Q4X Superior Performance: Reliably detects distance changes as small as 1 mm. − Versatile − Durable − Easy to Use Versatile, Rugged, Distance Laser Sensor

Introducing the Q4X Versatile, Rugged, Distance Laser Sensor

Q4X Key Features ■ Solves difficult distance based applications ■ Reliable mm range, –even on black targets at max range ■ Angled four-digit allows for easy viewing ■ Easy setup using display and push buttons ■ Consistent user menus –LE550, DF-G Series ■ Durable and robust construction ■ FDA grade stainless steel housing ■ Superior ambient light immunity ■ Temperature-compensation for stable detection

Applications Reduce sensor inventory with a reliable, durable sensor that solves even the most challenging applications. ■ Black targets with black backgrounds ■ Gasket detection ■ Multicolored, reflective packages ■ Pharmaceutical cap detection

Black Targets with Black Backgrounds Banner’s Q4X problem-solving triangulation-based laser sensor has no difficulty detecting dark targets on dark backgrounds, on a door panel, when there is a height difference.

Gasket Detect Banner’s Q4X sensor is ideal for presence/absence detection even in challenging applications with small height changes such as confirming a small black target is present on a shiny metal part.

Multi-Colored, Reflective Packaging Multicolored, reflective tea bag packages can easily be detected with Banner’s reliable and durable Q4X laser sensor.

Detecting Pharmaceutical Caps The Q4X is able to verify cap orientation as pharmaceutical caps move down the line into a feeder bowl.

Features: Detection Power Over Entire mm Sensing Range Best in Class Excess Gain 50 ms Response Speed (ms) Excess Gain 25 mm Excess Gain 300 mm

Features: Not Limited by Excess Gain 50 ms

Features: User-Friendly Design ■ Bright output indicator provides high visibility of sensor operation ■ Angled LED Display –4 digit, 7-segment display –Provides clear user feedback for easy setup –Easily viewed from multiple vantage points –Sub-millimeter resolution below 100 mm

Features: Angled 4-Digit display ■ Distance to target displayed in mm ■ Real time display for easy setup and troubleshooting ■ Decimal point ■ LED Indicators –STB = Stability Indicator –Active TEACH Indicators DYN = Dynamic FGS = Foreground Suppression BGS = Background Suppression

Features: Intuitive Setup via Push Buttons Single click button +SELECT- Press to display and increase switch-point; press and hold to increase numeric values rapidly Press to select menu items in Setup mode Press to display and decrease switch-point; press and hold to decrease numeric values rapidly Press to navigate the sensor menu in Setup mode Press and hold for 2+ seconds LO/DOTEACHMODE Press and hold for 2+ seconds to select light operate (LO) or dark operate (DO) Press and hold for 2+ seconds to start the currently selected TEACH mode (the default is two-point) Press and hold for 2+ seconds to enter Setup mode

Features: Construction Durable and Robust Construction ■ Withstands: –Mechanical impact –Over tightening –Extreme vibration –Aggressive cleaning procedures FDA Grade Stainless Steel Housing ■ With: –IP67, IP68, IP69K rating –ECOLAB certification pending –Chemically-resistant materials –Laser marked information

Features: Class 1 Laser Emitter ■ Visible beam for easy setup and alignment ■ Class 1 laser, 655 nm ■ Small Spot size –2.6 mm x mm –2.3 mm x 0.9 mm –2.0 mm x mm

Features: Inputs and Outputs  V dc  Bipolar (PNP & NPN) output  Remote input (disabled by default) - Remote teach - Laser inhibit -Master/slave synchronization -Push button lock

Q4XTBLAF300-Q8 Specifications Sensing BeamClass 1 laser, visible redSupply Voltage10 to 30 V dc Sensing Range25 mm (0.98 in) to 300 mm (11.81 in)IP RatingIP67, IP68, IP69K OutputBipolar (1 PNP & 1 NPN) outputConstructionHousing – 316L Stainless Steel Lens Cover – PMMA Window - Polysulfone Beam Spot Size2.6 x 25 mm 2.3 x mm 2.0 x 300 mm Operating Conditions -10° C to 55° C 35-95% Relative Humidity Excess Gain *High(standard) Response Speed (ms) Excess Gain at 25 mm Excess Gain at 300 mm Certifications (500)*100(50)* (1000)*250(100)* (2500)*500(250)*

