SL500 Modular Library System

Objectives Locate needed information. Define the safety and ESD requirements. Identify and locate major components. Unpack, install & configure the library. De-install the Library. Configure switches, bridges and hubs. Label and route cables drives to other equipment. Verify and /or install library firmware.

Objectives Setup and operating performance. Diagram and document the installation. Update the site logs to reflect the customer’s subsystem configuration.

Prerequisites SL500 Principles of Operation SAN Concepts and Connectivity. L-Series Library course. LTO Ultrium course. SDLT course.

Personal Safety Safety Precautions Lifting Techniques Shoulder, Elbow, Wrist, and Hand Safety Fiber -optic Safety Rack Safety

Product Precautions Electrostatic Discharge (ESD) Damage Prevention  ESD Precautions  ESD Protection Procedure  Prepare the work Area  Access the Equipment  Replace components  Cleanup Fiber – optic Cable Installation  Cable routing  Cable Management  Connector protection

Planning the Installation General Information  Prepare the Installation location  Knowledge in SCSI principles  Knowledge in Fibre channel principles  Configuration Diagram

SL500 Tape Library Types Library with LTO Cartridge Slots Library with Mixed-Media Cartridge Slots

Library with LTO Cartridge Slots The Base module contains  50 cartridge slots  One or two tape drives  5 – slot cartridge access port(CAP)

Library with LTO Cartridge Slots base module

LTO Slot Physical Configurations Slot Numbering scheme  Four Integers 1.Library number 2.Library module number 3.Library row number 4.Library column number

Library with Mixed - Media Cartridge Slots

Library and Rack Dimensions

Library Components Weights

Library Environment Specifications

Power for Library Without Tape Drives

Power for Base Unit and Two LTO Tape Drives

Installing EZ Hardware Compatibility Issues

Installation Steps  Unpacking  Inspection  Preparation of Rack  Install Base Unit  Install Robotics Unit  Install Façade  Install an Expansion Module  Install the Drive Tray Assemblies  Install the Power Cables  Install the Library SCSI or Fiber Channel Cables  Inserting Cartridges  Locking the Front Door and Powering-on the Library

Base Module Accessory Kit

Expansion Module Accessory Kit

SCSI Cabling

Fiber Channel Cabling

Inserting Cartridges

Powering - on the Library

Recording the Configuration Library Configuration Information

Recording the Configuration Tape Drive Configuration Information

Security & Password

FRU and Spares Replacement  Library FRU list  Drive FRU list

Library FRU List  Cards  MPU2  MPW  RLB  RLC  RLE  RLM  Fans  Operator Panel  Power Supply  Robotics unit  Drive FRU list

Drive FRU List RLD Card Fan Tape Drive Brick

Remote Access Tools Stream Line Library Console Service Delivery Platform(SDP) Motive Insight ACSLS