumbing.

Click on different boxes to learn more

1 Oil spills By: Nick Rivera 1. 2 Big question What will be the best sorbent to absorb oil??? I am doing this research to find a better way to clean up.

How to Change Your Oil By Ben Wirjosemito. Materials Gather all materials Having them close by is important Oil pan, funnel and socket wrench Newspaper/cloth.

Step 1 Park vehicle on a level surface then engage the parking brake and turn off engine. If you cannot comfortably get under the car, raise the front.

CARBURETED FUEL SYSTEM

ENGINE CLEAN OIL TOOL OIL RX • 999 TRAINING

How To Replace Your Fuel Filter On a 1998 Mustang GT.

1 Routine Preventative Maintenance. 2 to maximize the fuel economy & longevity of a vehicle and minimize breakdowns, maintenance should be performed regularlyto.

Cooling System Service CS6 NATEF Task A.1 D.7. O BJECTIVE Student will inspect, test and flush cooling system.

Changing your car's oil yourself is not only a money saver—it’s also a lot easier than it sounds! By Rachel Ammann ENGL 393.

4 Chapter Power Tools and Equipment.

PRE s ENT TO TRANSFER CASE WORK…….. ALL TO THE GEAR BOX……. -MAINTAINANCE….. -CHANGING OIL GEAR BOX…. -CHECKING OIL GEAR BOX……

Getting Ready Gather tools, oil and filter. If you plan to change your oil regularly, consider investing in jack stands, a socket set and an oil drain.

LAB #9 Valve Head replacement. Insert the valve. Make sure that the cap goes on the intake valve. Insert the springs. Insert the keeper.

LAB #7 Reassembly. Get Check Off Sheet Before you start, make sure you get a reassembly packet from Mrs. Winegar. If you do not have her check your work.

Motorcycle gas tank rust removal & sealing Notes: 1.These are suggested instructions 2.Only applicable to steel gas tanks 3.Sealer won’t work on plastic.

LAB #10. Governor Control Arm Using a 10mm socket install the two bolts that hold the governor control arm. Finger tighten then torque to 100 “#

THEESTROGEN GARAGE GARAGE An introduction to motorcycle maintenance for the Ladies.

Model 12 Intek Horizontal OHV

HOW TO CHANGE OIL IN A CAR

© Goodheart-Willcox Co., Inc.. Power Tools and Equipment  Power tools  tools driven by compressed air, electricity, or pressurized liquid  Shop equipment.

Write down three safety rules we talked about in the past few days. Talk with someone near you and see how many ways are out there to lift a car for service.

Presented by: Timothy Wheeler December 4 th, 2008 ENGL393, Mrs. Harris.

By Victor Moctezuma. Have you Ever?  Have you ever been driving comfortably in your car listening to your favorite jams, when all of a sudden one of.

(4) The student knows the functions and applications of the tools, equipment, technologies, and materials used in automotive services. The student is.

How to Install a New Car Starter By Cole Johnston In this slideshow you will learn how to properly and safely install a new car starter.

Alyssa,Ben,Mike &Tyler.  These instructions are intended for anyone whose vehicle has a flat tire and wishes to change it themselves, but is unfamiliar.

 A car Jack  A wrench  A flat surface Put the car into park and apply the parking brake.

6 Things Every Driver Should Know. 1) How to Change a Tire 1 st : Once you have a flat, stop at a SAFE place to change your tire. 2 ND : Grab the spare,

Routine Preventative Maintenance

Oil Change Christchurch

Routine Preventative Maintenance

Service Procedure For Changing Engine Oil And An Oil Filter

MODEL: WC SWEEPER SCRUBBER DOCUMENTED BY: Brett Sprietler PAGE NUMBER: 1 DATE: 11/20/ Place (1) HOSE IMPELLER TO TANK ( )

Servicing the Steering System

Gel Electrophoresis Teacher Instructions BioRad Set Up 12 groups

Most Effective Procedures to Repair a Brake Booster.

How to Change a Flat Tire

CHAPTER 45 Engine Lubrication.

Engine Oil Changes.

Engine Oil Changes.

W201 3R hardboard Replacement Procedure.

Changing Oil and an Oil Filter

Lubrication System.

References / Documents

Presentation transcript:

Period 8Gary Clements1 How to do an oil change Gary Clements Period 8

Gary Clements2 What you’ll need The car (obviously) Hydraulic car lift Floor jack (if lift isn’t available) Jack stands (if using floor jack) Creeper (if using floor jack and jack stands) New oil filter New oil (amount and type may vary)

Period 8Gary Clements3 What you’ll need (pt.2) Ratchet (probably 3/8 but size may vary) Socket (size will vary) Oil filter wrench Funnel Drain pan (or another place for the old oil to spill out) Place to dump oil (do not use sink or any

Period 8Gary Clements4 directions First raise the vehicle high enough to stand under (or for a creeper to fit under it with enough room to work with) Put drain pan in place so it will catch the oil Find oil pan and unscrew oil plug so that the old oil pours out into the pan Wait for all the oil to pour out and put oil plug back

Period 8Gary Clements5 Directions (pt.2) Make sure oil plug is tightened enough and wipe any excess oil off bottom of oil pan Find oil filter and use oil filter wrench to loosen the oil filter (may not be needed if oil filter has black grip on it) Make sure the pan catches any oil that comes out of the oil filter hole and dump contents of oil filter into the pan then place the filter upside down Dip finger in old oil and put a thin layer of oil around the edges of the oil filter

Period 8Gary Clements6 Directions (pt.3) Lower car (if using hydraulic car lift lowering if it’s on jack stands isn’t needed) Find and remove oil cap and put funnel in place Pour oil into funnel (allow time for all the oil in the funnel to go into the oil pan) Replace oil cap and check dip stick add oil if your low

Period 8Gary Clements7 Challenges The oil filter may be difficult to remove without black grip or oil filter wrench You could pour too much oil into the engine You could forget to replace oil cap or oil plug Oil filter may be difficult to find There may be a cover blocking the oil filter (this can easily be removed) May spill oil onto the engine (can be stopped with use of a funnel)