Nikon D200 Training Part 2 Flying the Mission Civil Air Patrol TX-413 Nighthawk Squadron.

Slides:



Advertisements
Similar presentations
Ex. 22 – Forced Landing Ex Forced Landing.
Advertisements

Pre-Solo Training Program
Responsible Driving Mastery Learning
Conduct a Sortie Aircrew Roles & Techniques Conducting an Imaging Sortie 1 Prepare Conduct Transfer Bag & Tag Publish.
1 Air Navigation & Mission Planning CAP SWR-TX-176 Prepared by: Maj Steve Barati Graphics by: Maj Ray Hischke 11/17/09 Click to advance.
Authored by Rich Simerson 26-Sep-94 Revised 01-Apr-2010 Modified by Lt Colonel Fred Blundell TX-129 Fort Worth Senior Squadron For Local Training Rev 5.0.
AZ Wing CAP Mission Aircrew Airborne Photographer Revision Jan 2015
Getting Started Media Concepts The Spill Home Page The Spill Resource Page.
Measuring Prototype Structures for Models Kevin Looff Rick Watson March 1, 2008.
Normal Procedures Cirrus SR-22 Transition Training 8/16/04.
Helicopter Safety for SAR Operations. Helicopter Rescue Checklist, Before you Call Before you consider using a helicopter for a rescue: Have we cross-trained.
Guidelines for Shooting Effective Video. Keep it Steady Use a tripod Brace yourself against something steady Use the human tripod technique (camera shake.
P-2028 Minnesota Wing Aircrew Training: Tasks P-2028 Crew Resource Management.
Pre-Solo Training Program
Photography (the very basics). Before we get started… - These are only very simple explanations - I could be wrong! - Mainly aimed at digital users.
Eights-on Pylons Not to be confused with Eights around pylons Eights across a road Eights along a road.
Chandelles.
Soft Field Takeoff and Landing. Soft Field Takeoff w Before landing, will you be able to take off? w Complex and high performance aircraft often have.
AIRCRAFT HANDLING Part 4 Flight Preparation.
Computer Simulation with Flight Simulator X Introduction to Flight Simulator – Level 1.
Video Communication & Production
Just fly until 500’ AGL (700’ MSL) Then turn crosswind
Module Two. Purpose Simulation type activity of how to conduct a Student Session Provide information on the events of the day Agenda Student Mission Possible.
Microlight flights lessons Exercise Circuits.
Basic Camera & Tripod Safety & Setup. Things to Consider: Camera’s are costly to repair (almost half of purchase price) Camera’s are costly to repair.
BASIC PHOTOGRAPHY SKILLS. EXPERIMENT Shoot from different perspectives – up high, down low etc. getting in close – stepping back for a wider angle shot.
Miscellaneous Notes: This is a bare-bones template – make it fancier if you wish, but be sure to address at least the items listed here. Basically this.
Incident Reporting Procedure
AIRCRAFT HANDLING Part 5 Pre-Take Off Checks. Starting Engines Starting engines is a team procedure between the pilot and the ground handling team. The.
Mission Pilot Skill Set
LA Series Fixed Aircraft Homer Module 10 of CASARA ELT Training Plan.
AVAT11001: Course Outline Aircraft and Terminology
Aerial Photographic Reconnaissance (APR), Digital Photography, and Web Mission Information Reporting System (WMIRS) Lt Col Dietrich P. Whisennand HQ 4th.
A FLIGHT INSTRUCTORS GUIDE FOR SOLOING A STUDENT PILOT.
Web Mission Information Reporting System Quick Start Training Texas Wing Civil Air Patrol Operations Directorate.
1. Objectives  Describe the responsibilities and procedures for reporting and investigating ◦ incidents / near-miss incidents ◦ spills, releases, ◦ injuries,
AERIAL IMAGERY Part I Lt Col James Babbitt, CAP A5(XP)/Plans and Programs Maryland Wing With recognition and appreciation to Texas Wing from whose Mission.
Tips for Taking the Computer-Based FSA ELA Reading Assessments For Grades 5–10 1.
Taking Better Photos 15 Tips You Can Try. Move in CLOSER.  Take a few steps closer.  Use the zoom lens to zoom in.  Most people leave too much “dead.
Hotel fires – a guide to survival LLOYD’S REGISTER ASIA Hotel Fires – a guide to survival Based on a briefing from a veteran Los Angeles Fireman.
Flight Planning 1.Master clock is outside the flight planning room (hangar) Mini Air Observer. 2.Master time is GPS time plus 2 hrs = Local time. 3.Times.
US IL Flying Club June 1 st, VERSION 4.
PRIVATE PILOT STEEP TURNS. Objective: STEEP TURNS Objective: –To develop smoothness, coordination, orientation, division of attention, and control techniques.
AVAT11001: Course Outline 1.Aircraft and Terminology 2.Radio Communications 3.Structure, Propulsion, Fuel Systems 4.Electrical, Hydraulic Systems and Instruments.
Circling Pattern (Left Side Camera) Worksheet Target Coordinates______________ Altitude__________ Airspeed________ Time of Day___________________ Weather______________________.
Lecture 7: Global Positioning System (GPS)
Slow Flight Chris Evans.
Lecture 4: Global Positioning System (GPS)
Beginning Cross Country Thomas Knauff Ridge Soaring Gliderport Julian, Pa
Chapter 2 Getting Started. Good Quality Video Head Room Head Room.
Camera Movement  Camera Movement should be purposive  Guiding the viewers the way you want them to see particular object.  Random and frequent camera.
Travel Photography Some useful advice. Keep it simple Unnecessary gear can be a burden, so before you go, check whether there are any items that you aren’t.
Tips for Taking Good Pictures. shoot from different perspectives up high down low getting in close stepping back for a wider shot moving around your subject.
Navigation Systems The Ten most important steps for achieving a highly accurate fix for a Private Aid to Navigation. PART A. 1 Prepared by the Navigation.
Navigational Elements. Discussion What other steps do you think the American pilots could have taken to navigate to friendly territory? Read page 262.
SOME THINGS TO REMEMBER WHEN TAKING PHOTOS Photography Tips All photos in this slideshow are courtesy of
The Camera - MODES - An Introduction to. Most photographers don’t use anything else other than the AUTOMATIC MODE on their camera This is a information.
Overview Member knowledge of proper ground handling enables NESA to conduct safe operations and prevent unnecessary injury and/or damage to equipment.
Photography (the very basics).
Mission Aircrew Course Search Planning and Coverage
Photography (the very basics).
Lazy Eights.
Basic Camera Settings.
Getting started.
Circling Pattern (Left Side Camera) Worksheet
Pre-Solo Training Program
Air Navigation & Mission Planning
Pre-Solo Training Program
Pre-Solo Training Program
Presentation transcript:

