10th ITPA conference, Avila, 7-10 Jan Effects of High Energy Ions Accelerated in front of ICRF Antennas in LHD S. Masuzaki on behalf of the LHD Experimental Group National Insititute for Fusion Science
10th ITPA conference, Avila, 7-10 Jan Fast Wave Antennas (Loop Antenna) –Installed from top and bottom ports –Single strap loop twisted to fit the LHD plasma shape –Sizes of launcher length 60cm total width 46cm center strap width 30cm –Most parts are water cooled for steady state operation –Radial antenna position is movable by 16cm
10th ITPA, Avila, 7-10 Jan Fast Wave Antenna (Loop Antenna) 3.5 U&L 4.5 U&L 7.5 U&L
10th ITPA conference, Avila, 7-10 Jan Achieved Pulse Length and Injected Power
10th ITPA conference, Avila, 7-10 Jan Experimental Condition for Minority Heating
10th ITPA conference, Avila, 7-10 Jan Localized heat load on divertor plates are observed during long pulse discharges, and it causes gradual density increase and termination of discharge. Hot spot is formed on a bottom divertor plate Density and radiation power increased with hot spot formation, and discharge was terminated at last.
10th ITPA conference, Avila, 7-10 Jan Particle orbit calculation shows that accelerated ions in front of the antennas can slip out from divertor trace
10th ITPA conference, Avila, 7-10 Jan The calculation well reproduces the observed image.
10th ITPA conference, Avila, 7-10 Jan Heat load and recycling increase is localized near ICRF antenna. Toroidal distributions of temperature rise of divertor plates and Ha increase
10th ITPA conference, Avila, 7-10 Jan Other Heating Mode for Steady State Operation
10th ITPA conference, Avila, 7-10 Jan Summary In LHD, ion cyclotron resonance for minority ion (proton) heating mode cross the ICRF antenna, and protons outside LCFS are accelerated just in front of antenna. The accelerated protons hit divertor plates locally, and rise the plates temperature. It causes density rise due to out-gassing, and terminates discharge. Particle orbit calculation well reproduce the localized heat load distribution. To mitigate the direct ion loss, other heating mode has been examined.
10th ITPA conference, Avila, 7-10 Jan Additional viewgraphs
10th ITPA conference, Avila, 7-10 Jan Hot spot on side protectors could be caused by RF sheath
10th ITPA conference, Avila, 7-10 Jan Damaged divertor plates distribution agree with the distribution of high energy proton deposition Distribution of high energy proton deposition Distribution of damaged divertor plates