AP-5131 Ordering Guide Rev. 3 – 07/05/06 Notes: - The AP-5131 is available in Single and Dual radio configurations: the Single radio version can operate as either an a or an b/g Access Point; the Dual radio version can operate in both bands simultaneously. - Kits do not include AC power cables. Please order separately the AC power cords listed in the power accessories section. - For most installations, the AP-5131 can be deployed using the compact omni- directional antennas provided in the Kits. For custom RF coverage, a portfolio of antennas and accessories is available. Please refer to the last section of this guide for information on what accessories are required for each antenna.
AP-5131 Kits Rev. 1 – 06/29/06
Single Radio Kits Part NumberKit DescriptionRoHS AP WW Single-Radio a/b/g Access Point AP WWR Single-Radio a/b/g Access Point with 802.3af Power Supply/Injector AP WW Single-Radio a/b/g Access Point with two Dual-Band Dipole Antennas AP WWR Single-Radio a/b/g Access Point with 802.3af Power Supply/Injector and two Dual-Band Dipole Antennas AP IL Single-Radio a/b/g Access Point with 802.3af Power Supply/Injector and two Dual-Band Dipole Antennas For sale in Israel only
Dual Radio Kits Part NumberKit DescriptionRoHS AP WW Dual-Radio a+b/g Access Point AP WWR Dual-Radio a+b/g Access Point with 802.3af Power Supply/Injector AP WW Dual-Radio a+b/g Access Point with four Dual-Band Dipole Antennas AP WWR Dual-Radio a+b/g Access Point with 802.3af Power Supply/Injector and four Dual-Band Dipole Antennas
Power Accessories
Part NumberDescriptionRoHS RPower Supply, VAC, 48 VDC, 0.25A. Requires Power Cord. AP-PSBIAS-1P2-AFR802.3af Power Supply/Injector; VAC. Requires Power Cord RAC Power Cord for United States RAC Power Cord for Europe RAC Power Cord for United Kingdom RAC Power Cord for Japan RAC Power Cord for Australia
2.4 GHz Antennas b/g
2.4 GHz Antennas Part NumberDescriptionRoHS ML PNA2-01R Environment: Indoor / Outdoor Type: Panel Gain (Net): 11.2 dBi (8.5 dBi) Beam Width: E-Plane: 14º, H-Plane: 97º Cable: 96 in. Connector: RP-BNC Male Requires adaptor ML PNL-72-N Environment: Indoor / Outdoor Type: Panel Gain (Net): 7.5 dBi (5.5 dBi) Beam Width: E-Plane: 56º, H-Plane: 135º Cable: 72 in. Connector: Type N Male Requires R adaptor ML-2499-SD3-01R Environment: Indoor Type: Patch Gain (Net): 4.8 dBi (3.5 dBi) Beam Width: E-Plane: 52º, H-Plane: 360º Cable: 48 in. Connector: RP-BNC Male Requires adaptor ML-2499-HPA3-01R Environment: Indoor / Outdoor Type: Dipole Gain (Net): 4.6 dBi (3.3 dBi) Beam Width: E-Plane: 31º, H-Plane: 360º Cable: 48 in. Connector: RP-BNC Male Requires adaptor ML-2499-BYGA2-01R Environment: Indoor / Outdoor Type: Yagi Gain (Net): 14.2 dBi (13.9 dBi) Beam Width: E-Plane: 27º, H-Plane: 28º Cable: 12 in. Connector: Type N Female Requires R adaptor
5 GHz Antennas a
5 GHz Antennas Part NumberDescriptionRoHS ML-5299-PTA1-01R Environment: Indoor Type: Patch Gain (Net): 6.5 dBi (4.5 dBi) Beam Width: E-Plane: 45º, H-Plane: 360º Cable: 36 in. Connector: RP-SMA Male ML-5299-WPNA1-01R Environment: Indoor / Outdoor Type: Panel Gain (Net): 14.2 dBi (13 dBi) Beam Width: E-Plane: 27º, H-Plane: 31º Cable: 36 in. Connector: RP-SMA Male ML-5299-HPA1-01R Environment: Indoor / Outdoor Type: Dipole Gain (Net): 5.9 dBi (5 dBi) Beam Width: E-Plane: 17º, H-Plane: 360º Cable: 36 in. Connector: RP-SMA Male
Dual-Band Antennas a/b/g
Dual-Band Antennas Part NumberDescriptionRoHS ML-2452-APA2-01 Environment: Indoor Type: Dipole Gain: GHz, 4 5 GHz Beam Width: E-Plane: 35º, H-Plane: 360º Connector: RP-SMA Male
Antenna Accessories
Part NumberDescriptionRoHS RP-SMA (Female) to RP-BNC (Female) Adaptor. Required to use RP-BNC antennas with AP R RP-SMA (Female) to Type N (Male) Adaptor. Required to use Type N Female antennas with AP R RP-SMA (Female) to Type N (Female) Adaptor. Required to use Type N Male antennas with AP ML JK-01R 10 ft. Low-loss coaxial cable jumper: N male to N male. ML JK-01R 25’ Low-loss coaxial cable jumper: N male to N male w/2 connector seal kits. ML JK-01R 50’ Low-loss coaxial cable jumper: N male to N male w/2 connector seal kits. ML JK-01R 100’ Low-loss coaxial cable jumper: N male to N male w/2 connector seal kits. ML PJ-01R 6 ft. RBN female to RBN male Plenum coaxial jumper. ML-1499-RBNCA1-01R 1 ft. N female to RBN female cable adapter w/connector seal kit. ML-1499-RBNCA2-01R 1 ft. N male to RBN female cable adapter w/connector seal kit. ML-1499-LAK1-01R 1 ft. N male to RBN male Lightning Arrestor w/connector seal kit. ML-1499-LAK2-01R Lightning arrestor Kit with N male to N male Barrel adapter. ML-2452-LAK1-01R Lightning arrestor (N female to N female) with N male to RSMA male adapter. ML-1499-APAMK-01R Magnetic Base for ML-2452-APA2-01 with 6 ft. cable, RP-SMA (Female). ML-1499-SD3MK-01R Articulating I-Beam Mount Kit for ML-2499-SD3-01 Omni Antenna.
How to connect 2.4 GHz Antennas to the AP-5131
ML PJ-01R – 6 ft. (optional) ML PNA2-01R ML-2499-SD3-01R ML-2499-HPA3-01R RP-BNC Male Antennas ML-1499-RBNCA2-01R With Lightning Arrestor Without Lightning Arrestor ML-2452-LAK1-01R
R ML-2499-BYGA2-01R Type N Female Antennas ML-2452-LAK1-01R With Lightning Arrestor Without Lightning Arrestor Without Lightning Arrestor R ML JK-01R – 10 ft. ML JK-01R – 25 ft. ML JK-01R – 50 ft. ML JK-01R – 100 ft.
R ML PNL-72-N Type N Male Antennas With Lightning Arrestor Without Lightning Arrestor ML JK-01R – 10 ft. ML JK-01R – 25 ft. ML JK-01R – 50 ft. ML JK-01R – 100 ft. ML-2452-LAK1-01R R