MDS ACCESS CONTROL PROGRAMMING 2 nd International Tech Seminar June 2003

MDS ACCESS CONTROL PROGRAMMING Slide 2 UNIT 2 : MDS ACCESS CONTROL PROGRAMMING Programming software –WINCOM Central Unit parameters Special Decoders parameters –DECOWIN Decoder addresses Digitizer settings PC Registering: WINCOM Interfacing –PC Guard Unit: WinGU –VideoPC Interface: VPC Relays Sensors FERMAX SOFTWARE

MDS ACCESS CONTROL PROGRAMMING Slide 3 –Create Database for an installation –Open the database CreateOpen STARTING TO WORK : STEP 1 UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 4 –Check database selection –Program General Information –Program users (basic) STARTING TO WORK : STEP 2 UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 5 –START connection FXL Remote* Local –Send data to system (*)Note: This option requires a modem connection STARTING TO WORK : STEP 3 UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 6 Button enabled when CONNECTED Button enabled when NOT CONNECTED Central unit version (when CONNECTED) *1: Basic programming data *2: Advance programming data WINCOM version Central unit number (if FXL connection) *1 *2 Central Unit parameters STARTING TO WORK : DETAILS & STRUCTURE UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 7 ACCESS DESCRIPTION DOOR RELAY CONTROLLING DOOR RELEASE & HOW LONG IT WILL BE TRIGGERED (seconds) ALARM RELAY TO TRIGGER WHEN ‘S’ IS DETECTING FOR ‘xx’ SECS FREE ACCESS PERIOD WHEN ENABLED BY ‘UNLOCK’ USER X PIN CODE REQUEST WITHIN THIS PERIOD (USING TAGS & KEYPAD) LETS PARTICULAR SENSOR/RELAY TO BE ENABLED/TRIGGERED A201 ACCESS PARAMETERS UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 8 ACCESS CONTROL RESTRICTIONS UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 9 …… ACCESS CONTROL PARAMETERS UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 10 Access Control for… EXAMPLE UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 11 Step 1: Define areas EXAMPLE UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 12 –Each Zone is defined by access and has an internal counter for special functions STEP 1 : DEFINE AREAS MAXIMUM ROOM CAPACITY RELAY TO ACTIVATE UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 13 STEP 2 : DEFINE ACCESS PARAMETERS UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 14 STEP 3 : DEFINE USER LEVELS UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 15 –3 different time schedules (A,B,C) normally used to differentiate the kind of day –2 start-end periods per each day STEP 4 : DEFINE TIME LEVELS UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 16 –3 periods of holidays –20 individual days STEP 5 : DEFINE HOLIDAYS UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 17 – Restrictions are applied to users through levels STEP 6 : FILL IN USERS’ DATA UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 18 Step 1: Set central unit to register Step 2: Set type of registering Step 3: Display incidences INCIDENCES UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 19 INCIDENCES UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 20 ACCESS DENIED: –F : Holiday –V : Holiday period –Z : Restricted Zone –A : Anti-passback –D : Restricted Day –H : Restricted by time –C : Maximum capacity reached –P : Wrong PIN code. INCIDENCES UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 21 –“Key Violation” : The user that has been introduced already exists, change the user name. It is possible to create 2 users with the same name from the outdoor panel but we will get “Key Violation”message if working with WINCOM. Delete one repeated user. –No call is possible: Cannot scroll the users list in the outdoor panel with the scroll keys or call to an apartment number Check if central unit DC switch is set to ON.(switch no. 3 ) TROUBLESHOOTING UNIT 2 : MDS ACCESS CONTROL PROGRAMMING

MDS ACCESS CONTROL PROGRAMMING Slide 22 –Access denied : If the code length is different from the code field in users table the code will be filled with 0 at the end. It is possible to present the tag to introduce the code instead of typing it. –A user is not allowed to enter due to restrictions but has gained access: Check if the user is defined in the same central unit where the access is connected. If it is not on the same central unit check DC switch (number 3), must be to ON. To ask for restrictions about users from different C.U. Through FXL, DC must be switched to ON. TROUBLESHOOTING UNIT 2 : MDS ACCESS CONTROL PROGRAMMING