General Theatre Safety Rosa, Alexus, Alexis, Lauryn, Gloria, Frida, Aubrey.

Slides:



Advertisements
Similar presentations
Discuss 1) In what ways can we be safe in a lab?
Advertisements

Machine Shop Hazards, Machine Tool Safety
Stage Make up!. How to apply stage make up! -First use a mirror with as much light as possible, --Make sure you have all of the sponges and brushes needed,
CHEMISTRY 21A Survey of General and Organic Chemistry
Theatre Safety, it’s not just for techies!
Tech Theatre Safety Notes “Safety First”. Painting Maintain a clean/organized enviroment Keep sink clear of any paint, rags, and brushes CLEAN BRUSHES.
TECHNICAL THEATRE SAFETY. GENERAL THEATRE SAFETY  Theatres usually have a FIRE CURTAIN that can close off the performing area from the auditorium  Multi.
Safety in the workshop!! ( All Technology Classes ) Because safety is #1.
Safety in the Theater.
Safety is Your Responsibility
Safety and Rules of the Lab
IN Headings Vocabulary Important Info. Know safety symbols They appear in your laboratory activities They will alert you to possible dangers They will.
Safety and Rules of the Lab
Laboratory Safety.
Lab Safety The Does and Don'ts.
SAFETY FIRST!. FOLLOW ALL INSTRUCTIONS Instructions may be verbal. Instructions may be written.
General SHOP SAFETY In technology education, SAFETY is regarded as essential for at least two reasons. #1 – The natural concern for people’s welfare.
Safety in the Laboratory. General Guidelines Conduct yourself in a responsible manner!! Follow all written and verbal instructions. Never work alone.
Safety and Rules of the Lab
Safety and Rules of the Lab
Laboratory Safety.
LAB SAFETY Safety is Your Responsibility No Horse-play in the Lab……
Module 1 : Lesson 1: Working safety in the shop
Graphic Arts Safety Rules
Good Morning 10/16/2015 Starter: What should you never do with dangerous chemicals around? Pass around the gradesheets. Goal for today: learn about safety.
SAFETY IN THE SCIENCE LABORATORY Read instructions before starting experiments; Follow all directions carefully.
Why even worry about all this lab safety stuff? Sodium Hydroxide to the skin Ammonia in the eye.
Science Safety Rules! You must score 90 or above before you may participate in the laboratory science activities. If labs occur before your completion.
Mr. M. Couturier ALL SCIENCE CLASSES
Safety and Rules of the Lab. Safety Symbols Know safety symbols They appear in your laboratory activities They will alert you to possible dangers They.
2. Follow all written and verbal instructions carefully
Scene Shop and Electricity Safety
THEATRE SAFETY Pg
Safety and Rules of the Lab. Lab Safety Rules Part of this PowerPoint has been taken from the power point of…. Tim Baker, Adam Kueltzo, and Todd Katz….former.
Section 0.1 Safety and Rules of the Lab
1. Before the Lab 2. During the Lab 3. If there’s a problem… 4
Lab Safety Learning Goals: I will be able to describe how to behave in a science lab in order to maximize my own safety as well as the safety of others.
Jeopardy Chemical Safety Fire Safety Dress Code Sharp Object Safety Electrical Safety Q $100 Q $200 Q $300 Q $400 Q $500 Q $100 Q $200 Q $300 Q $400 Q.
Know safety symbols They will alert you to possible dangers They will remind you to work carefully.
Safety is Your Responsibility
Theatre Safety A quick guide to avoiding accidents in class.
General Safety Foundations of Engineering and Technology I.
Lab Safety Rules. Safety Symbols Know safety symbols They appear in your laboratory activities They will alert you to possible dangers They will remind.
Safety and Rules of the Lab
SAFETY FIRST! Please have out a pen or pencil!. FOLLOW ALL INSTRUCTIONS Instructions may be verbal. Instructions may be written.
Safety Rules. Conduct yourself in a responsible manner at all times in the laboratory. No horseplay, pranks or practical jokes. Keep your hands to yourself.
Ms. Vallejo’s Technical Theater Safety Rules and Regulations
General Safety Foundations of Engineering and Technology.
Theatre Safety Rules.
Safety In the Science Lab Rules and Symbols Lab Safety: Everyone Is Responsible! Mrs. O’Connor Hazelwood Central High School
Woodworking General Safety. General Safety Information Information used to help prevent accidents in the shop.
Lab Safety General Guidelines. Conduct yourself responsibly –Follow written and verbal instructions –Never work alone –Don’t touch any equipment, chemicals.
Laboratory Procedures for Biology I
Safety Rules Physical Science.
Health and Safety The Legal Side Health and safety of the workforce
JHS Technical Theatre Shop Safety
Lab Safety The answers to why you need to be CAREFUL and HOW to stay out of trouble.
Safety and Rules of the Lab
Safety is Your Responsibility
Science Safety.
Safety and Rules of the Lab
SAFETY FIRST.
Safety in the Physics Laboratory
Science Lab Safety
Foundations of Engineering and Technology I
Safety Rules!.
Scene Shop and Electricity Safety
SAFETY IN THE CLASSROOM LAB. SAFETY IN THE CLASSROOM LAB.
Safety In the Science Lab
Presentation transcript:

General Theatre Safety Rosa, Alexus, Alexis, Lauryn, Gloria, Frida, Aubrey

Regulations Running around, playing jokes, throwing stuff around or to each other is not allowed. Running around, playing jokes, throwing stuff around or to each other is not allowed. All the work areas must be kept clean and kept in safe condition and all tools must be put up. Walkways and exits must be clear and open. All the work areas must be kept clean and kept in safe condition and all tools must be put up. Walkways and exits must be clear and open. If anything should happen, immediately report it to the teacher to handle the situation. If anything should happen, immediately report it to the teacher to handle the situation.