Nikon D200 Training Part 2 Flying the Mission Civil Air Patrol TX-413 Nighthawk Squadron

Getting good pictures is a team effort of the whole crew. The cockpit of the photo plane can be a busy place so good crew briefings and communications is critical. Safety must always come first. Any crew member can call off the particular maneuver or the entire mission if it appears that it cannot be done safely and within everyone’s comfort range. Introduction

Choose a day with no turbulence, clear skies and good visibility (no haze) Carefully study the charts for restricted or controlled airspace in the area of your photo shoot Study the POH for limitations such as stall speed, window opening speeds, etc. Make sure you have plenty of fuel, as photo shoots can run over their planned time Mission Planning

When planning, allow plenty of time to look over the target after the ID pass to decide the best altitudes, angles and directions you’ll need to fly to get the best shots. If the customer really doesn’t know exactly what they want (e.g., they just want you perform damage assessment and take video or photos), plan extra time after the ID Pass for a recon survey of the damage; the crew will then decide what pictures are needed and how to get them. Also remember that the more pictures you take the better chance you have of getting the required shots; therefore, allow for plenty of time over the target. Also, plan extra time to reposition the aircraft and re-shoot some images. Mission Planning

Plan extra time to review the images and reposition the aircraft to re-shoot one image. A good rule of thumb is to allow: 5 minutes to assess the target during the ID pass At least 15 minutes to fly an imaging pattern (the Bird’s Eye may take more time to determine the proper altitude for the shot) 5 minutes to review the images 10 minutes to re-position the aircraft to re-shoot one of the images Determine if a refueling stop will be necessary to safely complete the sortie. Mission Planning

Weather can be more of a factor in aerial photography than in other missions (e.g., overcast or high clouds can affect the quality of your shots). Get as much information as you can, especially in the target area. If a front is passing through, it may be best to delay launch in order to improve your chances for a successful imaging mission Mission Planning