Menu Map – Top Menu Sensor Menu – Top Menu  Teach selection  Response speed  Gain and sensitivity  Delay timer  Zero reference location  Shift zero ref. after teach  Input wire function  Display read  Exit setup  Reset to factory default

Menu Map – New Features Delay Timers – On/Off and One-Shot Delays No delay On/off delayOne-Shot Delay When no delay is selected the on/off and one- shot submenus do not appear Enables on or off delays in sensor menu Choose timing in either on or off delay submenus Enables the one shot delay sensor menu Choose timing in one-shot delay menus

Menu Map – New Features Zero Reference Location ■ Use this menu to select the zero reference location. The default is, 0 = the end of the sensor barrel. –Near, 0 = the end of the sensor barrel; the measurement increases further from the sensor –Far, 0 = maximum range; the measurement increases closer to the sensor

Menu Map – New Features Shift the Zero Reference Location after a TEACH ■ Use this menu to select whether the sensor shifts the zero reference location to the last taught distance. The default is off, 0 = the end of barrel or the maximum range. –on: Shift the zero reference location to one of the taught positions with each TEACH –off = the end of barrel or the maximum range, depending on the setting

Menu Map – New Features Input Wire Function ■ Use this menu to select the input wire function. The default is OFF, ignore all remote input pulses. –Ignore all remote input pulses –Remote TEACH input –Laser off when pulled low –Master sync line output for two-sensor cross-talk avoidance –Slave sync line input for two-sensor cross-talk avoidance

Four Never Fail Teach Modes ■ Four teach modes available –Two-point teach (default) –Dynamic teach –One point BGS –One point window (foreground suppression) ■ Sensor will never fail a teach mode –Always sets a switch point –Example: In two-point teach mode, if both conditions are invalid (>300 mm) the sensors switch point will automatically be set at 290 mm –See manual for specific behaviors

Four Teach Modes 2 Point Teach One Point Window (FGS) Two-point TEACH sets a single switch point. The sensor sets the switch point between two taught target distances, relative to the shifted origin location. Dynamic TEACH sets a single switch point during machine run conditions. The switch point is centered between the minimum and the maximum sampled distances. One-point window sets a window (two switch points) centered around the taught target distance. One-Point BGS One-point BGS sets a single switch point in front of the taught target distance. The switch point is set in front of the taught target distance. Dynamic BGS

Q4X Models & Roadmap Q4XTBLAF300-Q8

Accessories: Brackets SMBQ4X… - NEW SMB18FA… SMB18A, $4 Universal bracket for Banner’s Q4X, Q3X, QS18, & QS30 sensors

Accessories: Cordsets Standard Cordsets Washdown IP69K Cordsets – NEW Stainless Steel Coupling Nut

Sales Collateral: Sell Sheet & Technical Literature Quick Start Guide (pn ) ■ 8 pages ■ Basic set up and menu map diagrams ■ Included in box with product Manual (pn ) ■ 28 pages ■ Complete information on programming, performance, troubleshooting, dimensions and accessories ■ Online only Sell Sheet (pn ) ■ 4 pages ■ Selling advantages, applications, and models ■ Electronic and print versions

Sales Resources: Videos & Application Notes Videos  Product video  Cap orientation– 2-pt teach  Cap orientation–FGS  Shiny/black surface detection  Black foam on black plastic  High pressure washdown  Demo video ylist?list=PL7ma8- bsdD0eMOGzOXu_N97- ZMzu02XW Application Notes  Presence/absence  Part orientation  Black foam on black plastic  Shiny package detection  Multicolor package detection

Q4X Summary Key Points to Remember ■ Problem Solver Sensor – mm range, even on black targets –Robust, stainless steel housing –Superior ambient light immunity –Easy to use –Angled 4-digit LCD Display –Easy to view output indicator –Intuitive setup via push buttons ■ Competitive price

Questions