Strength grade of cement W/C Strength formula of the concrete Factors of aggregate Curing condition Testing condition §4.4.6 Influencing factors.

Slides:

Advertisements

Similar presentations

Civil Engineering Materials

Advertisements

EARLY AGE COMPRESSIVE AND TENSILE STRENGTH DEVELOPMENT OBJECTIVE Determine how SCC strategies…  high paste content  VMA (thickeners)  smaller aggregate.

Sample Problem 4.2 SOLUTION:

Concrete Condensed1 Cement Production, Composition & Types.

B Persson, LTH Building Materials, University of Lund, Lund, Sweden ON THE TEMPERATURE EFFECT ON SELF-DESICCATION OF CONCRETE Experimental setup: l 250.

Inspection, Quality, Variation, Statistical Control and Acceptance Criteria Dr. J.SUDHAKUMAR Assistant Professor Department of Civil Engg. NIT, CALICUT.

Mechanical Properties of HPC with Expansive Additive and Shrinkage Reducing Admixture under Simulated Completely- Restrained Condition at Early Age Takafumi.

Sample Problem 4.2 SOLUTION:

Strength of Concrete.

NIOSH Pittsburgh Research Laboratory

Topic : MIX DESIGN OF CONCRETE Properties of concrete Submitted To: DR. AYUB ELAHI Submitted By: SOHAIB NASEER 2K9-scet-29/CIVIL M.ZAEEM FAKHAR 2K9-scet-03/CIVIL.

Concrete Technology Properties of Hardened Concrete Lecture 17 Eng: Eyad Haddad.

Faculty of Engineering Division of Built Environment Laboratory of Engineering for Maintenance System Hokkaido University Clarification of Frost Damage.

Mechanical Behavior of Recycled PET Fiber Reinforced Concrete Matrix (Paper Code: 15FR ) Dr. C. Marthong and Dr. D. K. Sarma National Institute.

Chapter 5 Construction Mortar.

4.7.2 High-strength Concrete (HSC) Introduction –Definition –Classifications Choice of HSC raw material –Binding material –Excellent aggregate –Superplasticizer.

4.7.5 Non-dispersion Concrete in Water (NDC) Introduction Composites of NDC Properties of NDC.

Aggregates for Concrete

§4.4.6 Influencing factors Strength grade of cement W/C

Technical requirementsTechnical requirements –Resistance to corrosion –Frost-resistance –Thickness protective layer of marine reinforced concrete –The.

There are three important definitions about strength  Cubic compressive strength of concrete  Assurance factor of concrete  Standard cubic compressive.

Jacob Nicholas Okello 2012bc24921 Education Technology assignment Class 2012bcbc 1b.

Chapter 9. Bituminous material  Road oil bitumen  Mineral material Chapter 9 §9.4 Component Material of Bituminous Mixture.

 Classification  Features in Influencing Concrete  Fine Aggregate-Sand  Coarse Aggregate-Gravel Aggregate.

 Classification  Features in Influencing Concrete  Fine Aggregate-Sand  Coarse Aggregate-Gravel Aggregate.

Strength grade of cement W/C Strength formula of the concrete Factors of aggregate Curing condition Testing condition §4.4.6 Influencing factors.

10-8 Areas and Volumes of Similar Solids

Chapter 3 Cement Technical Properties of Portland Cement Fineness Setting Time Soundness of the Portland Cement Strength Other properties.

Influence from ingredients Influence from ingredients W/C W/C Quantity of paste Quantity of paste Sp Sp Aggregates Aggregates Admixture Admixture Influence.

Mix design of high strength concrete, special cases in mix design Exercise 7.

–Mineral Admixture –Ordinary Portland Cement (P.O) –Portland granulated Blast-furnance-slag Cement (P.S) –Portland-Pozzlana Cement (P.P) –Portland fly-ash.

Coarse Aggregate Selection for Improved Rigid Pavement Joint and Cracking Performance Jeffery R. Roesler, Ph.D., P.E. and Punya Chupanit, Ph.D. University.