Determine Photography Log requirements and brief the Observer/log keeper on data needed and how the Mission Pilot and photographer will communicate this information. If necessary (for example, you don’t know what to expect over as damage assessment target area), discuss whether or not to draw a sketch of the target area to aid in planning your imaging patterns. Mission Planning

The 4-Square imaging pattern is the standard imaging pattern for most missions, as it is the simplest and most stable pattern that results in very good images. The Bird’s Eye (Overview) pattern is used to show an overview of a target or when images need to show detail between structures (e.g., between buildings or between trees). This pattern is also used when the customer wants to use georeferencing. The Circling pattern is more difficult to master, particularly if the videographer is shooting out the right-side window. This pattern is good for taking quick shots of multiple targets, and can be used if a quick survey of wide-spread damage is needed by staff to determine resource needs and plan more detailed sorties. The 45° Angle to Target pattern is used when the customer specifically asks for these types of images. Target Flight Patterns

Aerial Imaging flight patterns are always flown at 1000' AGL or higher, and never at speeds below V x How the Mission Pilot maneuvers the aircraft into the proper position for each shot is very important. The approach to the imaging pattern should be stable, and the photographer must be given enough time to analyze current conditions and set up for the photo run. Every imaging pattern starts with an “ID Pass” that allows you to verify the target and note its coordinates. Examine the target and its surroundings, and decide how to frame your photos in the upcoming passes Also ensure you are at the right altitude to get the desired photo Target Approach

4 Square Pattern

Bird’s Eye Pattern

Circling Pattern

45 Angle to Target Pattern

Aircraft commander Fly the photo shoot as smoothly as possible, never making quick changes in bank or pitch, making roll-ins and roll-outs very slowly and no more than 20 0 of bank Mission Pilot Duties

The Mission Pilot must always strive to put the photographer in the proper position for a shot. Small adjustments, not obvious to the pilot, must often be made to get the right angle or position. Lifting the wing, moving the strut out of the frame or making minor course (heading) changes are the most common adjustments Mission Pilot Duties

The first pass by the target is very important. This is the time to determine: You are at the correct altitude (angle) for best results You are looking in the right direction for best results You are at the correct distance from the target You are flying at the correct speed Whether or not you need to (and can) use the zoom to properly frame the photo If any of these conditions aren’t met, go around, correct the problem, and redo the first pass. Mission Pilot Duties

May be the Mission Commander. In cooperation with the MP plans the best approach and pattern to get the shots needed. Mission Photographer Duties

The first pass by the target is very important. This is the time to determine: You are at the correct altitude (angle) for best results You are looking in the right direction for best results You are at the correct distance from the target You are flying at the correct speed Whether or not you need to (and can) use the zoom to properly frame the photo If any of these conditions aren’t met, go around, correct the problem, and redo the first pass. Mission Photographer Duties

Keeps the photo log and sketches Maintains awareness outside the cockpit while the MP flies the target pattern Assists the MP in maintaining safe airspeed and altitude while flying the target pattern May be the navigator May operate the radios Mission Observer Duties

The pilot must be aware maneuver adjustments may be necessary, and the photographer must know how to direct the pilot. Keep the directions clear and simple such as: Turn left Turn right Straight ahead Hold this course Lift your wing Move the strut forward Left 10° This tells the pilot all they need to know Crew Communication

The pilot also needs positive feedback, especially if you are shooting out of the right-side windows. Use simple words such as “good track” or good speed” to let the pilot know they’re on the right track and speed Finally, tell the pilot when the adjustments are no longer required by saying something like “OK, I have the shots” Crew Communication

The photographer also has to clearly and concisely communicate their intentions and actions to the Observer/log keeper. If the photographer will be taking several photos per leg, they should tell the Observer/log keeper “the following photos will be taken looking east (or looking northeast or looking between the northern-most buildings), then call out “shot 1, shot 2, …..” This allows the Observer/log keeper to quickly and accurately log the photos. Crew Communication

The photographer must decide whether the pictures satisfy all mission requirements. Don’t be afraid to admit that you didn’t get a particular shot, and ask the Mission Pilot to reposition for another try. Never hesitate to make another pass or to reposition the aircraft to ensure a good photo, and don’t let any other crewmember rush you. Remember, you should take as many photos as you think you need to fulfill mission requirements. There’s plenty of room on your storage media, and the extra time you spend doing this on-scene is much less expensive and time-consuming than having another sortie go back to the target because you didn’t get the right images Crew Communication

