SWEN R2 User’s Manual SWEN R2 User’s Manual

Introduction Configuration Component Charging Power on/off Warming up Icons on the upper screen Buzzer on/off Lamp on/off Setup of LCD bright Clock set Calibration Scanner operation Attentions Specifications & Features INDEX

Without the necessity of bottle opening or content sampling, the SWEN R2 just scans PET bottles and easily identifies the contents inside them. Our detector employs a microwave using GPR (Ground Penetrating Radar) to identify contents, which prevents users from being exposed to X-rays or other radiations and chemical substances to be carefully used. This detector employs microwave to penetrate most objects; thus even a very small quantity of flammable substance can be detected. Its superior CPU with the high speed performs the fast scanning within just one second. Such simple operation of the SWEN R2 does not require additional personnel, thus labor costs could be kept at a minimum. Overview

[2] Case [3] Belt [4] Adapter [4] Key ring [1] SWEN R2 Scanner Configuration

DETECTING BUTTON Components

[*] The icon of charging appears when the charging adapter is connected and the message that it started charging appears and then disappears. Charging

1. The operation is initialized once power is on. [*] The icon of charging appears when the charging adapter is connected and the message that it started charging appears and then disappears. 2. Success of system initialization 3. Failure of system initialization. In this case, re-trial of power- on or calibration is required. Power on/off

Warming up After 10 seconds Press on the button Warming up Power Save Wake Up

State of battery charging (4 phases) Buzzer - off Buzzer – on (warning messages & detecting beeping) LED lamp-off Current state of battery charging LED lamp-on (during the detecting process) Icons on the upper screen

Buzzer on/off Buzzer - on Buzzer - off 1. Press the menu key. 2. Move to the Buzzer through up/down cursor 3. Press the menu key. 4. Buzzer on with beeping sound 4. Buzzer off

1. Press the menu key. 2. Move to the Lamp through up/down cursor 3. Press the menu key. 4. Lamp off 4. Lamp on with flickering Lamp on/off Lamp - on Lamp - off

1. Press the menu key. 2. Move to the LCD Bright through up/down cursor 3. Press the menu key. 4. Adjust the bright level(1~5) through up/down cursor 5. Press the menu key for setup Setup of LCD bright

1. Press the menu key. 2. Move to the Clockset through up/down cursor 3. Press the menu key. 4. Setup of time through up/down cursor 5. Move to the other part Through up/down cursor 6. Complete the clock set through the menu key 7. Return to menu screen after clock set Clock set

1. Press the menu key. 2. Move to the Calibration through up/down cursor 4. Calibration is operating 3. Press the menu key. 5. Failure in calibration7. Return to the menu screen 6. Success in calibration 7. Return to the menu screen Start of calibration Calibration

Scanner operation Nonflammables Inflammables Put the subject like the image and press the sensor in the red circle.

Liquid amount 1.The subject should be placed on the center of the sensor. 2.The proper amount of liquid is needed. 3.The subject cannot be scanned through being placed on floor (desk, or glass etc.). Scanner operation

This scanner is specified for DC9V. The unintended disassembly is not allowed. The unreasonable uses such as watering or forceful pressing can cause damages on the scanner. During the processes of Initialization and Calibration, there should be no subject affecting the sensor. In case of defecting the result of the sensor due to peripheral environment, the calibration or power-on should be conducted again. The conductive currents, glass or metal materials which are around the sensor can cause malfunctioning of the scanner. The user should be careful against the high voltage inside the scanner. Once the message of Low Battery appears, the battery should be charged promptly. Despite such usage, the continuous usage of the battery can be one factor of reduction in battery life. Attentions

Type Principle of Detection Detection Method Microwave Output SWEN-R2 Type Substance identification by microwave Evaluation of the property of substance Less than 5mw (Detection within 5~8cm) Detection IntervalReal time - within one seconds Result NotificationDisplayed on LCD panel and a buzzer goes off Main ProcessorS3C840FX Detection ProcessAutomatic identification when placed on the surface of a subject Power Source 7.4V 2400mA Li-ion battery Power ConsumptionOperating Mode : Less then 500mA, Sleep mode : Less then 25mA Battery charge time8 hours Adapter9V 1000mA Operational Condition -10~40 ℃, 95%RH Size and Weight The main unit W66×D400×H33mm / Weight : 540g Specifications & Features

Thank you