Made in United States of America ZVM Solo EMIT ZVM Solo the most complete monitoring solution on the market

Made in United States of America  Eliminate periodic testing and logging  Instant fault detection  Detects intermittent, low and high resistance faults  Provides supervisors with visual indication of operator grounding Benefits of Continuous Monitoring ZVM Solo

Made in United States of America  Dual-Wire (resistive loop)  Redundant grounding (still grounded if one wire breaks)  Dual polarity technology places positive voltage on one line and negative voltage on the other resulting in near zero voltage at the operator Dual-Wire / Dual-Polarity Technology ZVM Solo

Made in United States of America Superior Features  RS-485 communication for use with EMIT SIM Software  True continuous monitoring  Zero volt technology  Charge detection circuitry  Tool / accessory monitoring  Low profile stainless steel enclosure ZVM Solo

Made in United States of America  Operator test voltages: 50mV or 1.25V  Worksurface limit: 3 ohm or 3 Megohms  Operator charge detect: ±1.25V or ±2.5V User Adjustable Features ZVM Solo

Made in United States of America ON OFF Pulsed technology is off 90% of the time and misses intermittent connections Pulsed only monitors 10% of time ZVM Solo  The ZVM Solo offers true continuous monitoring; pulsed monitors do not  Fastest response time on the market True Continuous Monitoring Pulsed Monitor ZVM Solo

Made in United States of America → Zero Volt Technology ZVM Solo

Made in United States of America Operator Charge Detection  Detects operator voltage charge > ±2.5VDC > ±2.5V ZVM Solo

Made in United States of America Tool Ground Circuit  Monitor just about any tool or accessory ground connection  Alarms at >7 ohms ZVM Solo

Made in United States of America Additional Features  Low profile for convenient mounting under bench tops  Heavy duty hook and loop fasteners included for mounting  Optional stainless steel mounting bracket available ZVM Solo

Made in United States of America  EMIT SIM (Smart Ionization & Monitoring) is software designed to monitor and record the activity of EMIT’s line of Smart Products  This list of products includes:  Zero Volt Ionizer(Bench Top and Overhead)  Zero Volt Monitor(Dual Operator and Workstation)  Zero Volt Monitor Solo(Single Operator and Workstation)  Dual Programmable Monitor  Ultra Low Voltage Monitor  EMIT SIM uses serial number tracking to manage re-calibration schedules for each device  All monitoring is done via a 2 wire serial RS-485 daisy-chained bus. Total cable length of each loop must be less than 1,200 meters (~4,000 feet).  Supported Operating Systems: Windows XP, Windows Vista, Windows 7 (32-bit and 64-bit) What is EMIT SIM? EMIT SIM

Made in United States of America  Unsupervised Reliability  Ionizers and monitors sometimes have alarms which may go unnoticed by the line of workers  EMIT SIM will record and display failures to notify supervisors or engineers when a device needs attention  Eliminates the need to rely on people to physically check the devices every day  Quickly Identify Failure Types  All alarms and exceptions are automatically recorded  Use the logs stored in EMIT SIM to identify any exceptional events that occurred during the assembly of a failed product  Manage Calibration and Maintenance Schedules  Customize your maintenance schedule to automatically display notification when any one group of devices need calibration or maintenance Why EMIT SIM? EMIT SIM “Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements.” (ANSI/ESD S section 7.3)

Made in United States of America Hardware Setup – ZVM Solos Only EMIT SIM

Made in United States of America Hardware Setup – Monitors and Ionizers EMIT SIM

Made in United States of America Need More Information? Contact Vodex Customer Service to schedule a demonstration from your local sales representative. 30-day demo programs are available. Tel: EMIT