Every aerial photo shoot begins with a mission briefing which may take more time than the actual mission. It should cover: WeatherAirspace Launch and shoot timesTarget location Fuel enduranceAltitudes AirspeedsTarget approach and ID Lost sight proceduresPhoto requirements CommunicationCrew duties SAFETY Conducting an Imaging Sortie

Clean the aircraft windows before you leave, and make sure you have cleaning supplies on board. If you will be shooting out the right front window of the aircraft, remove the window holding screw from the brace and replace it in place. DO NOT PUT IT IN YOUR POCKET AND TAKE IT HOME! Enter any waypoints into the GPS before takeoff. Set up and test the Audio Panel and Intercom. Check the imaging equipment. Note: A shot of the aircraft ‘N’ number with the camera or camcorder provides a good “starting image” for the sortie, particularly if there are images on your media card or tape from a previous sortie Arrange your equipment for easy access, but ensure lightweight objects such as charts and logs are not lying loose where they can be blown about the cabin when you open a window to take pictures. Conducting an Imaging Sortie

Using the Imaging Sortie Checklist, discuss: Transit to the target area Approaching the target ID Pass On scene survey if a damage assessment mission Preparing to enter the pattern Taking the photos Determining success or failure After-sortie actions Debrief and complete paperwork including e104 and fuel receipt upload Conducting an Imaging Sortie

Turn on pulse lights and strobes to maximize your visibility so others can "see and avoid." Note: You may need to turn off the strobe lights so they will not affect the photos, particularly in low-overcast conditions Review sortie objectives and crew communications, and set the audio panel and intercom for imaging pattern communications. Double-check radio and navigational settings and check navigational equipment against each other (detect abnormalities or failures). Conducting an Imaging Sortie

Update your altimeter setting as you approach the target area. Stabilize at ‘Target ID Pass’ heading, altitude and airspeed (not < V x ) at least two miles out. This allows time for everyone to get set for the photo shoot, and gives everyone the opportunity to see what visibility and turbulence conditions will be encountered over the target area When you pass over the target, log the latitude and longitude and verify you have the right target. Conducting an Imaging Sortie

Determine if lighting conditions are acceptable; if not, determine whether or not to proceed with the sortie. Verify that what you see is what you planned for and that you can properly frame the target; if not, have the Mission Pilot pick a safe location to loiter and re-plan how to perform the imaging run (e.g., determine the altitude, angle and directions you need to get the best photos) and how you wish to frame your photos.. Conducting an Imaging Sortie

If needed, perform a damage survey and plan the imaging pattern (s) necessary to fully document the damage. May need to sketch the damage area as an aid to planning May need more than one run to fully capture the damage May need to take photos from different altitudes and angles Reassess your fuel status and plan a refueling stop if needed Update Mission Base on your new sortie time assumptions. Conducting an Imaging Sortie

Fly at least 1000' AGL during daylight and at least 2000' AGL at night, and no slower than V x Ensure you’re flying slowly enough to allow the photographer to get several photos from each angle or side of the imaging pattern (usually kts).. Conducting an Imaging Sortie

The Cessna is a great handling plane at slow speeds but you can get too slow. Ask the Observer to call out airspeed every 5 knots if you get below 90 KIAS and call out altitude if you get below 1000’ AGL. Before you get too slow or low go around and start over. Conducting an Imaging Sortie

We always need smooth air to minimize camera shake and relative motion between the aircraft and the target. If you are circling a target consider climbing at 50 – 100 fpm so you don’t fly through your own wake Conducting an Imaging Sortie

Photographer check that the camera is on; it may have automatically turned itself off. Don’t confuse this with the ‘sleep’ mode where the camera turns off the LCD to conserve power; a quick touch of the zoom switch will wake the camera Observer readies the Photo Log and/or Recon Sketch Sheet. All crew secure loose items (e.g., charts) in the cabin and then open the window. Conducting an Imaging Sortie

Fly your shoot as planned or adjusted Pick a safe place to loiter while the photographer reviews the photos. The photographer usually knows whether they got all the required shots, and the Observer can back them up by checking the Photo Log. However, you must check and make sure because you don’t want to fly all the way back to mission base and then discover that you missed a shot, or that your shots weren’t framed properly. Plan and re-shoot as necessary. Conducting an Imaging Sortie