WebCCTV 1 Contents Introduction Getting Started Connecting the WebCCTV NVR to a local network Connecting the WebCCTV NVR to the Internet Restoring the WebCCTV NVR Storage & Bandwidth considerations Security Policy Troubleshooting

WebCCTV 2 Restoring the WebCCTV NVR Saving the configuration Restoring the pre-installed software

WebCCTV 3 Restoring the WebCCTV NVR Saving the configuration Use the “ Save Settings ” CD 1. Open the web application 2. Go to the ‘ System ’ menu 3. Click the ‘ System Info ’ menu item 4. Click the button ‘ Save Configuration ’ WebCCTV NVR will restart 5. ‘ Save As ’ window appears, choose location to save and click ‘ Save ’ 6. Write this XML file to the writable CD (provided with every WebCCTV NVR) 7. Put the CD back inside the unit.

WebCCTV 4 Restoring the WebCCTV NVR Restoring the pre-installed software When to use Crashed harddisk and replaced by new WebCCTV doesn ’ t start anymore Nobody remembers the Administrator password You received fresh/new WebCCTV system software How to use (3 steps) 1.Copying raw content from re-installation CD to WebCCTV NVR + answering a few questions 2.Automatic preparation of raw content 3.Manual activation (if not yet done in step 1) and restore the previously saved configuration to become a fully functional Video Server

WebCCTV 5 Restoring the WebCCTV NVR Restoring the pre-installed software Step 1 1.Locate the CD bag : the inside cover of the WebCCTV NVR 2.Take the ‘ re-installation ’ CD out and insert it in the CD Drive of the WebCCTV NVR 3.Turn power off and on, wait until the WebCCTV NVR boots from the ‘ re-installation ’ CD 4.Answer all questions asked 5.A progress bar will show up, wait until the whole CD has been copied 6.The end of the copy process is marked by a continuous beep 7.Turn the power off and on again 8.Take the CD out of the CD Drive 9.Let the WebCCTV NVR boot from the harddisk.

WebCCTV 6 Restoring the WebCCTV NVR Restoring the pre-installed software Step 2 The WebCCTV NVR will now pass through 4 automatic preparation stages Mouse and Keyboard are disabled to avoid interference. Do not use them until the final logon screen appears This is a fully automatic procedure. Don ’ t react to any windows or message boxes popping up, even though you will be prompted to do so!

WebCCTV 7 Restoring the WebCCTV NVR Restoring the pre-installed software Step 3 1.You should see the Windows logon screen 2.Logon using the default username and password : Username: Administrator Password: webcctvnvr 3.If you didn ’ t activate your WebCCTV NVR during step 1, activate it now by double-click the icon ‘ webclient ’ on the desktop 4.An authorization request will be shown. Submit this to Quadrox or your supplier and a correct activation code will be generated. 5.Once activated, go to the ‘ System ’ pages, choose ‘ System info ’ 6.To restore the previously saved settings, insert the ‘ Save Settings ’ CD into the CD Drive of the WebCCTV NVR. 7.Click the button ‘Restore Configuration’. ‘Open’ window appears 8.Select the saved configuration file and click ‘Open’