The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 1 Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [The CQUPT Demonstration System of EGTS Proposal Draft] Date Submitted: [Nov. 17, 2009] Source: [Wang Ping,Wang Heng,Wang Quan, L Li, J. Shen, H.Q. Huang and Betty Zhao] [Chongqing University of Posts and Telecommunications(CQUPT), SIMIT, Huawei, Vinno] Address [No 2, ChongWen Road, Nan’an District,Chongqing,China] Voice:[ ], Re: [IEEE P e] Abstract:A demonstration system for IEEE e/EGTS draft standard developed by CQUPT is introduced, including the protocol stack, the various industrial application devices and the monitoring and management software. Purpose:To demonstrate the availability of IEEE e/EGTS draft for practical networks. Notice:This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 2 Outline Objective Demonstration System Conclusion
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 3 Objective Demonstrate the availability of IEEE e/EGTS draft; Implement IEEE e/EGTS stack into practical industrial system; Evaluate the performance of IEEE e/EGTS network;
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 4 Main Evaluation and Demo Works Implement an IEEE e/EGTS stack Set up a demonstration network with more than ten devices, which is embedded the 15.4e/EGTS FW. Design a monitoring and management software to control this network on the coordinator
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 5 The MAC Stack with EGTS Functions
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 6 Topology of the demonstration system
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 7 Platform of the demonstration system Coordinator Wireless CO sensor Wireless SO2 sensor Wireless pressure transmitter Wireless humidity sensor Wireless temperature sensor Wireless powder sensor Wireless pressure transmitter from Silian Company Wireless pressure transmitter from Yokogawa … etc
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 8 Deterministic schedule and Monitoring Software Schedule map for resources allocation A device requiring periodical transmissions can apply for EGTS slots In this system, through appropriate arrangement of the EGTS slots, deterministic communication for some critical sensors can be provided. The schedule map based on EGTS proposal was formed and shown in the monitoring software.
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 9 Frames of e/EGTS Captured by sniffer
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 10 Conclusion IEEE e/EGTS solution works well for industrial application as: –Channel Hopping and multi-superframe in ECFP, improve the capacity of dedicated bandwidth –The dedicated transmission slot is very useful for industrial applications, because industrial applications usually need deterministic schedule
The CQUPT Demonstration System of IEEE e/EGTS Draft November WangPing, Wang Quan Slide 11 Thank you!