Basic Bowl Turning. 1. Draw circle on top of board. 2. Cut to size on band saw. 3. Sand one surface of the bowl and the top o the waste block that is.

Slides:

Advertisements

Similar presentations

Objective Use agricultural mechanics tools properly and safely.

Advertisements

Lathe Quiz Answer the following questions by left clicking the mouse on the appropriate part of the Wood Lathe.

By: Lindsay Myers. Gather wood (cherry, walnut, maple) Plane wood (walnut – 1/8 in, all else – ¾ in) Joint one side of each board Cut boards to width.

The term gluing means to assemble parts with a glue or adhesive.

Adhesives Questions 1)What is the best kind of clamp to use when gluing wood edge to edge? A.Spring clamp B.Bar clamp C.C clamp D.Hand screw clamp.

S J Pens Woodcraft & Penturning How I make my pens.

1 Lathe Safety By: Phil Brooks February 10, 2009 Chicago Woodturners.

Peppermill Demo Bayou Woodturners Demonstrator Jim Shackelford November 2009.

All elements of this presentation are Fair Use and meet copyright laws for educational purposes. This presentation may not be copied, sold, or used for.

Portable Power Tool Safety. Portable Electric and Cordless Drill Be sure the electric drill is disconnected from the power source before installing bits.

S3 Standard Grade C & D Woodwork Machine Tools. Next Slide >< Previous Slide Mr A. Atkinson Circular Saw Machine 1Machine 2 Bandsaw.

Cutting Machines Foldable Information. DRILL PRESS Related Terms  Center punch  Cutting Oil.

By Janice Levi and Bill Berry.  By Janice Levi.

Technology Education Shop and lab safety Band Saw Scroll Saw

Wood Turning Wood turnings are produced on a wood lathe. Various types of turning tools supported on a tool rest are used to produce different shapes.

Both the dome and slab design use a 5 gallon bucket in the middle to be used as a squat hole FINAL MOLD DESIGN.

Chapter 21 Processes Used to Separate Wood Materials.

Turning Belaying Pins for the USS Constellation Restoration Project.

Manufacturing Assembly Plan P Mechanical Spine Test Platform.

TOOL: Radial Arm Saw NEXT STEP: Radial Arm Saw RESULTS: Finish Top Apron Pieces at 9” L x 4” W x ¾ “ Th PROJECT Square Plant Stand PART Top Apron # NEEDED.

Overall Project Objectives You will develop your marking out skills. You will develop your ability to read and follow working drawings Master the use.

Woodworking with Power

Meteorite 101 Cutting, Surface Preparation, Etching, and Preserving Iron Meteorites Prepared for AOAS By Leonard Lynch.

Conversational Forms and Feed Rates

What is a machining Process? Machining is the manufacturing process by which parts can be produced to the desired dimensions and surface finish from a.

I have a problem, my jewellery is all over the place and I have no where to put all the items. I need a box to put,my jewellery in so I don’t loose any.

Learning Objectives To be able to state the different safety precautions associated with the lathe. To be able to identify and state the function of the.

Intro to Power Tools Ag Mech I Class Notes. Objectives AM15.01 Explain how power tools are used in agricultural mechanics. AM15.02 Know and demonstrate.

Rut ‘n’ Strut Game Calls How I turn a Pot Call. Select wood that you want to use to turn Pot Calls out of, Rip it 4” wide and then Crosscut into 4” X.

1. b. Rip Saw 2. d. Used for cutting with the grain.

The Construction of Vertical Evolution Nigel Howe.

Mid Term Review Homework Check – Glue-up – Turning – Band saw.

Proper Use of Agricultural Mechanics Power Tools

F. 1 Design and Technology

Safety Rules for 9 th Grade Shop Radial Arm Saw: Safety Rules Never cut a board that is less than 12 inches long. Always pull the saw using the handle;

Construction of “Curio” style Cabinet by Miguel Del Real.

Left side Right side Note pad Roll block. The Plan.