Chapter 5 Construction Mortar.

 Deformation in load and damage process:  Damage type under compressive load  Original crack  Damage process-one-axis static compression §4.4.2 Deformation.

Chapter 4 Ordinary Concrete. §4.2 Ingredient of Ordinary Concrete Cement4.2.1 Cement Aggregate Water Concrete Admixture.

Composition of cement paste, concrete admixtures and mix design of superplasticized concrete Exercise 4.

Forging new generations of engineers

Prism compressive strength f cp The compressive strength of 150×150×300mm prism, cured in standard condition, 28 days. The relation of prism compressive.

10-8 Areas and Volumes of Similar Solids Theorem Theorem Similar Solids Similar Solids Similarity Ratio Similarity Ratio.

Necessary Information Required compressive strength at 28days: 30 Mpa Type of structure: mass concrete, beam, column. Maximum size of aggregate: 20 mm.

Drying Shrinkage Presentation By Savita Goel May 17, 2002.

Concrete Inspection Construction Inspection for Field Office Activities.

CVL 2407 Faculty of Applied Engineering and Urban Planning Civil Engineering Department 2 nd Semester 2013/2014 Dr. Eng. Mustafa Maher Al-tayeb.

Aggregates Aggregates are inert materials mixed with a binding material like cement or lime in the preparation of mortar or concrete. Granular material.

Unit 1 Objectives. The student will be able to: 1.Recognize, understand, and estimate the size of common metric units. 2.Convert from one metric prefix.

Experimental Centre, Faculty of Civil Engineering, CTU in Prague, Ondřej HOLČAPEK, Pavel REITERMAN, Marcel JOGL and Petr KONVALINKA.

 Experimental Part.  Data Collection and Analysis.  Conclusions and Recommendations.

Chapter 8 Design of Concrete Mixes Total 611. The basic procedure for mix design is applicable to concrete for most purposes including pavements. Concrete.

Simplex Method for BLENDING OF AGGREGATES The contract specifications of a building project require that the course aggregate grading for concrete mixing.

Evaluation of Composites Hardness Measurement

University of Illinois at Urbana-Champaign

Sample Problem 4.2 SOLUTION:

A Surface Area of Similar Solids

MODULE 4 BUILDING MATERIALS.

A STUDY ON HIGH PERFORMANCE CONCRETE WITH FLY ASH AND SILICA POWDER

SHERINE RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

بسم الله الرحمن الرحيم.

ALGEBRA I : SECTION 9-1 (Quadratic Graphs and Their Properties)

Bone Cells or Osteocytes.

Sample Problem 4.2 SOLUTION:

Fabric form concrete and paraweb system

Volume Pyramids.

Forging Forging is a deformation process in which the work is compressed between two dies, using either impact or gradual pressure to form the part. It.

Recycled Concrete Aggregates

Презентация құру кезінде анимациялық эффектілерді қосу

Influence of properties of coarse aggregate

Unit 5 Review 6th Grade Math.

Maximum Size of Aggregate

Bending Deformation of a Straight Member

Presentation transcript:

Strength grade of cement W/C Strength formula of the concrete Factors of aggregate Curing condition Testing condition §4.4.6 Influencing factors

Testing conditions Influencefactors of concrete strength strength Operation Experimental instrument instrument Surfacetexture Shapes Dimensions

Two kinds of effects hoop effect size effect Testing conditions

hoop effect  When the concrete specimen is suffered by the axis compression.  The traverse deformation of compression panel is smaller than that of the concrete.  Thus the contacting surface between specimen and compression panel is influenced by the centric constraint.  It is effective in the range of √3a/2  Improve the concrete strength  After the damage of the specimen a complete pyramid is formed upper and below.

flash

Aggregate Dmax （ mm ） Size of specimen （ mm ） hoop effect strength Conversion coefficient ≤60≤40≤ feebleness low feebleness low strong high Size of specimen ≮ 3Dmax size effect Tab Effects of size to concrete strength Effects of size to concrete strength are listed in Tab.4.4.3