Clothing When working in the scene shop, wear closed and hard soled shoes. No sandals or bare feet allowed. When working in the scene shop, wear closed and hard soled shoes. No sandals or bare feet allowed. No type of loose clothes or jewelry should be worn when using power tools. Long hair should be tied back or covered. No type of loose clothes or jewelry should be worn when using power tools. Long hair should be tied back or covered. Goggles must be worn when using power tools or equipment. Goggles must be worn when using power tools or equipment. Wash hands when done working. Wash hands when done working.

Fire Protection Access to exits must be kept clear at all times. During periods of occupancy, no exit door should be locked or obstructed at all. Access to exits must be kept clear at all times. During periods of occupancy, no exit door should be locked or obstructed at all. Flammable materials such as oil-based paints, thinners, and spray cans should be stored in the special non- flammable storage cabinets. Flammable materials such as oil-based paints, thinners, and spray cans should be stored in the special non- flammable storage cabinets. Light bulbs must not be covered or decorated with paper or other material. Light bulbs must not be covered or decorated with paper or other material.

Tools Keep your work area clean Keep your work area clean Before using machinery or power tools for the first time, check out operation procedures Before using machinery or power tools for the first time, check out operation procedures Don’t use any defective tools, tell teacher if something goes wrong. Don’t use any defective tools, tell teacher if something goes wrong. Make sure the switch is "off" before plugging in the cord. Never carry a power tool with your finger on the switch. Make sure the switch is "off" before plugging in the cord. Never carry a power tool with your finger on the switch. Do not force tools Do not force tools

Tools Cont. Maintain proper footing, balance, and a secure grip on the tool you are using. Maintain proper footing, balance, and a secure grip on the tool you are using. Never adjust or change bits, blades, or belts with the power tool or machine connected to its power source. Never adjust or change bits, blades, or belts with the power tool or machine connected to its power source. Never brush away chips or sawdust while tools or machines are operating. Never brush away chips or sawdust while tools or machines are operating. Never leave tools running unattended. Disconnect from the power source when not in use. Never leave tools running unattended. Disconnect from the power source when not in use.

Rigging Only authorized personnel are allowed to work with the rigging equipment. Only authorized personnel are allowed to work with the rigging equipment. Work gloves must be worn when handling the purchase lines on a counterweight system. Work gloves must be worn when handling the purchase lines on a counterweight system. The technical director should be the only person to call instructions to the grid crew. The technical director should be the only person to call instructions to the grid crew. The correct call to warn of a batten, scenery, or line coming in under control is "Heads up!" The emergency call for falling objects is to yell, "Clear the stage!" The correct call to warn of a batten, scenery, or line coming in under control is "Heads up!" The emergency call for falling objects is to yell, "Clear the stage!"

Rigging Cont. Pockets should be emptied before going on to the grid. Pockets should be emptied before going on to the grid. Tools or hardware must never be left loose on the grid. Tools or hardware must never be left loose on the grid. Any discovered defects in cable should be reported to the teacher. Any discovered defects in cable should be reported to the teacher. Before loading or unloading an arbor, the grid worker must call out, "Clear the rail!" When this area is clear, someone on stage must call out, "Rail clear!" Before loading or unloading an arbor, the grid worker must call out, "Clear the rail!" When this area is clear, someone on stage must call out, "Rail clear!" When loading or unloading is complete, the grid worker should call out, "Rail is safe!" This call should be acknowledged from the stage. When loading or unloading is complete, the grid worker should call out, "Rail is safe!" This call should be acknowledged from the stage. Except for the actual moment of flying, every counterweight set should be kept locked off with the locking rings in place. Except for the actual moment of flying, every counterweight set should be kept locked off with the locking rings in place.

Lighting Only authorized personnel are allowed to work with the lighting. Only authorized personnel are allowed to work with the lighting. Any electrical defect must be reported to the teacher for correction. Any electrical defect must be reported to the teacher for correction. Even when disconnected, some electrical equipment can cause shocks. Never remove the cover of a device without assessing the potential danger. Even when disconnected, some electrical equipment can cause shocks. Never remove the cover of a device without assessing the potential danger. Food or beverages are not allowed in the light control area. Food or beverages are not allowed in the light control area.

Make-up Never lend or accept make-up from anyone. Never lend or accept make-up from anyone. Wash hands before and after applying make-up to each person. Wash hands before and after applying make-up to each person. Sponges and brushes should be washed after use on each person. Sponges and brushes should be washed after use on each person. Avoid aerosol products whenever possible. Avoid aerosol products whenever possible. Replace old makeup regularly. Replace old makeup regularly. Avoid creating clouds of face powder that can be inhaled. Do not use old face powder. Avoid creating clouds of face powder that can be inhaled. Do not use old face powder. Moisten brushes or pencils with clean tap water, not with saliva. Moisten brushes or pencils with clean tap water, not with saliva. When removing spirit gum or latex, avoid prolonged skin contact with solvents. When removing spirit gum or latex, avoid prolonged skin contact with solvents.