This is a fold-down clothes bar that will hold up to 12 plastic clothes hangers or even more wire hangers. As I don’t have a trailer wall to put it on,

ANSWERS. For stability / low centre of gravity / to make it heavy / to stop it falling over / so that feet can be attached / ease of manufacture Lower.

12 Steps 1. Wedge 2. Center 3. Drop the hole 4. Check the thickness of base leave ½ inch 5. Undercut base & pull up walls 6. Shape the pot 7. Trim the.

Shop Built Magnetic LED Light Bob Clark Aug, 11, 2011.

Overall Project Objectives You will develop your marking out skills. You will develop your ability to read and follow working drawings Master the use.

TAKE NOTE ON THE ORDER OF PROCEDURE FOR CONSTRUCTION OF THE LAMINATE COUNTERTOP. Countertop Procedures.

Setting up correctly Different types and their use

 Segmented Bowl Senior Woodwork. Overview  Materials and machines  4 step procedure: layout, cutting, laminating, turning.  Final product.

"Cryptex Style" Maze Coin Puzzle

Shaping Materials Theory. Knowledge and Understanding.

NG RNI TU TED MEN SEG BALTIMORE AREA TURNERS November 2016 Ron Ford

Board Replacement for Engineered Glue-Down Pattern Plus with a Premier Performance replacement board.

Global Exotics Board Replacement

Materials SHAPING Shaping Materials Theory.

Proper Use of Agricultural Mechanics Power Tools

THE WOOD AND IT’S DERIVATIVES

Measuring Tools Cutting and Shaping Tools Striking Tools Drill Bits

Picking--- 1 Lecture 3.

St Andrews High School Shaping Wood.

Lathe The size of the lathe is determined by the distance from the live center to dead center. We have a 24” lathe. Dead Center Live Center.

AQA GCSE 2 Working with timber based materials and fixings

Chapter 25 Woodturning.

Woodwork Lathe.

By: Phil Brooks February 10, 2009

Lathe Quiz Answer the following questions by left clicking the mouse on the appropriate part of the Wood Lathe.

Sharpening Turning Tools

Segmented Turning Basics - part 2

Educational Power Point by D&T Within Schools

A lidded box with a snug fitting lid

Presentation transcript:

Basic Bowl Turning

1. Draw circle on top of board. 2. Cut to size on band saw. 3. Sand one surface of the bowl and the top o the waste block that is screwed to the faceplate 4. Use super glue and accelerator to secure bowl blank to waste block. Getting Started

Gouge Round Nose Scraper Radius Scraper Parting Tool Detail Gouge Basic Tools 5. Faceplate mounted, tool rest positioned properly, rotate blank by hand to check clearance before starting lathe. 6. Rough cut to round shape. 7. Shape with round nose scraper. Outside shape complete. Notice tear out on end grain. The next step will remove the torn grain. Start Turning

*Soak bowl with oil finish, that will harden wood fibers and enable a clean cut. *Make light cuts with round nose scraper. You may need to repeat until tear out is completely removed. 9. Sand with 80,120,180, Move tool rest and begin shaping inside of bowl. Use oil on inside of bowl also. Make light cuts with scraper. Then sand. Almost finished bowl. Turning at a higher speed (1600 rpm) will produce cleaner cuts with less tear out. If you cannot remove tear out follow the steps below. Continue shaping inside of bowl.

10. Start on bottom. Use parting tool and cut to small tenon. 11.Cut off with hand saw. This is a glued up block cut round on the band saw that is used to support the bowl so you can shape the bottom. It is made of plywood. 14. Shape and sand. No oil necessary. 13. Center bowl and bring tailstock forward. Apply light pressure. use paper towel between bowl and support. 12. Cut groove the same size of bowl. Support can be used over and over. It can be cut flat with turning tools. Finishing the Bottom – 2 options - 1.The bowl can be taken to the disc sander and sanded flat removing the tenon. Then it can be hand sanded. 2. Make a jig and turn a concave bottom. Follow the remaining steps to turn the bottom. This creates a more professional look to the turning.

Finished Bowl and Happy Wood Turners 15.Use a carving gouge to remove tenon then sand. Not bad for a piece of Poplar.